Get Quick Start Guide for Aston Martin Dbx SUV 2020

Vehicle Key

What Do The Buttons On The Key Do?

Global Close

(Refer to ’Vehicle Key’, page 2.2)

Press and hold

windows.

to unlock all vehicle doors and open all

to lock all doors and close all windows.

Press and hold

Keyless Entry

To unlock the vehicle, fully push the front edge of the door

handle. If the system recognises a valid key signal, the door will

unlock and open.

To lock the vehicle, close all the vehicle doors and press the rear

edge of the door handle to activate the lock switch.

[1] LOCK: Press to lock the vehicle and arm the security

system.

[2] UNLOCK: Press to unlock either the driver's door or

the vehicle.

[3] TAILGATE: Press to operate the powered tailgate.

1.2 Quick Start

Driving Position

[1] BOLSTER/LUMBAR ADJUSTMENT SELECTOR SWITCH

(OPTIONAL): Press the switch up to select lumbar adjustment.

Press down to select bolster adjustment.

How Do I Adjust The Seat?

(Refer to ’Seat Adjustment’, page 3.2)

[2] BOLSTER/LUMBAR ADJUSTMENT: Use the directional pad

to adjust the position of the lumbar or bolster support.

[3] SEAT POSITION ADJUST: Seat forward/backward and height

adjust. Raise front to tilt base of seat.

[4] SEAT BACKREST ADJUST: Seat back angle adjust.

[5] MEMORY SEAT POSITIONS: Use to select or store memory

positions for the seat, steering column and door mirror positions .

Quick Start 1.3

What Do The Door Switches Do?

How Do I Use The Memory Positions?

(Refer to ’How Do I Use The Memory Positions?’, page 1.4).

Setting a Position

Adjust the seat, steering column and the door rear view mirrors

to the desired position. Push the memory button (M), then press

the required memory channel (1, 2 or 3) to save the positions. A

chime is heard and a message will show in the message centre to

confirm. By repeating these steps and pressing an unused button,

a second and third driving position can be saved in the memory.

Recalling a Memory Position

Once in the seat press and hold button 1, 2 or 3 (depending on

which saved channel is required) until all movement is stopped.

The seat will move to the saved position.

Seat and steering wheel movement will be interrupted if the

memory channel button is released. Exterior mirror movement

will continue. Press and hold the memory channel button to

complete seat and steering wheel movement.

[A] DOOR MIRROR SELECTOR: Press to select left or right door

mirror (Refer to ’Exterior Mirrors’, page 3.8).

[B] DOOR MIRROR ADJUSTMENT: Use the direction pad to

adjust the mirror position.

[C] WINDOW SWITCH: Press or pull to operate the driver or

passenger windows (Refer to ’Windows’, page 3.5).

[D] WINDOW LOCK: Press to disable rear passenger window

switches and rear climate control switches.

1.4 Quick Start

Vehicle Controls

[1] HAZARD WARNING SWITCH: Press to set the hazard

warning lamps on or off.

What Do The Lower Switches Do?

[2] MODE UP: Move up through drive modes.

[3] MODE DOWN: Move down through drive modes.

[4] ACCESS MODE: Press to lower the vehicle for easy access

when road speed is below 4 km/h (3 mph)₁(Refer to ’Access

mode’, page 2.10).

[5] HILL DESCENT CONTROL: Press to active Hill Descent

system.

[6] PASSENGER AIRBAG STATUS: Indicator to show if the

passenger airbag is active.

[7] VOLUME CONTROL: Use the roller dial to adjust the audio

volume. Press to mute audio.

[8] INFOTAINMENT ON/OFF: Press to turn Infotainment system

on or off.

[9] LANE KEEP ASSIST: Use the set lane keep assist system to on

or off.

[10] STOP/START: Press to turn the Eco stop/start system on or

off.

[11] PARK DISTANCE CONTROL: Press to set the Park Distance

Control (PDC) sensors to on or off.

[12] CAMERA/PARK ASSIST: Changes the infotainment system

display to the camera system. Press and hold to start Active Park

Assist.

The vehicle will return to normal ride height when road speed is higher

1.

than 8 km/h (5 mph).

Quick Start 1.5

[1] CONTROL DIAL:

What Does The Control Dial Do?

Use to navigate through menus in the infotainment system. Press

down to confirm a selection (referred to as ENTER throughout this

handbook).

[2] TOUCH PAD:

Touch sensitive pad which can be used to navigate menus in the

infotainment system. Press down to confirm a selection. The

touch pad can also be used for handwriting recognition (Refer to

’Touch Pad’, page 4.8).

[3] HOME/FAVOURITE:

Press to open the main infotainment menu. Press and hold

to add the current menu item to the global favourites list.

[4] QUICK ACCESS MENU:

Press to access the quick access menu.

[5] BACK:

Press to go back a level in the menu.

1.6 Quick Start

[1] CAN:

What Are The Steering Wheel Controls?

Switches

Press to cancel the set speed.

[2] ACC/VARIABLE SPEED LIMITER SELECT:

Press to switch between Adaptive Cruise Control (ACC) and

variable speed limiter function.

[3] INCREASE DISTANCE:

Increases the set distance between the vehicle in front and your

vehicle.

[4] SPEED SET SWITCH:

Push up to increase or down to decrease the set speed for the

ACC or variable speed limiter. Press the rocker switch to resume

the set speed.

[5] DECREASE DISTANCE:

Decreases the set distance between the vehicle in front and your

vehicle.

[6] CALL:

Press to answer an incoming call or open the last dialled number.

[7] END CALL:

Press to end a call or reject an incoming call.

Quick Start 1.7

[8] START VOICE CONTROL:

Press to start voice control (Refer to ’Voice Control’, page 4.15).

[9] MENU HOME/BACK:

Press to open the instrument cluster menu (Refer to ’Instrument

Cluster Menu’, page 4.13). Press again to go back one level in the

instrument cluster menu. Press and hold to return to the home

menu.

[10] MENU SCROLL BUTTONS:

Roll the menu scroll wheel up or down to navigate the instrument

cluster menu. Press the scroll wheel button to select an item in

the menu (referred to in this handbook as OK).

[11] VOLUME DOWN:

Press the volume down button to decrease the volume of the

audio system, or call volume during a phone call. Press and hold

to mute audio.

[12] VOLUME UP:

Press the volume up button to increase the volume of the audio

system, or call volume during a phone call.

1.8 Quick Start

Transmission Paddles

What Do The Stalks Control?

Indicators and Headlamp Beam

Main Beam

Push the stalk for main beam headlamps. Pull the stalk back to

the initial position to return to dipped beam headlamps.

[1] : Downshift Paddle

Flash Headlamps

[2] : Upshift Paddle

Pull the stalk to flash the main beam headlamps.

Direction Indicators

P (Park) and R (Reverse) are selected with the PRND buttons.

Press up to briefly indicate a right turn and down for a left turn.

Press until the switch latches to hold the selected indicator on.

Quick Start 1.9

Wiper Controls

How Do I Turn On The Exterior Lamps?

Rotate the wipe speed selector (A) to select a wipe speed.

[1] : Windscreen wipers OFF

[1] : Left side park lamp

[2] : Right side park lamp

[2] : Intermittent wipe (low rain sensor sensitivity)

[3] : Intermittent wipe (high rain sensor sensitivity)

[4] : Continuous wipe (slow)

[3] : Side lamps (including number plate lamps)

[4] : Automatic headlamp mode

[5] : Dipped beam headlamps

[6] : Rear foglamp

[5] : Continuous wipe (fast)

[6] : Press for single wipe. Press and hold to operate the front

windscreen washers.

1.10 Quick Start

Infotainment

How Do I Pair A Bluetooth Device

What Can I Listen To?

(Refer to ’Pairing a Device’, page 9.2)

Radio

To add a new Bluetooth® ₁device, select Telephone from the

Select Radio from the main menu.

main menu, select Devices and select Connect a new device.

Select Search from system or Search from device.

Push the CONTROL DIAL sideways to open the radio menu and

select Station List.

Search From System

Portable Media Audio

Select a device and press ENTER. Follow the instructions shown

Select Media from the main menu.

on the phone and the infotainment display to pair the device.

The Now Playing screen shows track information such as album

art, artist and album name on the left side of the screen along

with track play time and track number. Media source device and

track name are shown on the right side of the screen.

Search From Device

Select AML Bluetooth #####₂from the list of available devices

on the Bluetooth® device.

If AML Bluetooth ##### does not show, check that

Bluetooth® is active in the infotainment system and search again.

Follow the instructions shown on the phone and the infotainment

display to pair the phone.

The Bluetooth® word mark and logos are registered trademarks

1.

owned by Bluetooth SIG, Inc., and any use of such marks by Aston

Martin is under license. Other trademarks and trade names are those of

their respective owners.

A unique 5 digit number is given for each vehicle.

2.

Quick Start 1.11

How Do I Set A Navigation Destination?

Select Nav from the main menu.

Push the CONTROL DIAL sideways to open the navigation menu

and select Enter Destination to begin entering an address.

1.12 Quick Start

Quick Start for Your Aston Martin Dbx SUV 2020

Popular Manuals