Easy Entry/Exit
Access mode
The Easy Entry/Exit function could cause an occupant to
become trapped and/or cause injury. Keep clear of the
steering wheel when the Easy Entry/Exit function is used.
Access mode is not available when a trailer is connected.
Repeated use of this feature in a short period of time may
cause the system to temporarily not function correctly and will
function as normal once the system has had opportunity to
pressurize again.
Easy Entry/Exit movement can be cancelled by moving the
adjustment lever for the steering column, seat switch or by
selecting a memory position.
To aid getting in an out of the vehicle, access mode lowers the
vehicle 50 mm (2 inches). To lower the vehicle, press the access
button (A). Press the button to lift the vehicle again. If the vehicle
is moving, the vehicle will lower once road speed is below 4 km/
h (3 mph).
To aid entry and exit from the vehicle, the steering wheel and
driver's seat can be set to move when the driver's door is
opened1. Steering wheel and seat will then remain in this
position until the vehicle is unlocked again and the driver's
seatbelt is buckled.
Easy Entry/Exit can also be set to only move the steering column
or turned off in the vehicle settings menu (Refer to ’Vehicle
Settings’, page 10.4).
The vehicle will return to normal ride height when road speed
is higher than 8 km/h (5 mph).
When the ignition set to off, the transmission in Park (P) and the driver's
1.
seatbelt unbuckled.
2.10 Vehicle Security