Get CONTROLS -> Vehicle operating condition Guide for BMW X5 SUV 2024

Vehicle operating condition

CONTROLS

Vehicle operating condition

Observe the following to ensure that the vehi-

cle is secured against rolling away:

Vehicle equipment

▷

Apply the parking brake.

This chapter describes equipment, systems

and functions which are offered or may be of-

fered in future on a model-specific basis, even

if they are not included in the vehicle in ques-

tion.

Turn the front wheels towards the kerb

on uphill or downhill gradient.

▷

Additionally secure the vehicle on uphill

or downhill gradient, for example with a

chock.

For further information:

Vehicle equipment, see page 8.

WARNING

General

Unsupervised children or pets in the vehicle

can set the vehicle in motion and endanger

themselves or other road users, for example

by the following actions:

Depending on the situation, the vehicle is in

one of the three states:

▷

Rest state.

▷

Pressing the Start/Stop button.

Releasing the parking brake.

Standby state.

Drive-ready state.

Opening and closing doors or windows.

Engaging selector lever position N.

Operating vehicle equipment.

Rest state

There is a risk of accident or injury. Do not

leave children or pets unsupervised in the ve-

hicle. When leaving the vehicle, take the vehi-

cle key with you and lock the vehicle.

Principle

If the vehicle is in rest state, it is switched off.

General

Establishing the rest state

automatically

The rest state is established automatically, for

example in the following situations:

The vehicle is in rest state before you open it

from outside and once you have left the vehicle

and locked it.

Safety information

▷

After a few minutes, if no operation is per-

formed on the vehicle.

WARNING

When the vehicle battery state of charge is

low.

An unsecured vehicle can start moving and

roll away. There is a risk of accident. Before

leaving the vehicle, secure the vehicle against

rolling away.

Depending on the iDrive setting: one or

both of the front doors is opened when

leaving the vehicle after a journey.

Online Edition for Part no. 01405A7D5D0 - II/23

OwnersManuals2.com

Vehicle operating condition

CONTROLS

In some situations, for example during a tele-

phone call or when the low-beam headlight is

switched on, the vehicle will not switch auto-

matically to rest state.

Establishing rest state on opening

the front doors

After a trip, the rest state can be established

by opening the front doors. For this purpose,

all passengers must exit the vehicle.

Press the button on the luggage compartment

to access the vehicle in deep sleep mode.

Apps menu

2. "Vehicle apps"

Deactivating deep sleep mode

3. "Doors and windows"

4. "Lock/unlock"

▷

Switch off the function on the control dis-

play.

5. "Turn off after opening door"

▷

Drive the vehicle.

Establishing the rest state manually

To establish rest state in the vehicle at the end

of the journey:

Standby state

Principle

Press and hold the button on

the radio until the OFF display

on the instrument cluster turns

off.

When standby state is activated, most func-

tions can be operated while the vehicle is still

stationary. Any desired settings can be per-

formed.

General

Deep sleep mode

The vehicle switches to standby state after the

front doors are opened from the outside.

Principle

Use the deep sleep mode to prevent discharg-

ing of the vehicle battery if the vehicle is not

used for a period of several weeks.

Manually establishing standby state

General

In deep sleep mode, the vehicle functions are

reduced to the essentials.

The standby state can be switched on again

after the rest state has been automatically es-

tablished.

Activating deep sleep mode

Apps menu

With button on the radio

2. "Vehicle apps"

Press the button on the radio.

The control display and instru-

ment cluster illuminate.

3. "System settings"

4. "Deep sleep mode"

5. Select the desired setting.

OwnersManuals2.com

Online Edition for Part no. 01405A7D5D0 - II/23

Vehicle operating condition

CONTROLS

With the Start/Stop button

WARNING

Press the Start/Stop button. The

An unsecured vehicle can start moving and

roll away. There is a risk of accident. Before

leaving the vehicle, secure the vehicle against

rolling away.

control display and instrument

cluster illuminate.

Observe the following to ensure that the vehi-

cle is secured against rolling away:

Display in the instrument cluster

▷

Apply the parking brake.

OFF is shown in the instru-

ment cluster. The drivetrain is

switched off and standby state

switched on.

Turn the front wheels towards the kerb

on uphill or downhill gradient.

▷

Additionally secure the vehicle on uphill

or downhill gradient, for example with a

chock.

Drive-ready state

NOTICE

Principle

Repeated attempts to start the engine or

starting it several times in quick succession

can cause the starter to overheat. Fuel will

also be unburned or insufficiently burned,

which could cause the catalytic converter to

overheat. There is a risk of material damage.

Avoid repeated starting in quick succession.

Switching on drive-ready state corresponds to

starting the engine.

General

Some functions can only be operated when the

drive-ready state is switched on.

Safety information

Switching on drive-ready state

General

DANGER

Drive-ready state is switched on

using the Start/Stop button.

A blocked exhaust pipe or inadequate ven-

tilation can allow harmful exhaust fumes to

enter the vehicle. The exhaust fumes contain

pollutants which are colourless and odour-

less. In enclosed spaces, exhaust fumes can

also build up outside the vehicle. There is a

danger to life. Keep the exhaust pipe clear

and ensure sufficient ventilation.

Switching on drive-ready state

1. Press the brake.

2. Press the Start/Stop button.

Starting proceeds automatically for a short

time and stops as soon as the engine starts.

Most of the indicator and warning lights in

the instrument cluster illuminate for varying

lengths of time.

Online Edition for Part no. 01405A7D5D0 - II/23

OwnersManuals2.com

Vehicle operating condition

CONTROLS

Petrol engine

Depending on the motorisation, full drive

power may not be available until approx.

30 seconds after the engine is started. In this

case, the vehicle will not accelerate in the usual

way.

For further information:

Power display, see page 168.

Diesel engine

With the engine cold and at temperatures be-

low 0 ℃, 32 ℉ the starting operation can be

delayed slightly due to automatic preheating.

A Check Control message is shown.

After the engine is started, full drive power may

not be available until the engine is at operating

temperature. Pay attention to the engine tem-

perature display and power display as applica-

ble. In this case, the vehicle will not accelerate

in the usual way.

For further information:

▷

Engine temperature display, see page 169.

Power display, see page 168.

Display in the instrument cluster

The activated drive-ready state is indicated

in the instrument cluster, depending on the

equipment, by the display of information re-

quired for driving or the READY display.

Switching off drive-ready state

1. With the vehicle at a standstill, engage se-

lector lever position P.

2. Apply the parking brake.

3. Press the Start/Stop button.

The engine is switched off. The vehicle

changes to standby state.

OwnersManuals2.com

Online Edition for Part no. 01405A7D5D0 - II/23

CONTROLS -> Vehicle operating condition for Your BMW X5 SUV 2024

Popular Manuals