Get CONTROLS -> Sensors of the vehicle Guide for BMW 5 Series 4 Door 2022

Sensors of the vehicle

CONTROLS

Sensors of the vehicle

Vehicle features and

options

Cameras

Front camera

This chapter describes all standard, country-spe‐

cific and optional features offered with the series.

It also describes features and functions that are

not necessarily available in your vehicle, e.g., due

to the selected options or country versions. This

also applies to safety-related functions and sys‐

tems. When using these functions and systems,

the applicable laws and regulations must be ob‐

served.

Front camera

Overview

Cameras behind the windshield

Depending on the equipment, the following cam‐

eras and sensors are installed in the vehicle:

▷ Front camera.

▷ Cameras behind the windshield.

▷ Top view cameras.

▷ Rearview camera.

▷ Front radar sensor.

▷ Radar sensors, side, front.

▷ Radar sensors, side, rear.

▷ Ultrasound sensors in the front/rear bumpers.

▷ Ultrasonic sensors, side.

The cameras are located in the area of the inte‐

rior mirror.

Keep the vehicle cameras and sensors, as well

as surrounding areas, clean and unobstructed.

Online Edition for Part no. 01405A37F46 - VI/21

Sensors of the vehicle

CONTROLS

▷ Camera behind the windshield: if the camera

Top view cameras

has overheated and been temporarily

switched off due to excessively high temper‐

atures.

▷ Camera behind the windshield: during cali‐

bration of the camera immediately after vehi‐

cle delivery.

If applicable, a Check Control message will be

displayed when the system limits are reached.

One camera is located at the bottom of each ex‐

terior mirror housing.

Radar sensors

Front radar sensor

Rearview camera

The radar sensor is located in the front bumper.

The camera is located in the handle of the trunk

lid.

Radar sensors, side, front

System limits of the cameras

The cameras may not be fully functional and may

provide incorrect information in the following sit‐

uations:

▷ In heavy fog, wet conditions, or snowfall.

▷ On steep hills, in steep depressions or in tight

curves.

▷ When the camera field of view is covered, for

instance by a fogged up windshield or labels.

The radar sensors are located in the bumper.

▷ If the camera lens is dirty or damaged.

▷ With exterior mirrors folded in.

▷ When driving toward bright lights or strong

reflections, e.g., because of a setting sun.

▷ When it is dark outside.

Online Edition for Part no. 01405A37F46 - VI/21

Sensors of the vehicle

CONTROLS

Radar sensors, side, rear

Ultrasound sensors

Ultrasound sensors in the front/

rear bumpers

The ultrasound sensors of the

Park Distance Control PDC are lo‐

cated in the bumpers.

The radar sensors are located in the bumper.

Ultrasonic sensors, side

System limits of the radar

sensors

The radar sensors may not be fully functional or

may not be available in the following situations:

▷ If sensors are dirty, such as due to icing.

▷ If sensors are covered, such as by labels,

films or a number plate baseplate.

▷ If the sensor is not aligned correctly, for in‐

stance due to parking damage.

The ultrasound sensors of the Automatic Parking

Assistant are located on the side of the vehicle.

▷ If the radiation range of the sensors is cov‐

ered, e.g., by protruding cargo.

System limits of the ultrasonic

sensors

The detection of objects with ultrasonic meas‐

urements can run into physical limits, e.g., in the

following situations:

▷ When the field of view of the sensors is cov‐

ered, e.g., by garage walls, hedges, snow hills,

vehicles or trailers.

▷ After improper paint work on the vehicle in

the area of the sensors.

▷ In case of dirty sensors.

▷ On steep hilltops or in sharp dips in the road.

▷ In case of covered sensors, such as due to la‐

bels.

If applicable, a Check Control message will be

displayed when the system limits are reached.

▷ If the sensor is not aligned correctly, for in‐

stance due to parking damage.

▷ After improper paint work on the vehicle in

the area of the sensors.

▷ For small children and animals.

▷ For persons with certain clothing, for instance

jacket.

▷ In case of external interference of the ultra‐

sound, for instance from passing vehicles,

loud machines or other ultrasonic sources.

Online Edition for Part no. 01405A37F46 - VI/21

Sensors of the vehicle

CONTROLS

▷ Under certain weather conditions, e.g., high

relative atmospheric humidity, wet conditions,

snowfall, cold, extreme heat, or strong wind.

▷ With tow bars and trailer couplings of other

vehicles.

▷ With thin or wedge-shaped objects.

▷ With moving objects.

▷ With elevated, protruding objects such as

ledges.

▷ With objects with corners, edges, and

smooth surfaces.

▷ With objects with a fine surface structure

such as fences.

▷ For objects with porous surfaces.

▷ With small and low objects, for instance

boxes.

▷ With soft obstacles or obstacles covered in

foam material.

▷ With plants and bushes.

▷ In automatic car washes.

▷ On uneven surfaces, such as speed bumps.

▷ Due to heavy exhaust.

▷ Cargo that extends beyond the perimeter of

the vehicle is not taken into account by the

ultrasonic sensors.

If applicable, a Check Control message will be

displayed when the system limits are reached.

Online Edition for Part no. 01405A37F46 - VI/21

Operating state of the vehicle

CONTROLS

Operating state of the vehicle

Safety information

Vehicle features and

options

Warning

This chapter describes all standard, country-spe‐

cific and optional features offered with the series.

It also describes features and functions that are

not necessarily available in your vehicle, e.g., due

to the selected options or country versions. This

also applies to safety-related functions and sys‐

tems. When using these functions and systems,

the applicable laws and regulations must be ob‐

served.

An unsecured vehicle can begin to move and

possibly roll away. There is a risk of accident.

Before exiting, secure the vehicle against roll‐

ing.

In order to ensure that the vehicle is secured

against rolling away, follow the following:

▷ Set the parking brake.

▷ On uphill grades or on a downhill slope,

turn the front wheels in the direction of the

curb.

General information

▷ On uphill grades or on a downhill slope,

also secure the vehicle, for instance with a

wheel chock.

Depending on the situation, the vehicle is in one

of the three states:

▷ Idle state.

Warning

▷ Standby state.

▷ Drive-ready state.

Unattended children or animals in the vehicle

can cause the vehicle to move and endanger

themselves and traffic, for instance due to the

following actions:

Idle state

▷ Pressing the Start/Stop button.

▷ Releasing the parking brake.

Principle

When the vehicle is in idle state, it is switched

off.

▷ Opening and closing the doors or win‐

dows.

▷ Engaging selector lever position N.

▷ Using vehicle equipment.

General information

The vehicle is in idle state prior to opening from

the outside and after exiting and locking.

There is a risk of accidents or injuries. Do not

leave children or animals unattended in the ve‐

hicle. Take the vehicle key with you when exit‐

ing and lock the vehicle.

Automatic idle state

For instance, the idle state is automatically es‐

tablished under the following conditions:

Online Edition for Part no. 01405A37F46 - VI/21

CONTROLS -> Sensors of the vehicle for Your BMW 5 Series 4 Door 2022

Popular Manuals