Quick Start -> Vehicle Controls for Your Aston Martin Dbx SUV 2020

Vehicle Controls  
[1] HAZARD WARNING SWITCH: Press to set the hazard  
warning lamps on or off.  
What Do The Lower Switches Do?  
[2] MODE UP: Move up through drive modes.  
[3] MODE DOWN: Move down through drive modes.  
[4] ACCESS MODE: Press to lower the vehicle for easy access  
when road speed is below 4 km/h (3 mph)1(Refer to ’Access  
mode’, page 2.10).  
[5] HILL DESCENT CONTROL: Press to active Hill Descent  
system.  
[6] PASSENGER AIRBAG STATUS: Indicator to show if the  
passenger airbag is active.  
[7] VOLUME CONTROL: Use the roller dial to adjust the audio  
volume. Press to mute audio.  
[8] INFOTAINMENT ON/OFF: Press to turn Infotainment system  
on or off.  
[9] LANE KEEP ASSIST: Use the set lane keep assist system to on  
or off.  
[10] STOP/START: Press to turn the Eco stop/start system on or  
off.  
[11] PARK DISTANCE CONTROL: Press to set the Park Distance  
Control (PDC) sensors to on or off.  
[12] CAMERA/PARK ASSIST: Changes the infotainment system  
display to the camera system. Press and hold to start Active Park  
Assist.  
The vehicle will return to normal ride height when road speed is higher  
1.  
than 8 km/h (5 mph).  
Quick Start 1.5  
[1] CONTROL DIAL:  
What Does The Control Dial Do?  
Use to navigate through menus in the infotainment system. Press  
down to confirm a selection (referred to as ENTER throughout this  
handbook).  
[2] TOUCH PAD:  
Touch sensitive pad which can be used to navigate menus in the  
infotainment system. Press down to confirm a selection. The  
touch pad can also be used for handwriting recognition (Refer to  
’Touch Pad’, page 4.8).  
[3] HOME/FAVOURITE:  
Press to open the main infotainment menu. Press and hold  
to add the current menu item to the global favourites list.  
[4] QUICK ACCESS MENU:  
Press to access the quick access menu.  
[5] BACK:  
Press to go back a level in the menu.  
1.6 Quick Start  
[1] CAN:  
What Are The Steering Wheel Controls?  
Switches  
Press to cancel the set speed.  
[2] ACC/VARIABLE SPEED LIMITER SELECT:  
Press to switch between Adaptive Cruise Control (ACC) and  
variable speed limiter function.  
[3] INCREASE DISTANCE:  
Increases the set distance between the vehicle in front and your  
vehicle.  
[4] SPEED SET SWITCH:  
Push up to increase or down to decrease the set speed for the  
ACC or variable speed limiter. Press the rocker switch to resume  
the set speed.  
[5] DECREASE DISTANCE:  
Decreases the set distance between the vehicle in front and your  
vehicle.  
[6] CALL:  
Press to answer an incoming call or open the last dialled number.  
[7] END CALL:  
Press to end a call or reject an incoming call.  
Quick Start 1.7  
[8] START VOICE CONTROL:  
Press to start voice control (Refer to ’Voice Control’, page 4.15).  
[9] MENU HOME/BACK:  
Press to open the instrument cluster menu (Refer to ’Instrument  
Cluster Menu’, page 4.13). Press again to go back one level in the  
instrument cluster menu. Press and hold to return to the home  
menu.  
[10] MENU SCROLL BUTTONS:  
Roll the menu scroll wheel up or down to navigate the instrument  
cluster menu. Press the scroll wheel button to select an item in  
the menu (referred to in this handbook as OK).  
[11] VOLUME DOWN:  
Press the volume down button to decrease the volume of the  
audio system, or call volume during a phone call. Press and hold  
to mute audio.  
[12] VOLUME UP:  
Press the volume up button to increase the volume of the audio  
system, or call volume during a phone call.  
1.8 Quick Start  
Transmission Paddles  
What Do The Stalks Control?  
Indicators and Headlamp Beam  
Main Beam  
Push the stalk for main beam headlamps. Pull the stalk back to  
the initial position to return to dipped beam headlamps.  
[1] : Downshift Paddle  
Flash Headlamps  
[2] : Upshift Paddle  
Pull the stalk to flash the main beam headlamps.  
Direction Indicators  
P (Park) and R (Reverse) are selected with the PRND buttons.  
Press up to briefly indicate a right turn and down for a left turn.  
Press until the switch latches to hold the selected indicator on.  
Quick Start 1.9  
Wiper Controls  
How Do I Turn On The Exterior Lamps?  
Rotate the wipe speed selector (A) to select a wipe speed.  
[1] : Windscreen wipers OFF  
[1] : Left side park lamp  
[2] : Right side park lamp  
[2] : Intermittent wipe (low rain sensor sensitivity)  
[3] : Intermittent wipe (high rain sensor sensitivity)  
[4] : Continuous wipe (slow)  
[3] : Side lamps (including number plate lamps)  
[4] : Automatic headlamp mode  
[5] : Dipped beam headlamps  
[6] : Rear foglamp  
[5] : Continuous wipe (fast)  
[6] : Press for single wipe. Press and hold to operate the front  
windscreen washers.  
1.10 Quick Start