[9] AIR CIRCULATION:
[10] SEAT HEATING/COOLING:
Warning: Re-circulated air can cause the interior
glass to mist up in cold or rainy weather. If demisting is
required, use the air conditioning.
Warning: Do not press the seat heater switch repeatedly.
This can cause the seat to become very hot and can cause
burn injuries to persons with limited sensitivity to
temperature changes.
Controls the source of air entering the vehicle. Press to select re-
circulated air (button LED ON). Press and hold for more than two
seconds to close the windows.
• Seat Heating (standard):
Press to cycle the seat heating level on the driver or
passenger seats. The LEDs show which heating level is set,
where the higher the number of LEDs illuminated, the
greater the heating level.
Press again to select outside air as source (button LED off). Press
and hold for more than two seconds and the windows will open
to their last position1.
• Seat Cooling (optional):
Use the re-circulated air position when going through tunnels,
driving in congested traffic (high engine exhaust areas) or when
maximum cooling is required.
Press to cycle the seat cooling level on the driver or
passenger seats. The LEDs show which cooling level is set,
where the higher the number of LEDs illuminated, the
greater the cooling level.
Outside air is used as the default air source and should be used
for normal conditions and demisting.
If windows were open before selecting re-circulated air.
1.
Climate Control 6.3