Driving -> ISOFIX mountings and child seats for Your Citroen C5 Aircross SUV 2020

Safety  
ISOFIX child seats are fitted with two latches  
which are secured on the two rings A.  
Some seats also have an upper strap which is  
attached to ring B.  
"ISOFIX" mountings  
The seats, shown below, are fitted with ISOFIX  
compliant mountings:  
To secure the child seat to the TOP TETHER:  
F remove and stow the head restraint before  
installing the child seat on the seat (refit it  
once the child seat has been removed),  
F pass the strap of the child seat behind  
the seat backrest, centring it between the  
apertures for the head restraint rods,  
F secure the upper strap hook to ring B,  
F tighten the upper strap.  
Front seat  
The mountings comprise three rings for each  
seat:  
5
When fitting an ISOFIX child seat to the  
left-hand rear seat of the bench seat,  
before fitting the seat, first move the  
centre rear seat belt towards the middle  
of the vehicle, so as to avoid the seat  
interfering with the operation of the seat  
belt.  
Rear seats  
one ring B, located behind the seat and  
-
indicated by a marking, referred to as the  
TOP TETHER for fixing the upper strap.  
This system prevents the child seat from tipping  
forward in the event of a front impact.  
This ISOFIX mounting system ensures fast,  
reliable and safe fitting of the child seat in your  
vehicle.  
-
two rings A, located between the vehicle  
seat backrest and cushion, indicated by  
a marking,  
111  
Safety  
An incorrectly installed child seat  
"RÖMER Baby-Safe Plus and its ISOFIX  
"RÖMER Duo Plus ISOFIX"  
(size category: B1)  
compromises the child's safety in the  
event of an accident.  
base"  
(size category: E)  
Strictly observe the fitting instructions  
provided in the user guide supplied with  
the child seat.  
Group 1: from 9 to 18 kg  
Group 0+: from birth to 13 kg  
For information about the installation  
possibilities for ISOFIX child seats in your  
vehicle, refer to the summary table.  
Installed only in the "forward facing" position.  
Is attached to rings A and ring B, referred to  
as TOP TETHER, using an upper strap.  
Is only installed on the front passenger seat  
or on the outer rear seats. The head restraint  
on the outer rear seat must be fully raised.  
Three shell angles: sitting, reclining,  
lying down.  
This child seat can also be used on seats  
not equipped with ISOFIX mountings. In this  
case, it must be secured to the vehicle seat  
using the three-point seat belt. Adjust the  
front seat of the vehicle so that the child's feet  
do not touch the backrest.  
Installed "rearward facing" using an ISOFIX  
base which is attached to rings A.  
Is only installed on the front passenger seat  
or on the outer rear seats.  
The base has a support leg, height-  
adjustable, which rests on the vehicle's floor.  
This child seat can also be secured with  
a seat belt. In this case, only the shell is used  
and attached to the vehicle seat using the  
three-point seat belt.  
Recommended ISOFIX  
child seats  
Also consult the user guide from the child  
seat's manufacturer to find out how to  
install and remove the seat.  
112  
Safety  
Summary table of locations for ISOFIX child seats  
In line with European regulations, this table indicates the options for installing ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings.  
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child  
seat next to the i-Size logo.  
Weight of the child/indicative age  
Under 10 kg  
Under 10 kg  
(group 0)  
Under 13 kg  
From 9 to 18 kg  
(group 1)  
From about 1 to 3 years old  
(group 0)  
Up to about  
6 months old  
(group 0+)  
Up to about 1 year old  
Type of ISOFIX child seat  
ISOFIX size category  
Carrycot  
"Rearward facing"  
"Rearward facing"  
"Forward facing"  
5
F
G
C
D
E
C
D
A
B
B1  
Front passenger  
Seat position  
airbag  
Deactivated "OFF"  
X
X
IL  
X
IL  
X
IUF/IL  
IUF/IL  
Passenger  
seat (b)  
Row 1 (a)  
Activated "ON"  
Outer rear  
seats (c)  
X
X
IL  
X
IL  
IUF/IL  
Row 2  
Centre rear  
seat  
Not ISOFIX  
113  
Safety  
IUF Seat suitable for installing an Isofix  
Universal seat, "Forward facing", secured  
using the upper strap.  
Locations for i-Size child seats  
i-Size child seats have two latches that engage on the two rings A.  
i-Size child seats also have:  
IL Seat suitable for installing an Isofix Semi-  
Universal seat which is either:  
-
-
either an upper strap that is attached to ring B,  
or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position,  
-
-
-
"rearward facing" fitted with an upper  
strap or a support leg,  
"forward facing" fitted with a support  
leg,  
a carrycot fitted with an upper strap or  
a support leg.  
the role of which is to prevent the child seat from tipping forward in the event of a collision.  
For more information on ISOFIX mountings, refer to the corresponding section.  
In accordance with the new European regulations, this table indicates the options for installing  
i-Size child seats on seats in the vehicle fitted with ISOFIX mountings approved for i-Size.  
For securing the upper strap using the ISOFIX  
mountings, refer to the corresponding section.  
X
Seat not suitable for installing an ISOFIX  
seat or carrycot of the weight group  
indicated.  
Front passenger  
airbag  
i-Size restraint  
system  
Seat position  
(a) Refer to the current legislation in your  
country before installing a child at this  
seat position.  
Deactivated "OFF"  
Activated "ON"  
i-U  
Passenger seat  
Row 1 (a)  
Row 2 (c)  
(b)  
(b) Tilt the seat backrest to 45°, then install  
the child seat.  
i-UF  
Straighten the backrest until it contacts  
the child seat's backrest.  
Outer rear seats  
Centre rear seat  
i-U  
(c) To install a child seat on a rear seat,  
"rearward facing" or "forward facing",  
adjust the rear seat to the fully back  
position with the backrest tilted.  
Not i-Size  
i-U Suitable for i-Size restraint systems in the  
"Universal" category, "forward facing" and  
"rearward facing".  
i-UF Only suitable for i-Size restraint systems  
in the "Universal" category which are  
"forward facing".  
114