Driving
The ABS and DSC systems ensure stability of
the vehicle during emergency braking.
If the emergency braking malfunctions, the
message "Parking brake control faulty" will be
displayed in the instrument panel.
Gearbox selector positions
Only engage reverse gear when the
vehicle is stationary with the engine at
idle.
As a safety precaution and to facilitate
starting of the engine, always select
neutral and depress the clutch pedal.
If the ABS and DSC systems malfunction,
signalled by the illumination of one or both
warning lamps in the instrument panel, then
stability of the vehicle is no longer guaranteed.
In this event, stability must be assured by the
driver by repeating alternate "pull-release"
actions on the control lever until the vehicle is
immobilised.
Engaging 5th or 6th gear
F Move the lever fully to the right to engage 5th
or 6th gear.
P. Park.
6-speed manual gearbox
Engaging reverse gear
Failure to follow this advice may cause
permanent damage to the gearbox
(engagement of 3rd or 4th gear by mistake).
For parking the vehicle: the front wheels
are blocked.
6
R. Reverse.
N. Neutral.
For moving the vehicle with the ignition
off: in certain car washing machines,
when towing the vehicle, etc.
Automatic gearbox (EAT6/
EAT8)
D. Automatic mode.
The gearbox manages gear changes
according to the style of driving, the road
profile and the vehicle load.
Automatic 6 or 8-speed gearbox with a push
selector. It also offers a manual mode with gear
changes via control paddles situated behind
the steering wheel.
M. Manual mode.
F Raise the trigger under the knob and move
The driver changes gear using the
steering mounted controls.
the gear lever to the left, then forwards.
125
