In the event of a breakdown
For more information on Misfuel
prevention (Diesel), refer to the
corresponding section.
Assembling and placing the
triangle
Warning triangle
As a safety precaution, before leaving your
vehicle to set up and install the triangle, switch
on the hazard warning lamps and put on your
high visibility vest.
BlueHDi 130 engines
F Fill the fuel tank with at least 5 litres of
Diesel.
F Switch on the ignition (without starting the
engine).
Storage compartment
F Wait around 1 minute and switch off the
ignition.
F Operate the starter to start the engine.
If the engine does not start, repeat the
procedure.
For versions supplied with a triangle as original
equipment, refer to the illustration above.
For other versions, refer to the assembly
instructions provided with the triangle.
F Put the triangle in place behind the vehicle,
as required by local legislation.
BlueHDi 180 engines
There is a compartment in the interior trim of
the tailgate to store a triangle.
F Open the tailgate.
F Release the cover by turning the screw
a quarter turn anti-clockwise.
F Fill the fuel tank with at least 5 litres of
Diesel.
F Switch on the ignition (without starting the
engine).
F Wait around 6 seconds and switch off the
ignition.
F Repeat the last two operations 10 times.
F Operate the starter to start the engine.
Running out of fuel (Diesel)
On vehicles fitted with Diesel engines, the fuel
system must be primed if you run out of fuel.
If the engine does not start first time, do not
keep trying, but start the procedure again from
the beginning.
8
197
