Keys, Doors, and Windows -> Keys and Locks for Your Chevrolet Silverado 1500 Light Truck 2023

12  
Keys, Doors, and Windows  
If the vehicle has the Keyless Access system,  
the remote key has a button on the side of  
the remote key used to remove the key.  
With an active OnStar or connected service  
plan, an OnStar Advisor may remotely  
unlock the vehicle. See OnStar Overview  
0 441.  
Remote Key Operation  
The Keyless Access system allows for vehicle  
entry when the remote key is within 1 m  
(3 ft). See Keyless Access Operationlater  
in this section.  
This key is used for the driver door and  
glove box.  
If locked out of the vehicle, see Roadside  
Assistance Program 0 433.  
The remote key functions may work up to  
60 m (197 ft) away from the vehicle.  
If equipped with memory seats, remote keys  
1 and 2 are linked to seating positions of  
memory 1 or 2. See Memory Seats 0 47.  
Other conditions can affect the performance  
of the remote key. See Remote Key 0 12.  
Remote Key  
See Radio Frequency Statement 0 438.  
The key that is part of the remote key can  
be used for all locks.  
If there is a decrease in the remote key  
operating range:  
.
.
.
Check the distance. The remote key may  
be too far from the vehicle.  
Check the location. Other vehicles or  
objects may be blocking the signal.  
Check the remote key's battery. See  
Battery Replacementlater in this  
section.  
If the remote key is still not working  
correctly, see your dealer or a qualified  
technician for service.  
Press the button to remove the key. Never  
pull the key out without pressing the  
button.  
See your dealer if a replacement key or  
additional key is needed.  
.
If it becomes difficult to turn a key, inspect  
the key blade for debris. Periodically clean  
with a brush or pick.  
Remove the key by pressing the button on  
the side of the remote key near the bottom  
and pull the key out. Never pull the key out  
without pressing the button.  
Keys, Doors, and Windows  
13  
See your dealer if a new remote key is  
needed.  
settings from the infotainment screen, touch  
Settings > Vehicle > Remote Lock, Unlock,  
Start.  
If enabled, the turn signal lamps flash twice  
to indicate unlocking has occurred.  
If enabled, the exterior lamps may turn on.  
To view available settings from the  
infotainment screen, touch Settings >  
Vehicle > Remote Lock, Unlock, Start.  
If the driver door is open when Q is  
pressed, all doors will lock and then the  
driver door will immediately unlock,  
if enabled. To view available settings from  
the infotainment screen, touch Settings >  
Vehicle > Remote Lock, Unlock, Start.  
Pressing K on the remote key disarms the  
alarm system. See Vehicle Alarm System  
0 29.  
If equipped with remote mirror folding,  
If the passenger door is open when Q is  
double pressing and holding K for  
one second will unfold the mirrors,  
if enabled. To view available settings from  
the infotainment screen, touch Settings >  
Vehicle > Comfort and Convenience.  
pressed, all doors lock.  
Pressing Q arms the alarm system. See  
Vehicle Alarm System 0 29.  
S : Press and release Q, then immediately  
If equipped with remote mirror folding,  
press and hold S until the turn signal  
lamps flash or for at least four seconds. The  
engine may be started from outside the  
vehicle using the remote key. See Remote  
Vehicle Start 0 18.  
double pressing and holding Q for  
one second will fold the mirrors, if enabled.  
To view available settings from the  
infotainment screen, touch Settings >  
Vehicle > Comfort and Convenience.  
Double press and hold K until the windows  
fully open, if remote window operation is  
enabled. To view available settings from the  
infotainment screen, touch Settings >  
Vehicle > Remote Lock, Unlock, Start.  
Q : Press to lock all doors and the tailgate,  
K : Press once to unlock only the driver  
x : Press twice quickly to release the  
if equipped.  
door. If K is pressed again within  
three seconds, all remaining doors and the  
tailgate unlock. The interior lamps may  
come on and stay on for 20 seconds or until  
the ignition is turned on.  
tailgate, if equipped.  
If enabled, the turn signal lamps flash and/  
or the horn may sound on the second press  
to indicate locking has occurred. If enabled,  
the horn chirps when Q is pressed again  
within three seconds. To view available  
7 : Press and release to initiate vehicle  
locator. The turn signal lamps flash and the  
horn sounds three times.  
14  
Keys, Doors, and Windows  
.
.
Two lock/unlock button presses were  
used to unlock all doors.  
Any vehicle door has been opened and all  
doors are now closed.  
Keyless Unlocking/Locking from the  
Driver Door  
Press and hold 7 for more than  
three seconds to activate the panic alarm.  
The turn signal lamps flash and the horn  
sounds repeatedly for 30 seconds. The alarm  
turns off when the ignition is turned on or  
7 is pressed again. The ignition must be off  
for the panic alarm to work.  
When the doors are locked and the remote  
key is within 1 m (3 ft) of the door handle,  
pressing the lock/unlock button on the  
driver door handle will unlock the driver  
door. If the lock/unlock button is pressed  
again within five seconds, all passenger  
doors and the tailgate will unlock.  
Keyless Unlocking/Locking from the  
Passenger Doors  
When the doors are locked and the remote  
key is within 1 m (3 ft) of the door handle,  
pressing the lock/unlock button on a  
passenger door handle, if equipped, will  
unlock all doors. Pressing the lock/unlock  
button will cause all doors to lock if any of  
the following occur:  
Keyless Access Operation  
The Keyless Access system allows for doors  
and the tailgate to be accessed without  
pressing the remote key button. The remote  
key must be within 1 m (3 ft) of the tailgate  
or door being opened. If the vehicle has this  
feature, there will be a button on the  
outside door handles.  
.
The lock/unlock button was used to  
unlock all doors.  
.
Any vehicle door has been opened and all  
doors are now closed.  
Keyless Access can be programmed to  
unlock all doors on the first lock/unlock  
press from the driver door. Keyless  
Unlocking can also be turned off. To view  
available settings from the infotainment  
screen, touch Settings > Vehicle > Remote  
Lock, Unlock, Start.  
Disable/Enable Keyless Unlocking of Exterior  
Door Handles and Tailgate  
If equipped, keyless unlocking of the exterior  
door handles and tailgate can be disabled  
and enabled.  
Driver Side Shown, Passenger Side Similar  
Pressing the lock/unlock button will cause  
all doors to lock if any of the following  
occur:  
It has been more than five seconds since  
the first lock/unlock button press.  
If equipped with memory seats, remote keys  
1 and 2 are linked to seating positions of  
memory 1 or 2. See Memory Seats 0 47.  
Disabling Keyless Unlocking:  
With the vehicle off, press and hold Q and  
.
K on the remote key at the same time for  
approximately three seconds. The turn signal  
lamps will flash four times quickly to  
Keys, Doors, and Windows  
15  
indicate access is disabled. Using any  
exterior handle to unlock the doors or open  
the tailgate will cause the turn signal lamps  
to flash four times quickly, indicating access  
is disabled. If disabled, disarm the alarm  
system before starting the vehicle.  
To view available settings from the  
infotainment screen, touch Settings >  
Vehicle > Remote Lock, Unlock, Start.  
vehicle is driven. To view available settings  
from the infotainment screen, touch Settings  
> Vehicle > Remote Lock, Unlock, Start.  
Temporary Disable of Passive Locking  
Key Access  
Temporarily disable passive locking by  
To access a vehicle with a dead remote key  
battery, see Door Locks 0 19.  
pressing and holding K on the interior door  
switch with a door open for at least  
four seconds, or until three chimes are  
heard. Passive locking will then remain  
disabled until Q on the interior door is  
pressed, or until the vehicle is turned on.  
Enabling Keyless Unlocking:  
Programming Remote Keys to the  
Vehicle  
With the vehicle off, press and hold Q and  
K on the remote key at the same time for  
approximately three seconds. The turn signal  
lamps will flash twice quickly to indicate  
access is enabled.  
Only remote keys programmed to the  
vehicle will work. If a remote key is lost or  
stolen, a replacement can be purchased and  
programmed through your dealer. The  
vehicle can be reprogrammed so that lost or  
stolen remote keys no longer work. Each  
vehicle can have up to eight remote keys  
matched to it.  
Remote Left in Vehicle Alert  
Passive Locking  
When the vehicle is turned off and an  
remote key is left in the vehicle, the horn  
will chirp three times after all doors are  
closed. To view available settings from the  
infotainment screen, touch Settings >  
Vehicle > Remote Lock, Unlock, Start.  
This feature will lock the vehicle several  
seconds after all doors are closed, if the  
vehicle is off and at least one remote key  
has been removed from the interior, or none  
remain in the interior.  
Starting the Vehicle with a Low Remote  
Key Battery  
Remote No Longer in Vehicle Alert  
If other electronic devices interfere with the  
remote key signal, the vehicle may not  
detect the remote key inside the vehicle.  
If passive locking is enabled, the doors may  
lock with the remote key inside the vehicle.  
Do not leave the remote key in an  
unattended vehicle.  
If the remote key battery is weak or if there  
is interference with the signal, the DIC may  
display NO KEY FOUND, REPLACE BATTERY IN  
KEY or NO REMOTE KEY WAS DETECTED  
PLACE KEY IN KEY POCKET THEN START YOUR  
VEHICLE when starting the vehicle.  
If the vehicle is on with a door open and  
then all doors are closed, the vehicle will  
check for remote keys inside. If an remote  
key is not detected, the Driver Information  
Center (DIC) will display NO REMOTE  
DETECTED and the horn will chirp three  
times. This occurs only once each time the  
16  
Keys, Doors, and Windows  
To start the vehicle:  
1. Place the remote key in the remote key  
pocket/insert.  
Caution  
When replacing the battery, do not touch  
any of the circuitry on the remote key.  
Static from your body could damage the  
remote key.  
2. With the vehicle in P (Park) or N (Neutral)  
press the brake pedal and ENGINE  
START/STOP.  
Replace the remote key battery as soon  
as possible.  
Caution  
Battery Replacement  
Always replace the battery with the  
correct type. Replacing the battery with  
an incorrect type could potentially create  
a risk of battery explosion. Dispose of  
used batteries according to instructions  
and local laws. Do not attempt to burn,  
crush, or cut the used battery, and avoid  
exposing the battery to environments  
with extremely low air pressures or high  
temperatures.  
Warning  
{
Never allow children to play with the  
remote key. The remote key contains a  
small battery, which can be a choking  
hazard. If swallowed, internal burns can  
occur, resulting in severe injury or death.  
Seek medical attention immediately if a  
battery is swallowed.  
Remote Key Pocket without Bucket Seats  
(Lower Compartment)  
Warning  
{
Caution  
To avoid personal injury, do not touch  
metal surfaces on the remote key when  
it has been exposed to extreme heat.  
These surfaces can be hot to the touch at  
temperatures above 59 °C (138 °F).  
If the remote key is not reassembled  
properly, liquids could enter the housing  
and damage the circuitry, resulting in a  
remote key malfunction and/or failure. To  
prevent damage, always follow the steps  
for remote key reassembly in this manual  
(Continued)  
Remote Key Pocket with Bucket Seats  
Keys, Doors, and Windows  
17  
Caution (Continued)  
to ensure the remote key is sealed  
properly whenever the remote key is  
opened.  
Replace the battery in the remote key soon  
if the DIC displays REPLACE BATTERY IN  
REMOTE KEY.  
To replace the battery:  
1. Press the button on the side of the  
remote key near the bottom and pull the  
mechanical key out. Never pull the  
mechanical key out without pressing the  
button.  
2. Use the mechanical key blade in the slot  
to remove the battery cover by hand.  
3. Remove the battery cover.  
18  
Keys, Doors, and Windows  
4. Pull the seal by pulling on the tab to  
access the battery.  
Laws in some communities may restrict the  
use of remote starters. Check local  
regulations for any requirements on remote  
starting of vehicles.  
Starting the Engine Using Remote Start  
Press S twice on the remote key. The turn  
signal lamps will flash. The lamps flash to  
confirm the request to remote start the  
vehicle has been received. During the  
remote start the parking lamps will remain  
on as long as the engine is running.  
5. Remove the old battery. Do not use a  
metal object.  
Do not use remote start if the vehicle is low  
on fuel. The vehicle may run out of fuel.  
6. Insert the new battery, positive side  
facing up. Replace with a CR2450 or  
equivalent battery.  
The vehicle cannot be remote started if:  
7. Place the seal back into the groove  
around the battery compartment.  
.
The remote key is inside the vehicle or if  
the key is in the ignition.  
The hood is not closed.  
There is an emission control system  
malfunction and the lamp is on.  
The engine will shut off after 15 minutes or  
after the remainder of the 30 minute total  
running time is used, unless you stop the  
remote start before engine running has  
completed or the vehicle is turned on.  
8. Replace the battery cover by snapping it  
back into the remote key.  
.
.
9. Reinsert the mechanical key.  
Press the brake pedal and turn the ignition  
on to drive the vehicle.  
.
The ignition is in any mode other  
than off.  
Remote Vehicle Start  
If equipped with the remote start feature,  
the climate control system will come on  
when the vehicle is started remotely,  
depending on the outside temperature.  
.
.
The hazard warning flashers are on.  
The 30 minutes of engine run time have  
been used.  
Total Engine Run Time  
Remote start can be used for up to  
30 minutes of total engine run time.  
.
The vehicle is not in P (Park).  
After two remote starts of 15 minutes,  
or multiple shorter time starts totaling  
30 minutes have been used, the vehicle  
must be started and then turned off before  
the remote start can be used again.  
The rear defog and heated and ventilated  
seats, if equipped, may also come on. See  
Heated and Ventilated Front Seats 0 49. To  
view available settings from the  
infotainment screen, touch Settings >  
Vehicle > Comfort and Convenience.  
The engine will turn off during a remote  
vehicle start if:  
.
The coolant temperature gets too high.  
The oil pressure gets low.  
.
Canceling a Remote Start  
The remote key range may be reduced  
while the vehicle is running.  
If equipped, the automatic heated steering  
wheel may also come on. See Heated  
Steering Wheel 0 100.  
To cancel a remote start, do one of the  
following:  
Other conditions can affect the performance  
of the remote key. See Remote Key 0 12.  
.
Press S. The parking lamps will turn off.  
Keys, Doors, and Windows  
19  
.
.
Turn on the hazard warning flashers.  
Turn the ignition on and then off.  
There are several ways to lock and unlock  
the vehicle.  
If equipped, the remote key must be within  
1 m (3 ft) of the tailgate or door being  
opened or locked. Press the button on the  
door handle to open. See Keyless Access  
Operationin Remote Key Operation 0 12.  
From outside:  
Door Locks  
.
.
.
Use the remote key.  
Use Keyless Access, if equipped.  
Use the key in the driver door or the  
passenger door, if equipped.  
Warning  
{
Free-Turning Locks  
Unlocked doors can be dangerous.  
The door key lock cylinder turns freely when  
either the wrong key is used, or the correct  
key is not fully inserted. The free-turning  
door lock feature prevents the lock cylinder  
from being forced open. To reset the lock  
cylinder, ensure the correct key is fully  
inserted into the lock cylinder. Rotate the  
key until you feel the lock cylinder click  
back into place. Remove the key and  
reinsert fully, rotate the key to unlock the  
vehicle.  
.
Passengers, especially children, can  
From inside, pull the door handle once to  
unlock the door. Pull the handle again to  
open the door.  
easily open the doors and fall out of a  
moving vehicle. The doors can be  
unlocked and opened while the vehicle  
is moving. The chance of being thrown  
out of the vehicle in a crash is  
increased if the doors are not locked.  
So, all passengers should wear seat  
belts properly and the doors should be  
locked whenever the vehicle is driven.  
See Vehicle Alarm System 0 29.  
Keyless Access  
.
.
Young children who get into unlocked  
vehicles may be unable to get out.  
A child can be overcome by extreme  
heat and can suffer permanent injuries  
or even death from heat stroke.  
Always lock the vehicle whenever  
leaving it.  
Outsiders can easily enter through an  
unlocked door when you slow down  
or stop the vehicle. Locking the doors  
can help prevent this from happening.  
20  
Keys, Doors, and Windows  
The doors will lock automatically  
five seconds after all doors are closed. If a  
door is reopened before that time, the  
five-second timer will reset when all doors  
are closed again.  
Automatic door locking cannot be disabled.  
Automatic door unlocking can be  
programmed. To view available settings  
from the infotainment screen, touch Settings  
> Vehicle > Power Door Locks.  
Power Door Locks  
Press Q on the door lock switch again or  
press Q on the remote key to lock the  
doors immediately.  
Lockout Protection  
If the ignition is on or in accessory mode  
and the power door lock switch is pressed  
with the driver door open, all the doors will  
lock and only the driver door will unlock.  
This feature can be programmed. To view  
available settings from the infotainment  
screen, touch Settings > Vehicle > Power  
Door Locks.  
If the vehicle is off and locking is requested  
while a door is open, when all doors are  
closed the vehicle will check to the Keyless  
Access function (if equipped). If an remote  
key is detected and the number of remote  
keys inside has not reduced, the driver door  
will unlock and the horn will chirp three  
times.  
Automatic Door Locks  
The doors will lock automatically when all  
doors are closed, the ignition is on, and the  
vehicle is shifted out of P (Park).  
Q : Press to lock the doors.  
K : Press to unlock the doors.  
Delayed Locking  
This feature delays the locking of the doors  
until five seconds after all doors are closed.  
If a vehicle door is unlocked, and then  
opened and closed, the doors will lock either  
when your foot is removed from the brake  
or the vehicle speed becomes faster than  
13 km/h (8 mph).  
Lockout Protection can be manually  
overridden with the driver door open by  
pressing and holding Q on the power door  
lock switch.  
When Q is pressed on the power door lock  
switch while the door is open, a chime will  
sound three times indicating delayed locking  
is active.  
To unlock the doors:  
Safety Locks  
The rear door safety locks prevent  
passengers from opening the rear doors  
from inside the vehicle.  
.
.
Press K on the power door lock switch.  
Shift the transmission into P (Park).  
Keys, Doors, and Windows  
21  
When the safety lock is enabled, adults and  
older children will not be able to open the  
rear door from the inside. Cancel the safety  
locks to enable the doors to open from the  
inside.  
Use the key to unlock the tailgate.  
Open the tailgate by lifting up on its handle  
while pulling the tailgate down.  
To shut the tailgate, firmly push it upward  
until it latches.  
To cancel the safety lock:  
After closing the tailgate, pull it back to be  
sure it is latched securely.  
1. Unlock the door and open it from the  
outside.  
Some tailgates have an electric latch. If the  
battery is disconnected or has low voltage,  
the tailgate will not open. The tailgate will  
resume operation when the battery is  
reconnected or recharged.  
2. Move the lever up to unlock. Do the  
same for the other door.  
Doors  
The safety lock is on the inside edge of the  
rear doors. To use the safety lock:  
Tailgate  
Power Release Tailgate  
1. Move the lever down to the lock  
position.  
Manual Tailgate  
Warning  
{
2. Close the door.  
Make sure there is no one in the way of  
the power tailgate as it is opening and  
closing, and keep hands away from the  
tailgate hinges when in use. You or  
others could be injured if caught in the  
path of the power tailgate or tailgate  
hinges.  
Warning  
{
3. Do the same for the other rear door.  
It is extremely dangerous to ride on the  
tailgate, even when the vehicle is  
To open a rear door when the safety lock  
is on:  
operated at low speeds. People riding on  
the tailgate can easily lose their balance  
and fall in response to vehicle maneuvers.  
Falling from a moving vehicle may result  
in serious injuries or death. Do not allow  
people to ride on the tailgate. Be sure  
everyone in your vehicle is in a seat and  
using a seat belt properly.  
1. Unlock the door by activating the inside  
handle, by pressing the power door  
unlock switch, or by using the  
remote key.  
2. Open the door from the outside.