Vehicle and System Settings -> Vehicle for Your Aston Martin Dbx SUV 2020

Vehicle  
Climate Control:  
Opens the Climate menu (Refer to ’Climate Menu’, page  
6.6).  
Drive Modes  
Individual:  
Allows a driver to create their own vehicle drive mode preset.  
Choose a preferred setting for Suspension, Steering, Drive and  
Exhaust system.  
User notification:  
Set if an notification is given in the infotainment screen when  
the drive mode is changed.  
Engine data:  
Displays battery voltage, engine power, engine torque and oil  
temperature.  
Drive Modes:  
Opens the Drive modes and vehicle information menus.  
Assistance:  
Opens the Assistance menus.  
Consumption:  
Shows fuel consumption.  
Light Settings:  
Opens the Light settings menu.  
Vehicle Settings:  
Opens the Vehicle settings menu.  
Vehicle data:  
Shows various vehicle data such as throttle position, steering  
wheel angle and brake application. Information shown may  
vary with drive mode.  
10.2 Vehicle and System Settings  
Cam & Park Assist:  
Assistance  
Manoeuver Assist:  
Set Rear Cross Traffic Warning and Drive Away Assist  
functions to on or off.  
Set warning tone:  
Opens the Parking audio menu (Refer to ’Audio’, page  
10.6).  
Auto reverse camera:  
Set if reverse camera is automatically shown when reverse  
gear is selected.  
ESP:  
Set ESP to On or Off.  
Traffic Sign Assist:  
(Refer to ’Traffic Sign Assist’, page 5.22)  
Adopt limit:  
Set the speed in the variable speed limiter to match the  
speed limit found by the Traffic Sign Assist. Requires  
variable speed limit to be active (Refer to ’Adaptive Cruise  
Control (ACC) with Speed Limiter’, page 5.11).  
Display on screen:  
Open camera cover:  
Opens the cover for the rear camera so that the lens can  
be cleaned.  
Active Brake Assist:  
Select between Early, Medium, Late or Off.  
Lane Keep Assist:  
(Refer to ’Lane Keep Assist’, page 5.19)  
Select between Adaptive, Standard or Off.  
Blind Spot Assist:  
Select to show traffic information on infotainment screen.  
Speed Warning:  
Select whether speed warnings are given as Visual &  
audible, Visual or None.  
Warning threshold:  
Select a speed threshold for when warnings are given.  
(Refer to ’Blind Spot Assist’, page 5.16)  
Set Blind Spot Assist to On or Off.  
Vehicle and System Settings 10.3  
Light Settings  
Vehicle Settings  
Ambient light:  
Winter tires limit:  
Open the ambient light settings menu.  
Daytime driving lights:  
Sets a maximum vehicle speed for when winter tires are  
fitted.  
Set daytime driving lights to on or off.  
Surround lighting:  
Set if the surround lighting function is set to on or off (Refer to  
’Surround Lighting’, page 4.18).  
Exterior light shut-off:  
Standby mode:  
Set the vehicle into standby mode where non essential  
systems are shut down to extend battery life when the vehicle  
is not used for extended periods of time.  
Tow-Away Protection:  
Set a time delay for how long the exterior lights stay on after  
ignition off1.  
Sets the vehicle tilt sensor for the alarm on or off.  
Interior motion sensor:  
Sets the interior motion sensors for the alarm on or off.  
Acoustic Lock:  
Set if the vehicle audibly confirms when it is locked2.  
Interior light shut-off:  
Set a time delay for how long the interior lights stay on after  
ignition off.  
Auto. fold-in mirrors  
Set so that the mirrors fold in when the vehicle is locked.  
Automatic door lock:  
Set to lock the vehicle doors when the vehicle is driven above  
15 km/h (9 mph).  
Easy Entry/Exit:  
Set if the easy entry function is set to move Steering and seat,  
Steering or Off.  
Function only available when master lamp switch is set to AUTO.  
(market specific)  
2.  
1.  
10.4 Vehicle and System Settings