Instruments and Controls -> Information Displays for Your Chevrolet Silverado 1500 Light Truck 2023

Instruments and Controls  
127  
Fuel Range  
DIC Menu Items  
Door Ajar Light  
This display shows the approximate distance  
the vehicle can be driven without refueling.  
The fuel range estimate is based on an  
average of the vehicle's fuel economy over  
recent driving history and the amount of  
fuel remaining in the fuel tank. Fuel range  
cannot be reset.  
Turn the trip odometer reset stem to scroll  
through the following menu items:  
.
.
.
.
.
.
.
Digital Speedometer  
Trip 1/2  
Fuel Range  
Tire Pressure  
Remaining Oil Life  
Air Filter Life  
Brake Pad Life  
Base Level  
Uplevel  
Tire Pressure  
This light comes on when a door is open or  
not securely latched. Before driving, check  
that all doors are properly closed.  
Turn the trip odometer reset stem until a  
vehicle with the approximate pressures of all  
four tires displays. Tire pressure is displayed  
in either kilopascal (kPa) or in pounds per  
square inch (psi).  
Digital Speedometer  
The speedometer shows how fast the  
vehicle is moving in either kilometers per  
hour (km/h) or miles per hour (mph). The  
speedometer cannot be reset.  
Information Displays  
See Tire Pressure Monitor System 0 377 and  
Tire Pressure Monitor Operation 0 377.  
Driver Information Center (DIC)  
(Base Level)  
The DIC displays are shown in the center of  
the instrument cluster. The displays show  
the status of many vehicle systems. The trip  
odometer reset stem in the instrument  
cluster is used to access the DIC menu  
items.  
Trip 1 or 2 and Average Fuel Economy  
Remaining Oil Life  
Turn the trip odometer reset stem until TRIP  
1 or TRIP 2 displays. The current distance  
traveled, in either kilometers (km) or  
miles (mi), since the last reset for the trip  
odometer is shown, as well as the average  
fuel economy. The trip odometer and the  
average fuel economy can be reset by  
pressing and holding the trip odometer  
reset stem.  
Turn the trip odometer reset stem until  
REMAINING OIL LIFE displays. An estimate of  
the oil's remaining useful life is shown.  
REMAINING OIL LIFE 99% means 99% of the  
current oil life remains.  
When the remaining oil life is low, the  
CHANGE ENGINE OIL SOON message will  
appear on the display. The oil should be  
changed as soon as possible. See Engine Oil  
0 339. In addition to the engine oil life  
If the vehicle has a diesel engine, see the  
Duramax diesel supplement for more  
information.  
128  
Instruments and Controls  
system monitoring the oil life, additional  
maintenance is recommended. See  
Maintenance Schedule 0 417.  
The Air Filter Life display must be reset after  
the engine air filter replacement. To reset,  
see Engine Air Filter Life System 0 342.  
The Oil Life display must be reset after each  
oil change. It will not reset itself. Do not  
reset the Oil Life display at any time other  
than when the oil has just been changed.  
It cannot be reset accurately until the next  
oil change. To reset, see Engine Oil Life  
System 0 341.  
Brake Pad Life  
This displays an estimate of the remaining  
life of the front and rear brake pads.  
Messages will display based on brake pad  
wear and the state of the system. Reset the  
Brake Pad Life display after replacing the  
brake pads. See Brake Pad Life System  
0 350.  
Air Filter Life  
Turn the trip odometer reset stem until AIR  
FILTER LIFE displays. This displays an  
Driver Information Center (DIC)  
(Uplevel)  
The DIC displays are shown in the center of  
the instrument cluster in the Info app. See  
Instrument Cluster (Base Level) 0 107 or  
Instrument Cluster (Uplevel) 0 108. The  
displays show the status of many vehicle  
systems.  
o or p : Press to move left or right  
between the interactive display zones in the  
instrument cluster. Press the thumbwheel to  
select.  
estimate of the engine air filters remaining  
useful life and the state of the system.  
Engine Air Filter Life 95% means 95% of the  
current air filter life remains. Messages will  
display based on the engine air filter life  
and the state of the system.  
w or x : Use the thumbwheel to scroll up  
or down in a list. Press the thumbwheel to  
open a menu or select a menu item. Press  
and hold to reset values on certain screens.  
When the REPLACE AT NEXT OIL CHANGE  
message displays, the engine air filter  
should be replaced at the time of the next  
oil change. When the REPLACE SOON  
message displays, the engine air filter  
should be replaced at the earliest  
convenience.  
If the vehicle has a diesel engine, see the  
Duramax diesel supplement.  
Info Page Options  
The info pages on the DIC can be turned on  
or off through the Options menu.  
1. Press o or p to scroll to the Options  
application.  
2. Scroll w or x to choose Info pages and  
press the thumbwheel.  
Instruments and Controls  
129  
Average Fuel Economy that the vehicle has  
at that moment, and changes as driving  
conditions change.  
Press the thumbwheel while this display is  
active to reset the values.  
3. Scroll w or x to move through the list  
of possible information displays.  
Timer : To start the timer, press the  
thumbwheel while this display is active. The  
display will show the amount of time that  
has passed since the timer was last reset. To  
stop the timer, press the thumbwheel  
briefly while this display is active and the  
timer is running.  
4. Press the thumbwheel, while an item is  
highlighted, to select or deselect  
that item.  
The timer shows the time in the current  
drive cycle.  
All values in the Drive Summary are  
automatically reset each time the vehicle is  
started.  
The info pages can also be turned on or off  
through the DIC page Info Page Options.  
Info Pages  
Trip 1 or Trip 2, Average Fuel Economy, and  
Average Speed : Shows the current distance  
traveled, in either kilometers (km) or  
miles (mi), since the trip odometer was last  
reset.  
Press the thumbwheel while this display is  
active to reset the timer.  
The following is the list of all possible DIC  
info page displays. Some may not be  
available for your particular vehicle. Some  
items may not be turned on by default but  
can be turned on through the Options app.  
See Info Page Optionsearlier in this  
section.  
Tire Pressure : Shows the approximate  
pressures of all four tires. Tire pressure is  
displayed in either kilopascal (kPa) or in  
pounds per square inch (psi). If the pressure  
is low, the value for that tire is shown in  
amber. See Tire Pressure Monitor System  
0 377 and Tire Pressure Monitor Operation  
0 377.  
The Average Fuel Economy display shows  
the approximate average liters per  
100 kilometers (L/100 km), kilometers per  
liter (km/L), or miles per gallon (mpg). This  
number is calculated based on the value  
recorded since the last time this menu item  
was reset. This number reflects only the  
approximate average fuel economy that the  
vehicle has at that moment, and changes as  
driving conditions change.  
Speed : Shows the vehicle speed in either  
kilometers per hour (km/h) or miles per  
hour (mph).  
Fuel Economy : Displays average fuel  
economy, the best fuel economy over the  
selected distance, and a bar graph showing  
instantaneous fuel economy.  
Drive Summary : Displays the current  
distance traveled, in either kilometers (km)  
or miles (mi).  
It also includes the Average Fuel Economy.  
Average Fuel Economy shows the  
approximate average liters per  
100 kilometers (L/100 km), kilometers per  
liter (km/L), or miles per gallon (mpg). This  
number only reflects the approximate  
Average Speed shows the average speed of  
the vehicle in kilometers per hour (km/h) or  
miles per hour (mph). This average is  
calculated based on various vehicle speeds  
recorded since the last reset of this value.  
Press the thumbwheel to change the  
selected distance. This display can be reset  
by selecting Reset in the menu.  
130  
Instruments and Controls  
Driver Assistance : If equipped, shows  
information for Adaptive Cruise Control  
(ACC), Lane Keep Assist (LKA), Forward  
Collision Alert (FCA), and Follow Distance  
Indicator(FDI).  
the Brake Pad Life display after replacing the  
brake pads. See Brake Pad Life System  
0 350.  
Off Road : If equipped, displays vehicle pitch  
and roll information, road wheel angle, and  
four-wheel drive (4WD) status. If the vehicle  
has low traction, a low traction indicator  
and the wheels affected will display amber  
in the Off-Road page.  
Air Filter Life : Shows an estimate of the  
remaining engine air filters life and the  
state of the system. Engine Air Filter Life  
95% means 95% of the current air filter life  
remains. Messages will display based on the  
engine air filter life and the state of the  
system. When the REPLACE SOON message  
displays, the engine air filter should be  
replaced at the earliest convenience.  
Oil Life : Shows an estimate of the  
remaining oil life. If REMAINING OIL LIFE  
99% is displayed, that means 99% of the  
current oil life remains.  
Engine Hours (Hourmeter) : Shows the total  
number of hours the engine has run. This  
display also shows the engine idle hours.  
When the remaining oil life is low, the  
CHANGE ENGINE OIL SOON message will  
appear on the display. The oil should be  
changed as soon as possible. See Engine Oil  
0 339. In addition to the engine oil life  
system monitoring the oil life, additional  
maintenance is recommended. See  
Transmission Fluid Temperature : Shows the  
temperature of the automatic transmission  
fluid in either degrees Celsius (°C) or degrees  
Fahrenheit (°F).  
The Air Filter Life display must be reset after  
the engine air filter replacement. To reset,  
see Engine Air Filter Life System 0 342.  
Info Page Options : Scroll to choose which  
info pages appear on the DIC. Press the  
thumbwheel to select or deselect.  
Trailer Brake : On vehicles with the  
Integrated Trailer Brake Control (ITBC)  
system, the trailer brake display appears in  
the DIC.  
Maintenance Schedule 0 417.  
Blank Page : Shows no information.  
The Oil Life display must be reset after each  
oil change. It will not reset itself. Do not  
reset the Oil Life display at any time other  
than when the oil has just been changed.  
It cannot be reset accurately until the next  
oil change. To reset, see Engine Oil Life  
System 0 341.  
Head-Up Display (HUD)  
TRAILER GAIN shows the trailer gain setting.  
This setting can be adjusted from 0.0 to 10.0  
with either a trailer connected or  
disconnected.  
Warning  
{
If the HUD image is too bright or too  
high in your field of view, it may take  
you more time to see things you need to  
see when it is dark outside. Be sure to  
keep the HUD image dim and placed low  
in your field of view.  
OUTPUT shows the power output to the  
trailer any time a trailer with electric brakes  
is connected. Output is displayed as a bar  
graph. Dotted lines may appear in the  
OUTPUT display if a trailer is not connected.  
Brake Pad Life : Displays an estimate of the  
remaining life of the front and rear brake  
pads. Messages will display based on brake  
pad wear and the state of the system. Reset  
Instruments and Controls  
131  
If equipped with HUD, some information  
about the operation of the vehicle is  
projected onto the windshield. The image is  
projected through the HUD lens on top of  
the instrument panel. The information  
appears as an image focused out toward the  
front of the vehicle.  
Caution  
If you try to use the HUD image as a  
parking aid, you may misjudge the  
distance and damage your vehicle. Do not  
use the HUD image as a parking aid.  
The HUD control is to the left of the  
steering wheel.  
To adjust the HUD image:  
1. Adjust the driver seat.  
2. Start the engine.  
HUD Display on the Windshield  
Depending on how the vehicle is equipped,  
the HUD may display some of the following  
vehicle information and vehicle messages or  
alerts:  
The HUD information can be displayed in  
various languages. The speedometer reading  
and other numerical values can be displayed  
in either English or metric units.  
3. Use the following settings to adjust  
the HUD.  
$ : Press or pull to center the HUD image.  
The HUD image can only be adjusted up and  
down, not side to side.  
.
.
.
.
.
.
Speed  
Audio  
Phone  
Navigation  
Driver Assistance Features  
Vehicle Messages  
The language selection is changed through  
the radio, and the units of measurement are  
changed through the instrument cluster. See  
Settings (Base Radio) 0 175 or  
Settings (Uplevel Radio) 0 177 and Options”  
under Instrument Cluster (Base Level) 0 107  
or Instrument Cluster (Uplevel) 0 108.  
! : Press to select the display view. Each  
press will change the display view.  
D : Pull and hold to brighten the display.  
Press and hold to dim the display. Continue  
to hold to turn the display off.  
Some vehicle messages or alerts displayed in  
the HUD may be cleared by using the  
steering wheel controls.  
132  
Instruments and Controls  
The HUD image will automatically dim and  
brighten to compensate for outside lighting.  
HUD Views  
There are four views in the HUD. Some  
vehicle information and vehicle messages or  
alerts may be displayed in any view.  
Use D to adjust as needed.  
The HUD image can temporarily light up  
depending on the angle and position of  
sunlight on the HUD display. This is normal.  
Polarized sunglasses could make the HUD  
image harder to see.  
English Active Safety View Shown, Metric  
Similar  
Head-Up Display (HUD) Rotation Option  
If equipped, this feature under the Options  
menu of the instrument cluster allows for  
adjusting the angle of the HUD image and  
changing or turning off the Speed  
Limit Sign.  
Active Safety View : This displays the speed  
view along with a driver assistance graphic  
on the left. Driver assistance graphics show  
your vehicle, vehicle ahead, gap setting, and  
lane status information. In addition to driver  
assistance graphics, pedestrian advisory and  
trailer sway indicators will be displayed.  
English Speed View Shown, Metric Similar  
Speed View : This displays the speedometer  
reading in English or metric units, and speed  
limit. Some information only appears on  
vehicles that have these features, and when  
they are active.  
HUD Rotation: Press the thumbwheel while  
Adjust Rotation is highlighted to enter  
Adjust Mode. Scroll to adjust the angle of  
the HUD display. Press the thumbwheel to  
confirm and save the setting. This feature  
may only be available in P (Park).  
Speed Limit Style Adjustment  
If equipped, the speed limit style can be  
changed to a speed limit bar or speed limit  
sign from the Options menu in the  
instrument cluster. Press the thumbwheel  
while Speed Limit Style is highlighted to  
change the speed sign style or to turn it off.  
English Turn-by-Turn Shown, Metric Similar  
Instruments and Controls  
133  
English Compass Shown, Metric Similar  
English Off Road View Shown, Metric Similar  
English Audio Overlay Shown, Metric Similar  
Navigation/Active OnStar View : This  
displays the speed view along with  
Off Road View : This displays the speed  
view along with indicators for vehicle ahead,  
Lane Departure Warning/Lane Keep Assist,  
trailer sway, four-wheel drive status, and  
pedestrian advisory. Off-road information  
such as pitch angle, steering angle, and  
rolling angle is also shown.  
indicators for vehicle ahead, Lane Departure  
Warning/Lane Keep Assist, trailer sway, and  
pedestrian advisory. Turn-by-Turn navigation  
information is shown during active route.  
The compass heading is displayed when  
navigation routing is not active.  
Temporary Overlays  
Navigation Turn-by-Turn Alerts shown in the  
instrument cluster may also be displayed in  
any HUD view.  
Infotainment: Audio, and Phone, are  
temporary overlays linked to cluster layouts.  
English Phone Overlay Shown, Metric Similar  
Audio/Phone Overlay : This displays digital  
speed, indicators from speed view along  
with audio/phone information, vehicle ahead  
indicator, Lane Departure Warning/Lane  
Keep Assist, Adaptive Cruise Control, and set  
speed. The current radio station, media type,  
and incoming calls will also be displayed.  
134  
Instruments and Controls  
.
.
.
.
.
.
.
.
.
.
.
.
Steering  
Audio overlays display when the audio app  
is selected on the instrument cluster. All  
HUD views may briefly display audio  
information when the driver uses the  
steering wheel controls to adjust the audio  
settings appearing in the instrument cluster.  
The windshield is part of the HUD system.  
See Windshield Replacement 0 356.  
Ride Control Systems  
Driver Assistance Systems  
Cruise Control  
Lighting and Bulb Replacement  
Wiper/Washer Systems  
Doors and Windows  
Seat Belts  
Airbag Systems  
Engine and Transmission  
Tire Pressure  
Vehicle Messages  
Messages displayed on the Driver  
Information Center (DIC) indicate the status  
of the vehicle or some action that may be  
needed to correct a condition. Multiple  
messages may appear one after another.  
Incoming phone calls appearing in the  
instrument cluster, may also display in any  
HUD view.  
Care of the HUD  
The messages that do not require  
immediate action can be acknowledged and  
cleared by pressing the thumbwheel. The  
messages that require immediate action  
cannot be cleared until that action is  
performed.  
Clean the inside of the windshield to remove  
any dirt or film that could reduce the  
sharpness or clarity of the HUD image.  
Battery  
Engine Power Messages  
Clean the HUD lens with a soft cloth  
sprayed with glass cleaner. Wipe the lens  
gently, then dry it.  
REDUCED ACCELERATION DRIVE  
WITH CARE  
All messages should be taken seriously;  
clearing the message does not correct the  
problem.  
HUD Troubleshooting  
This message displays when the vehicle's  
propulsion power is reduced. A reduction in  
propulsion power can affect the vehicle's  
ability to accelerate. If this message is on,  
but there is no observed reduction in  
performance, proceed to your destination.  
Under certain conditions the performance  
may be reduced the next time the vehicle is  
driven. The vehicle may be driven while this  
message is on, but maximum acceleration  
and speed may be reduced. Anytime this  
Check that:  
If a SERVICE message appears, see your  
dealer.  
.
Nothing is covering the HUD lens.  
.
The HUD brightness setting is not too  
dim or too bright.  
Follow the instructions given in the  
messages. The system displays messages  
regarding the following topics:  
.
.
.
The HUD is adjusted to the proper height.  
Polarized sunglasses are not worn.  
The windshield and HUD lens are clean.  
.
Service Messages  
.
Fluid Levels  
.
.
Vehicle Security  
Brakes  
If the HUD image is not correct, contact  
your dealer.