At a glance for Your BMW 3 Series 4 Door 2022

At a glance  
These overviews of buttons, switches and  
displays are intended to familiarize you with your  
vehicle. You will also become quickly acquainted  
with the available control concepts and options.  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
At a glance  
Cockpit  
Cockpit  
ment is also described that is not available in a  
vehicle, e. g., because of the selected optional  
equipment or country variant. This also applies  
for safety-related functions and systems.  
Vehicle equipment  
All standard, country-specific and optional  
equipment that is offered in the model series is  
described in this chapter. Therefore, equip‐  
All around the steering wheel  
1
2
3
4
5
Roller sunblindsꢀꢁ45  
Active Blind Spot Detec‐  
tionꢀꢁ111  
Rear window safety switchꢀꢁ44  
Power windowsꢀꢁ43  
Intelligent Safetyꢀꢁ102  
Exterior mirror operationꢀꢁ54  
Collision warning with City Brak‐  
ing functionꢀꢁ103.  
Glove compartment on the driver's  
sideꢀꢁ158  
Lane departure warningꢀꢁ109  
Driver assistance systems  
6
Lamps  
12  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
Cockpit  
At a glance  
Front fog lampsꢀꢁ92  
Parking lampsꢀꢁ89  
Low beamsꢀꢁ89  
Reduce distanceꢀꢁ122  
Increase distanceꢀꢁ122  
Cruise control rocker switchꢀꢁ127,ꢀꢁ121  
Instrument clusterꢀꢁ73  
9
Automatic headlamp con‐  
trolꢀꢁ90  
10 Steering wheel buttons, right  
Entertainment source  
Daytime running lightsꢀꢁ90  
Adaptive Light Controlꢀꢁ90  
High-beam Assistantꢀꢁ91  
Instrument lightingꢀꢁ92  
Volume  
Voice activationꢀꢁ24  
7
Steering column stalk, left  
Telephone, see user's manual for  
Navigation, Entertainment and  
Communication  
Turn signalꢀꢁ66  
Thumbwheel for selection listsꢀꢁ84  
High beams, head‐  
lamp flasherꢀꢁ66  
11 Steering column stalk, right  
Windshield wipersꢀꢁ66  
High-beam Assistantꢀꢁ91  
Roadside parking lampsꢀꢁ90  
Computerꢀꢁ84  
Rain sensorꢀꢁ67  
Clean the windshields and head‐  
lampsꢀꢁ68  
12  
Start/stop the engine and switch  
the ignition on/offꢀꢁ62  
8
Steering wheel buttons, left  
Store speedꢀꢁ126  
Auto Start/Stop functionꢀꢁ63  
Resume speedꢀꢁ128  
13 Horn  
Cruise control on/off, interrupt‐  
ingꢀꢁ127  
14  
Steering wheel heatingꢀꢁ56  
Active Cruise Control on/off, in‐  
terruptingꢀꢁ120  
15 Adjust steering wheelꢀꢁ56  
16 Unlock hoodꢀꢁ202  
13  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
At a glance  
Cockpit  
All around the center console  
1
2
3
4
Headlinerꢀꢁ15  
9
Parking brakeꢀꢁ65  
PDC Park Distance Controlꢀꢁ128  
Control Displayꢀꢁ16  
Ventilationꢀꢁ148  
10  
Rearview cameraꢀꢁ131  
Parking assistantꢀꢁ137  
Surround Viewꢀꢁ131  
Hazard warning systemꢀꢁ220  
Central locking systemꢀꢁ35  
11  
Driving Dynamics Controlꢀꢁ117  
DSC Dynamic Stability Con‐  
trolꢀꢁ115  
5
6
Glove compartmentꢀꢁ158  
Radio/CD/Multimedia, see user's manual  
for Navigation, Entertainment and Commu‐  
nication  
12 Automatic transmission selector  
leverꢀꢁ69  
7
8
Climate controlꢀꢁ143  
Manual transmission selector leverꢀꢁ69  
Controller with buttonsꢀꢁ16  
14  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
Cockpit  
At a glance  
All around the headliner  
1
2
3
Intelligent Emergency Re‐  
questꢀꢁ220  
4
5
Reading lampsꢀꢁ92  
Interior lampsꢀꢁ92  
Glass sunroof, poweredꢀꢁ45  
Indicator lamp, front passenger  
airbagꢀꢁ96  
15  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
 
At a glance  
iDrive  
iDrive  
Control Display  
Hints  
Vehicle equipment  
All standard, country-specific and optional  
equipment that is offered in the model series is  
described in this chapter. Therefore, equip‐  
ment is also described that is not available in a  
vehicle, e. g., because of the selected optional  
equipment or country variant. This also applies  
for safety-related functions and systems.  
To clean the Control Display, follow the  
care instructions.  
Do not place objects close to the Control  
Display; otherwise, the Control Display can  
be damaged.  
Switching off  
The concept  
1.  
Press the button.  
The iDrive combines the functions of a multi‐  
tude of switches. Thus, these functions can be  
operated from a central location.  
2. "Switch off control display"  
Using the iDrive during a trip  
To avoid becoming distracted and pos‐  
ing an unnecessary hazard to your vehicle's  
occupants and to other road users, never at‐  
tempt to use the controls or enter information  
unless traffic and road conditions allow this.◀  
Switching on  
Controls at a glance  
Press the controller again to switch the screen  
back on.  
Controls  
Controller with navigation system  
Select menu items and create settings.  
1. Turn.  
1
2
Control Display  
Controller with buttons and touchpad  
The buttons can be used to open the me‐  
nus directly. The controller can be used to  
select menu items and create the settings.  
16  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
   
iDrive  
At a glance  
2. Press.  
1. Turn.  
3. Move in four directions.  
2. Press.  
3. Move in two directions.  
Buttons on controller  
Press the but‐ Function  
ton  
MENU  
RADIO  
MEDIA  
Open the main menu.  
Opens the Radio menu.  
Opens the CD/Multimedia  
menu.  
NAV  
Opens the Navigation menu.  
Opens the Telephone menu.  
Displays the previous panel.  
Opens the Options menu.  
Buttons on controller  
TEL  
Press the but‐ Function  
ton  
BACK  
OPTION  
MENU  
Audio  
Open the main menu.  
Open audio menu last lis‐  
tened to, switch between au‐  
dio menus.  
Controller without navigation system  
Select menu items and create settings.  
TEL  
Opens the Telephone menu.  
17  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
At a glance  
iDrive  
Menu items in the Owner's Manual  
Press the but‐ Function  
ton  
In the Owner's Manual, menu items that can be  
selected are set in quotation marks, e.g.,  
"Settings".  
BACK  
Open previous panel.  
Opens the Options menu.  
OPTION  
Changing between panels  
After a menu item is selected, e.g., "Radio", a  
new panel is displayed. Panels can overlap.  
Operating concept  
Move the controller to the left.  
Opening the main menu  
The current panel is closed and the previ‐  
ous panel is displayed.  
Press the button.  
The previous panel is opened again by  
pressing the BACK button. In this case, the  
current panel is not closed.  
Move the controller to the right.  
A new panel is opened on top of the previ‐  
ous display.  
The main menu is displayed.  
All iDrive functions can be called up via the  
main menu.  
Selecting menu items  
White arrows pointing to the left or right indi‐  
cate that additional panels can be opened.  
Menu items shown in white can be selected.  
1. Turn the controller until the desired menu  
item is highlighted.  
View of an opened menu  
When a menu is opened, it generally opens  
with the panel that was last selected in that  
menu. To display the first panel of a menu:  
Move the controller to the left repeatedly  
until the first panel is displayed.  
Press the menu button on the controller  
twice.  
Opening the Options menu  
2. Press the controller.  
Press the button.  
The "Options" menu is displayed.  
18  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
iDrive  
At a glance  
The function is deactivated.  
Touchpad  
Some iDrive functions can be operated using  
the touchpad on the controller:  
Selecting functions  
1. "Settings"  
Additional options: move the controller to the  
right repeatedly until the "Options" menu is  
displayed.  
2. "Touchpad"  
3. Select the desired function.  
"Speller": letters and numbers, enter‐  
ing.  
Options menu  
The "Options" menu consists of various areas:  
"Map": operating the interactive map.  
"Browser": enter Internet addresses.  
Screen settings, e.g., "Split screen".  
This area remains unchanged.  
"Audio feedback": the entered letters  
and numbers are announced.  
Control options for the selected main  
menu, e.g., for "Radio".  
Entering letters and numbers  
If applicable, further operating options for  
the selected menu, e.g., "Store station".  
The entry of the letters requires some practice  
at the beginning. In the entry, pay attention to  
the following:  
Changing settings  
1. Select a field.  
For the entry of large/small letters and  
numbers, first convert via iDrive to the cor‐  
responding Input mode, refer to page 22.  
2. Turn the controller until the desired setting  
is displayed.  
Enter characters as they are displayed on  
the Control Display.  
Always enter accompanying signs, such as  
accents or periods so that the letter can be  
clearly recognized.  
To delete a character, slide to the left on  
the touchpad.  
Operating the interactive map  
3. Press the controller.  
The interactive map in the navigation system  
can be moved via the touchpad.  
Activating/deactivating the functions  
Several menu items are preceded by a check‐  
box. It indicates whether the function is acti‐  
vated or deactivated. Selecting the menu item  
activates or deactivates the function.  
The function is activated.  
19  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
At a glance  
iDrive  
4. Turn the controller until "Time/Date" is  
highlighted, and then press the controller.  
Function  
Interactive map.  
Controls  
Slide in the correspond‐  
ing direction.  
Enlarge/shrink in‐ Drag the display inwards  
teractive map.  
or outwards with the fin‐  
gers.  
Display menu.  
Tap once.  
Changing settings  
Settings on the control display, such as the  
volume, can be made via the touchpad. To do  
this slide to the left or right accordingly.  
5. Turn the controller until "Time:" is high‐  
lighted, and then press the controller.  
Example: setting the clock  
Setting the clock  
1.  
Press the button. The main menu is  
displayed.  
2. Turn the controller until "Settings" is high‐  
lighted, and then press the controller.  
6. Turn the controller to set the hours and  
press the controller.  
7. Turn the controller to set the minutes and  
press the controller.  
Status information  
Status field  
The following information is displayed in the  
status field at the top right:  
3. If necessary, move the controller to the left  
to display "Time/Date".  
Time.  
Current entertainment source.  
Sound output, on/off.  
Wireless network reception strength.  
Telephone status.  
Traffic bulletin reception.  
Status field symbols  
The symbols are grouped as follows.  
20  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
iDrive  
At a glance  
Radio symbols  
Additional symbols  
Symbol Meaning  
Symbol Meaning  
Satellite radio is switched on.  
Spoken instructions are switched  
off.  
Telephone symbols  
Symbol Meaning  
Split screen  
Incoming or outgoing call.  
General information  
Missed call.  
Additional information can be displayed on the  
right side of the split screen, e.g., information  
from the computer.  
Wireless network reception  
strength.  
In the divided screen view, the so-called split  
screen, this information remains visible even  
when you change to another menu.  
Symbol flashes: network search.  
Wireless network is not available.  
Bluetooth is switched on.  
Roaming is active.  
Switching the split screen on and off  
1.  
Press the button.  
Text message was received.  
Check the SIM card.  
2. "Split screen"  
Selecting the display  
SIM card is blocked.  
1.  
Press the button.  
SIM card is missing.  
2. "Split screen"  
Enter the PIN.  
3. Move the controller until the split screen is  
selected.  
Entertainment symbols  
4. Press the controller or select "Split screen  
content".  
Symbol Meaning  
CD/DVD player.  
5. Select the desired menu item.  
Music collection.  
Gracenote® database.  
AUX-IN port.  
USB audio interface/mobile phone  
audio interface.  
USB audio interface.  
Mobile phone audio interface.  
21  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
At a glance  
iDrive  
Programmable memory  
buttons  
General information  
The iDrive functions can be stored on the pro‐  
grammable memory buttons and called up di‐  
rectly, e.g., radio stations, navigation destina‐  
tions, phone numbers and entry points into the  
menu.  
To display short information: touch the  
button.  
The settings are stored for the remote control  
currently in use.  
To display detailed information: touch the  
button for an extended period.  
Without navigation system and  
telephone  
Only radio stations can be stored on the but‐  
tons, refer to user's manual for Navigation, En‐  
tertainment, Communication.  
Deleting the button assignments  
1. Press buttons 1 and 8 simultaneously for  
approx. five seconds.  
2. "OK"  
Saving a function  
1. Highlight the function via the iDrive.  
Entering letters and numbers  
2.  
Press the desired button for more  
than 2 seconds.  
General information  
1. Turn the controller: select letters or num‐  
bers.  
Running a function  
2. Select additional letters or numbers if  
needed.  
Press the button.  
The function will run immediately. This  
means, for example, that the number is dialed  
when a phone number is selected.  
3. "OK": confirm the entry.  
Depending on the menu, you can switch be‐  
tween entering upper and lower case, letters  
and numbers:  
Displaying the button assignment  
Symbol Function  
Use a finger to touch the buttons. Do not wear  
gloves or use objects.  
Press the controller: delete the let‐  
ter or number.  
The key assignment is displayed at the top  
edge of the screen.  
Press the controller for an extended  
period: delete all letters or numbers.  
Switching between cases, letters and  
numbers  
Depending on the menu, you can switch be‐  
tween entering upper and lower case, letters  
and numbers:  
22  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
 
iDrive  
At a glance  
Symbol  
or  
Function  
Enter the letters.  
Enter the numbers.  
Move the controller up.  
Without navigation system  
Select the symbol.  
Entry comparison  
Entry of names and addresses: the selection is  
narrowed down every time a letter is entered  
and letters may be added automatically.  
The entries are continuously compared to the  
data stored in the vehicle.  
Only those letters are offered during the  
entry for which data is available.  
Destination search: town/city names can  
be entered using the spelling of language  
available on the Control Display.  
23  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
At a glance  
Voice activation system  
Voice activation system  
Vehicle equipment  
Using voice activation  
All standard, country-specific and optional  
equipment that is offered in the model series is  
described in this chapter. Therefore, equip‐  
ment is also described that is not available in a  
vehicle, e. g., because of the selected optional  
equipment or country variant. This also applies  
for safety-related functions and systems.  
Activating the voice activation system  
1.  
Press the button on the steering  
wheel.  
2. Wait for the signal.  
3. Say the command.  
The command is displayed in the instru‐  
ment cluster.  
The concept  
This symbol in the instrument cluster indi‐  
cates that the voice activation system is active.  
Most functions that are displayed on the  
Control Display can be operated by spoken  
commands via the voice activation system.  
The system prompts you to make your en‐  
tries.  
If no other commands are available, operate  
the function in this case via iDrive.  
Terminating the voice activation  
system  
Functions that can only be used when the  
vehicle is stationary cannot be operated  
using the voice activation system.  
Briefly press the button on the steer‐  
ing wheel or ›Cancel‹.  
The system uses a special microphone on  
the driver's side.  
›...‹ Verbal instructions in the Owner's  
Manual to use with the voice activation  
system.  
Possible commands  
Most menu items on the Control Display can  
be voiced as commands.  
The available commands depend on which  
menu is currently displayed on the Control Dis‐  
play.  
Requirements  
Via the Control Display, set a language that is  
also supported by the voice activation system  
so that the spoken commands can be identi‐  
fied.  
Short commands exist for many functions.  
Some list entries, e.g., Phone book entries, can  
also be selected via the voice activation sys‐  
tem. Speak these list entries exactly as they  
are displayed in the respective list.  
Set the language, refer to page 87.  
Having possible commands read aloud  
You can have the available commands read out  
loud for you: ›Voice commands‹  
For example, if the "Settings" menu is dis‐  
played, the commands for the settings are  
read out loud.  
24  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
 
Voice activation system  
Via short command  
At a glance  
Executing functions using short  
commands  
Functions on the main menu can be performed  
directly by means of short commands, nearly  
irrespective of which menu item is currently  
selected, e.g., ›Vehicle status‹.  
Playback of the CD can also be started via a  
short command.  
1. Switch on the Entertainment sound output  
if necessary.  
List of short commands of the voice activation  
system, see Navigation, Entertainment, Com‐  
munication Owner's Manual.  
2.  
Press the button on the steering  
wheel.  
3. ›C D drive track ...‹, e.g., CD track 4.  
Help dialog for the voice activation  
system  
Calling up help dialog: ›Help‹  
Setting the voice dialog  
You can set whether the system should use  
the standard dialog or a shorter version.  
Additional commands for the help dialog:  
›Help with examples‹: information about the  
current operating options and the most im‐  
portant commands for them are an‐  
nounced.  
In the shorter variant of the voice dialog, the  
announcements from the system are issued in  
an abbreviated form.  
On the Control Display:  
›Help with voice activation‹: information  
about the principle of operation for the  
voice activation system is announced.  
1. "Settings"  
2. "Language/Units"  
3. "Speech mode:"  
4. Select the setting.  
Example: playing back a CD  
Via the main menu  
The commands of the menu items are spoken  
just as they are selected via the controller.  
1. Switch on the Entertainment sound output  
if necessary.  
2.  
Press the button on the steering  
wheel.  
3. ›Multimedia‹  
The medium last played is played back.  
4. ›C D‹  
Adjusting the volume  
Turn the volume button while giving an in‐  
struction until the desired volume is set.  
5. ›C D drive‹  
6. ›Track ...‹, e.g., CD track 4.  
The volume remains constant even if the  
volume of other audio sources is changed.  
The volume is stored for the remote con‐  
trol currently in use.  
25  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
At a glance  
Voice activation system  
Notes on Emergency  
Requests  
Do not use the voice activation system to ini‐  
tiate an Emergency Request. In stressful situa‐  
tions, the voice and vocal pitch can change.  
This can unnecessarily delay the establish‐  
ment of a telephone connection.  
Instead, use the SOS button, refer to  
page 220, in the vicinity of the interior mirror.  
Environmental conditions  
Say the commands, numbers, and letters  
smoothly and with normal volume, empha‐  
sis, and speed.  
Always say commands in the language of  
the voice activation system.  
Keep the doors, windows, and glass sun‐  
roof closed to prevent noise interference.  
Avoid making other noise in the vehicle  
while speaking.  
26  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
Integrated Owner's Manual in the vehicle  
At a glance  
Integrated Owner's Manual in the vehicle  
Select components  
Vehicle equipment  
All standard, country-specific and optional  
1.  
Press the button.  
equipment that is offered in the model series is  
described in this chapter. Therefore, equip‐  
ment is also described that is not available in a  
vehicle, e. g., because of the selected optional  
equipment or country variant. This also applies  
for safety-related functions and systems.  
2. Turn the controller: open "Vehicle Info".  
3. Press the controller.  
4. Selecting desired range:  
"Quick reference"  
"Search by pictures"  
"Owner's Manual"  
Integrated Owner's Manual  
in the vehicle  
The Integrated Owner's Manual can be dis‐  
played on the Control Display. The equipment  
and functions that are in the vehicle are descri‐  
bed therein.  
Components of the integrated  
Owner's Manual  
The integrated Owner's Manual consists of  
three parts, which offer various levels of infor‐  
mation or access possibilities.  
Leafing through the Owner's Manual  
Page by page with link access  
Turn the controller until the next or previous  
page is displayed.  
Quick Reference Guide  
Located in the Quick Reference is important  
information for the operation of the vehicle, the  
operation of basic vehicle functions or for what  
to do in the event of a flat tire. This information  
can also be displayed during driving.  
Page by page without link access  
Leaf through the pages directly while skipping  
the links.  
Highlight the symbol once. Now simply press  
the controller to leaf from page to page.  
Search by pictures  
Information and descriptions based on illustra‐  
tions can be searched via search by pictures.  
This is helpful, for example, if the description of  
an outfitting package that cannot be named is  
needed.  
Leaf back.  
Leaf forward.  
Owner's Manual  
Information and descriptions can be searched  
by direct entry of a search term via the index.  
27  
Online Edition for Part no. 01 40 2 911 066 - VI/13  
At a glance  
Integrated Owner's Manual in the vehicle  
Context help - Owner's Manual to the  
temporarily selected function  
The relevant information can be opened di‐  
rectly.  
Programmable memory buttons  
General information  
The Owner's Manual can be stored on the pro‐  
grammable memory buttons and called up di‐  
rectly.  
Opening via the iDrive  
To move directly from the application on the  
Control Display to the options menu:  
Storing  
1. "Owner's Manual" Select via the iDrive.  
1.  
Press the button or move the control‐  
ler to the right repeatedly until the  
"Options" menu is displayed.  
2.  
Press the desired button for more  
than 2 seconds.  
2. "Display Owner's Manual"  
Executing  
Press the button.  
Opening when a Check Control  
message is displayed  
The Owner's Manual is displayed im‐  
mediately.  
Directly from the Check Control message on  
the Control Display:  
"Display Owner's Manual"  
Changing between a function and the  
Owner's Manual  
To change from a function, e.g., radio, to the  
Owner's Manual on the Control Display and to  
switch between the two displays:  
1.  
Press the button or move the control‐  
ler to the right repeatedly until the  
"Options" menu is displayed.  
2. "Display Owner's Manual"  
3. Select the desired page in the Owner's  
Manual.  
4.  
5.  
Press the button again to return to  
the function displayed last.  
Press the button to return to the page  
of the Owner's Manual displayed last.  
To switch back and forth repeatedly between  
the function displayed last and the page of the  
Owner's Manual displayed last, repeat steps 4  
and 5. This opens a new panel every time.  
28  
Online Edition for Part no. 01 40 2 911 066 - VI/13