Ease of use and comfort -> Boot fittings for Your Citroen C5 Aircross SUV 2020

Ease of use and comfort  
Load space cover  
12 V accessory socket  
Boot fittings  
It is in two parts:  
-
-
a fixed part with an open storage space,  
a movable part which rises when the boot is  
opened, with an open storage space.  
F To connect a 12 V accessory (max. power:  
120 W), remove the cap and connect an  
appropriate adapter.  
1. Load space cover  
2. 12 V accessory socket (120 W)  
3. Boot lamp  
F Switch on the ignition.  
The connection of an electrical device  
not approved by CITROËN, such as  
a USB charger, may adversely affect the  
operation of vehicle electrical systems,  
causing faults such as poor radio  
reception or interference with displays in  
the screens.  
4. Movable cross-piece of the rear seats (to  
increase the volume of the boot)  
5. Stowing rings  
6. Adjustable boot floor (2 positions)  
To remove the load space cover:  
F unhook the two cords 1,  
F gently lift the movable part 2, then unclip it  
on each side 3,  
7.  
Storage wells/tool box under the floor  
The stowing rings are designed to secure  
luggage using different types of retaining  
nets.  
F unclip the fixed part on each side 4, then  
remove the load space cover.  
Such nets are available as an option or as  
an accessory.  
For more information, contact a CITROËN  
dealer.  
When sharp deceleration occurs, objects  
placed on the load space cover can turn  
into projectiles.  
For the installation of a high load retaining  
net, refer to the corresponding section.  
76  
Ease of use and comfort  
F Remove the load space cover.  
F Insert the ends of the bar, one after the  
other, into the fixing points of the roof.  
F Attach the straps of the net to the lower  
rings, located on each side trim of the boot.  
F Pull on the straps to stretch the net.  
Behind the front seats  
High load retaining net  
3
2-position boot floor  
This two-position floor allows the boot volume  
to be optimised using the lateral stops located  
on the sides:  
F Fold down the rear seats.  
F Insert the ends of the bar, one after the  
other, into the fixing points in the roof.  
F Attach the net's straps to the upper  
anchoring points, located in the housing of  
the Top Tether fixings.  
-
High position (100 kg max): to obtain a flat  
floor up to the front seats, when the rear  
seats are folded down.  
This removable net allows the entire loading  
volume up to the roof to be used:  
-
Low position (150 kg max): maximum boot  
volume.  
-
behind the front seats (1st row) when the  
rear seats are folded down,  
F Pull on the straps to stretch the net.  
-
behind the rear seats (2nd row) when the  
load space cover is removed.  
Behind the rear seats  
It offers protection to the occupants when  
very sharp braking occurs.  
77  
Ease of use and comfort  
To change the height:  
Storage well  
Boot lighting  
F Lift and pull the floor towards you using its  
central handle, then use the lateral stops to  
move it.  
F Push the floor all the way forwards to place  
it in the desired position.  
Ensure that the boot is empty before  
moving the boot floor.  
F Raise the boot floor as much as possible to  
access the storage well.  
This comes on automatically when the boot is  
opened and goes off automatically when the  
boot is closed.  
Depending on version, it includes:  
-
a temporary puncture repair kit with the  
vehicle tools,  
-
a spare wheel with the vehicle tools.  
The lighting time varies according to the  
circumstances:  
-
-
-
when the ignition is off, approximately  
ten minutes,  
in energy economy mode,  
approximately thirty seconds,  
with the engine running, unlimited.  
To increase the boot volume with the floor in  
the low position:  
F Pull the cross-piece of the rear seats up  
vertically to the level of the markings to  
remove it.  
F To put it back in place, push it as far as it will  
go, until it engages.  
78