Mobility
Coolant
Coolant
Adding engine oil
1. Let the engine cool.
Vehicle equipment
All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equip‐
ment is also described that is not available in a
vehicle, e. g., because of the selected optional
equipment or country variant. This also applies
for safety-related functions and systems.
2. Turn the cap of the coolant reservoir
slightly counterclockwise to allow any ex‐
cess pressure to dissipate, and then open
it.
General information
Danger of burns from hot engine
Do not open the cooling system while
the engine is hot; otherwise, escaping coolant
may cause burns.◀
3. If the coolant is low, slowly add coolant up
to the specified level; do not overfill.
Suitable additives
4. Turn the cap until there is an audible click.
The arrows on the coolant reservoir and
the cap must point towards one another.
Only use suitable additives; otherwise,
engine damage may occur. The additives are
harmful to your health.◀
5. Have the cause of the coolant loss elimi‐
nated as soon as possible.
Coolant consists of water and additives.
Not all commercially available additives are
suitable for your vehicle. Ask your service cen‐
ter for suitable additives.
Disposal
Comply with the relevant environmen‐
tal protection regulations when dispos‐
ing of coolant and coolant additives.
Coolant level
Checking
Marks are provided on the side of the coolant
reservoir.
Symbol
Meaning
Maximum
Minimum
1. Let the engine cool.
2. The coolant level is correct when it is be‐
tween these two marks.
206
Online Edition for Part no. 01 40 2 911 066 - VI/13
