Driving -> Programmable speed limiter for Your Citroen C5 SUV 2020

Driving  
4. Pause/resume speed limiter with the  
Switching on/pausing  
Programmable speed  
limiter  
Refer to the General recommendations on  
the use of driving and manoeuvring aids.  
speed setting previously stored.  
F Turn the thumbwheel 1 to the LIMIT position  
to select the speed limiter; the function is  
paused.  
5. Depending on version:  
Display of speed thresholds recorded  
using Memorising speeds.  
or  
F If the speed setting is suitable (last speed  
setting programmed in the system), press  
button 4 to switch the speed limiter on.  
Use the speed suggested by the Speed  
Limit recognition and recommendation  
(MEM display).  
This system prevents the vehicle  
from exceeding the speed  
programmed by the driver (speed  
setting).  
F Pressing button 4 again temporarily  
For more information on Memorising speeds  
or on the Speed Limit recognition and  
recommendation, refer to the corresponding  
sections.  
interrupts the function (pause).  
The speed limiter is switched on manually.  
The minimum speed setting is 19 mph  
(30 km/h).  
The speed setting remains in the system  
memory when the ignition is switched off.  
Adjusting the Speed  
Limit recognition and  
recommendation setting  
You do not have to switch the speed limiter on  
in order to set the speed.  
Displays in the instrument panel  
Steering mounted control  
To modify the limit speed setting from the  
current speed of the vehicle:  
F in steps of +/- 1 mph (km/h), make  
successive short presses on button 2 or 3,  
F continuously, in steps of +/- 5 mph (km/h),  
press and hold button 2 or 3.  
To modify the limit speed setting using  
memorised speeds and from the touch screen:  
F press button 5 to display the memorised  
speed settings,  
F press the button for the desired speed  
setting.  
6. Indication of speed limiter on (amber  
colour)/pause (grey colour).  
7.  
Indication of speed limiter mode selection.  
1. ON (LIMIT position)/OFF (0 position).  
2. Reduce the speed setting.  
8. Programmed speed value.  
9. Speed suggested by the Speed Limit  
recognition and recommendation system  
(depending on version).  
3. Increase the speed setting.  
142  
Driving  
The selection screen closes after a few  
moments.  
This setting becomes the new limit speed.  
When the limit speed is exceeded but this is not  
due to action by the driver (in case of a steep  
slope, for example), an audible signal triggers  
immediately.  
On sharp acceleration, as when  
descending a steep hill, the speed limiter  
will not be able to prevent the vehicle from  
exceeding the programmed speed.  
The speed limiter is deactivated  
temporarily and the displayed  
To modify the speed limiter setting using  
the speed suggested by the Speed Limit  
recognition and recommendation system:  
F the speed suggested is displayed in the  
instrument panel,  
F make a first press on button 5; a message  
is displayed to confirm the memorisation  
request,  
F press button 5 again to save the suggested  
speed.  
The speed displays immediately in the  
instrument panel as the new speed setting.  
Once the speed of the vehicle returns to  
the programmed setting, the speed limiter  
functions again: the display of the programmed  
speed setting becomes fixed again.  
programmed speed flashes.  
An audible signal accompanies the  
flashing of the programmed speed when  
exceeding the speed is not due to an  
action by the driver.  
The use of mats not approved by  
CITROËN may interfere with the operation  
of the speed limiter.  
Switching off  
F Turn the thumbwheel 1 to the "0" position:  
the display of information on the speed  
limiter disappears.  
To avoid any risk of jamming of the pedals:  
-
-
ensure that the mat is positioned  
correctly,  
never fit one mat on top of another.  
Temporarily exceeding the  
programmed speed  
Malfunction  
Flashing of the dashes indicates a fault with the  
speed limiter.  
Have it checked by a CITROËN dealer or  
a qualified workshop.  
6
F To temporarily exceed the programmed  
speed threshold, fully depress the  
accelerator pedal.  
The speed limiter is deactivated temporarily  
and the displayed programmed speed flashes.  
If it is exceeded for a prolonged period of time,  
an audible warning is triggered.  
Simply release the accelerator pedal to return  
to below the programmed speed.  
143