Access -> Alarm for Your Citroen C5 SUV 2020

Access  
System which protects and provides a deterrent  
against theft and break-ins. It provides the  
following types of monitoring:  
Unlocking  
Locking the vehicle with full  
alarm system  
F Fold the rear seats to gain access to the  
lock from inside the boot.  
-
Exterior perimeter:  
Activation  
The system checks whether the vehicle is  
opened. The alarm is triggered if anyone  
tries to open a door, the boot or the bonnet.  
Interior volumetric:  
F Switch off the engine and exit the vehicle.  
F Lock or deadlock the vehicle using the  
remote control or the "Keyless Entry and  
Starting" system.  
When the monitoring system is active, the  
indicator lamp in the button flashes once per  
second and the direction indicators come on for  
about 2 seconds.  
2
-
The system checks for any variation of the  
volume in the passenger compartment.  
The alarm is triggered if anyone breaks  
a window, enters the passenger  
compartment or moves inside the vehicle.  
Anti-tilt:  
-
F Insert a small screwdriver into hole A of the  
lock to unlock the tailgate.  
F Move the latch to the left.  
The exterior perimeter monitoring is activated  
after 5 seconds and the interior volumetric and  
anti-tilt monitoring after 45 seconds.  
The system checks for any change in  
the attitude of the vehicle. The alarm is  
triggered if the vehicle is lifted, moved or  
knocked.  
Locking after closing  
If the fault persists after closing again, the boot  
will remain locked.  
If an opening (door, boot, bonnet, etc.)  
is incorrectly closed, the vehicle is  
not locked, but the exterior perimeter  
monitoring will be activated after  
45 seconds, at the same time as the  
interior volumetric and anti-tilt monitoring.  
Self-protection function: the system  
checks for the disabling of its own  
components. The alarm is triggered  
if the battery, button or siren wiring is  
disconnected or damaged.  
Alarm  
Deactivation  
For all work on the alarm system,  
contact a CITROËN dealer or a qualified  
workshop.  
F Unlock the vehicle using the remote control  
or the "Keyless Entry and Starting" system.  
With the remote control:  
49  
Access  
short press  
long press  
The exterior perimeter monitoring alone is  
activated: the indicator lamp flashes once per  
second.  
To take effect, this deactivation must be carried  
out after each time the ignition is switched off.  
Locking the vehicle  
with exterior perimeter  
monitoring only  
Deactivate the interior volumetric monitoring  
to avoid unwanted triggering of the alarm in  
certain cases such as:  
Reactivating the interior  
volumetric and anti-tilt  
monitoring  
The monitoring system is deactivated: the  
indicator lamp in the button goes off and the  
direction indicators flash for about 2 seconds.  
-
-
-
-
-
-
leaving a pet in the vehicle,  
leaving a window partially open,  
washing your vehicle,  
changing a wheel,  
having your vehicle towed,  
transport by ship.  
F Deactivate the exterior perimeter monitoring  
by unlocking the vehicle using the remote  
control or the "Keyless Entry and Starting"  
system.  
If the vehicle automatically locks itself  
again (as happens if a door or the boot  
is not opened within 30 seconds of  
unlocking), the monitoring system is  
automatically reactivated.  
F Reactivate the alarm system normally.  
Deactivating the interior  
volumetric and anti-tilt  
monitoring  
Locking the vehicle without  
activating the alarm  
Triggering of the alarm  
F Lock or deadlock the vehicle using the key  
(integral to the remote control) in the driver's  
door lock.  
This is indicated by sounding of the siren and  
flashing of the direction indicators for thirty  
seconds.  
The volumetric and anti-tilt monitoring functions  
remain active until the tenth successive time  
the alarm is triggered.  
When the vehicle is unlocked using the remote  
control or the "Keyless Entry and Starting"  
system, rapid flashing of the indicator lamp  
in the button informs you that the alarm was  
triggered during your absence. When the  
ignition is switched on, this flashing stops  
immediately.  
Failure of the remote  
control  
To deactivate the monitoring functions:  
F unlock the vehicle using the key (integral to  
the remote control) in the driver's door lock,  
F Open the door; this sets off the alarm.  
F Upon switching on the ignition the alarm  
stops. The button indicator lamp goes off.  
F Switch off the ignition and within  
10 seconds, press this button until the  
indicator lamp is on continuously.  
F Get out of the vehicle.  
F Immediately lock the vehicle using the  
remote control or the "Keyless Entry and  
Starting" system.  
50  
Access  
For your children's safety, press switch  
5 to prevent operation of the rear windows  
Operating fault  
Automatic operation  
irrespective of their positions.  
When the ignition is switched on, fixed  
illumination of the indicator lamp in the button  
indicates a fault with the system.  
Have it checked by a CITROËN dealer or  
a qualified workshop.  
F To open/close the window, press/pull the  
switch beyond the resistance point: the  
window opens/closes completely when the  
switch is released.  
Operating the switch again stops the movement  
of the window.  
The red indicator lamp in the button comes  
on, accompanied by a message confirming  
activation of the system. It remains on for as  
long as the deactivation is maintained.  
Use of the rear electric windows from the  
driver's controls remains possible.  
2
Electric windows  
The electric window switches remain  
operational for approximately 45 seconds  
after switching off the ignition.  
Once this time has elapsed, the electric  
windows will not operate. To reactivate  
them, switch the ignition on again.  
Reinitialising the electric  
windows  
Following reconnection of the battery, or if  
the windows move abnormally, the anti-pinch  
function must be reinitialised.  
The safety anti-pinch function is not active  
during these operations.  
For each of the windows:  
1. Left-hand front.  
2. Right-hand front.  
3. Right-hand rear.  
4. Left-hand rear.  
Safety anti-pinch  
When the window rises and meets an obstacle,  
it stops and immediately partially lowers again.  
5. Deactivation of the electric window  
controls located at the rear seats.  
F Lower the window fully, then raise it; it will  
rise in steps of a few centimetres each time  
the control is pressed. Repeat the operation  
until the window is fully closed.  
F Continue to pull the switch for at least one  
second after reaching the window closed  
position.  
Deactivating the rear  
controls for the rear  
windows  
Manual operation  
To open or close the window, press or pull the  
switch gently, without exceeding the point of  
resistance. The window stops as soon as the  
switch is released.  
51