Driving -> Starting / Switching off the engine with the key (Keyless) for Your Citroen C5 SUV 2020

Driving  
F Insert the key into the ignition switch; the  
system recognises the code.  
F Unlock the steering column by  
simultaneously turning the steering wheel  
and the key.  
Anti-theft protection  
Avoid attaching heavy objects to the key  
or the remote control, which would weigh  
down on its blade in the ignition switch  
and could cause a malfunction.  
Electronic immobiliser  
The keys include an electronic engine  
immobiliser system, whose secret code must  
be recognised in order for starting to be  
possible.  
If the system malfunctions, indicated by the  
display of a message, the engine will not start.  
Contact the CITROËN dealer.  
In certain cases, you may have to apply  
significant force to move the steering  
wheel (wheels on full lock, for example).  
Ignition on position  
It allows the use of the vehicle's electric  
equipment or portable devices to be charged.  
Once the state of charge of the battery drops  
to the reserve level, the system switches to  
energy economy mode: the power supply is  
cut off automatically to preserve the remaining  
battery charge.  
F With a petrol engine, operate the starter  
motor by turning the key to position  
3 without pressing the accelerator pedal,  
until the engine starts. Once the engine  
starts, release the key.  
Starting/Switching off the  
engine with the key  
Key ignition switch  
With petrol engines, after a cold start,  
preheating the catalytic converter can  
cause noticeable engine vibrations for  
anything up to 2 minutes while stationary  
with the engine running (accelerated idle  
speed).  
Switching off the engine leads to a loss of  
braking assistance.  
Starting the engine  
Parking brake applied:  
F With a manual gearbox, place the gear  
lever in neutral then depress the clutch  
pedal fully.  
F With an automatic gearbox, place the gear  
selector in mode N or P then depress the  
brake pedal fully.  
F With a Diesel engine, turn the key to  
position 2, ignition on, to operate the engine  
pre-heating system.  
It has 3 positions:  
-
position 1 (Stop): inserting and removing  
the key, steering column locked.  
position 2 (Ignition on): steering column  
unlocked, ignition on, Diesel preheating,  
engine running,  
-
-
position 3 (Starting).  
118  
Driving  
Wait until this warning lamp goes off  
in the instrument panel, then operate  
the starter motor by turning the key  
to position 3 without pressing the  
accelerator pedal, until the engine  
starts. Once the engine starts,  
release the key.  
Energy economy mode  
Switching off the engine  
After switching off the engine (position 1  
F Stop the vehicle.  
F With the engine running at idle, turn the key  
to position 1.  
F Remove the key from the ignition switch.  
F To lock the steering column, turn the  
steering wheel until it locks.  
- Stop), for a maximum of 30 minutes you  
can still use functions such as the audio and  
telematic system, the wipers, dipped beam  
headlamps, courtesy lamps, etc.  
In wintry conditions, the warning lamp  
may stay on for a longer period. When the  
engine is hot, the warning lamp does not  
come on.  
To facilitate unlocking of the steering  
column, it is recommended that the  
wheels be returned to the straight ahead  
position before switching off the engine.  
For more information on Energy  
economy mode, refer to the  
corresponding section.  
If the engine does not start straight away,  
switch off the ignition. Wait a few seconds  
before operating the starter motor again.  
If the engine does not start after several  
attempts, do not keep trying: you risk  
damaging the starter motor and the  
engine. Contact a CITROËN dealer or  
a qualified workshop.  
Key left in  
F Check that the parking brake is correctly  
If the key has been left in the ignition  
switch at position 2 (Ignition on), the  
ignition will be switched off automatically  
after one hour.  
To switch the ignition back on, turn the key  
to position 1 (Stop), then back to position  
2 (Ignition on).  
applied, particularly on sloping ground.  
6
Never switch off the ignition before the  
vehicle is at a complete stop. With the  
engine off, the braking and steering  
assistance systems are also cut off: risk of  
loss of control of the vehicle.  
In mild conditions, do not leave the engine  
at idle to warm up but move off straight  
away and drive at moderate speed.  
When you leave the vehicle, keep the key  
with you and lock the vehicle.  
119  
Driving  
F Press the "START/STOP" button while  
maintaining pressure on the pedal until the  
engine starts.  
Switching off the engine  
Starting/Switching off the  
engine with Keyless Entry  
and Starting  
F Immobilise the vehicle, engine at idle.  
F With a manual gearbox, ideally put the  
gear lever into neutral.  
F With an automatic gearbox, ideally select  
mode P or N.  
For Diesel engines, when the temperature is  
below zero and/or the engine is cold, starting  
will only occur once the preheater warning  
lamp is off.  
The electronic key must be present in the  
passenger compartment.  
If it is not detected, a message is  
displayed.  
Move the electronic key so that the engine  
can be started or stopped.  
If there is still a problem, refer to the "Key  
not detected – Back-up starting or Back-  
up switch-off " section.  
F Press the "START/STOP" button.  
If this warning lamp comes on after  
pressing the "START/STOP" button:  
In some circumstances, it is necessary to turn  
the steering wheel to lock the steering column.  
On certain versions with the EAT8 automatic  
gearbox, the steering column does not lock, but  
the gearbox locks in mode P.  
F You should keep the pedal fully depressed  
and not press the "START/STOP" button  
again until the engine is running.  
If one of the starting conditions is not met, a  
message is displayed.  
Starting the engine  
In some circumstances, you are alerted by  
a message that it is necessary to turn the  
steering wheel while pressing the "START/  
STOP" button, to help unlock the steering  
column.  
If the vehicle is not immobilised, the  
engine will not stop.  
Never leave your vehicle with the  
electronic key still inside.  
With petrol engines, after a cold start,  
preheating the catalytic converter can  
cause noticeable engine vibrations for  
anything up to 2 minutes while stationary  
with the engine running (accelerated idle  
speed).  
Switching off the engine leads to a loss of  
braking assistance.  
F With a manual gearbox, place the gear  
lever in neutral and depress the clutch pedal  
fully.  
or  
F With an automatic gearbox, select mode P  
or N and press the brake pedal.  
120  
Driving  
In the event of a fault with the electronic key,  
contact a CITROËN dealer or a qualified  
workshop.  
Switching the ignition on  
without starting  
Emergency switch-off  
In the event of an emergency only, the engine  
can be switched off without conditions (even  
when driving).  
Press the "START/STOP" button for about  
5 seconds.  
In this case, the steering column locks as soon  
as the vehicle stops.  
F Place and hold the remote control against  
the reader.  
With the electronic key inside the vehicle,  
pressing the "START/STOP" button, without  
pressing any of the pedals, allows the  
ignition to be switched on without starting the  
engine (turning on the instrument panel and  
accessories such as the audio system and the  
lighting).  
F With a manual gearbox, place the gear  
lever in neutral, then fully depress the clutch  
pedal.  
On certain versions with the EAT8 automatic  
gearbox, the steering column does not lock.  
F With an automatic gearbox, select mode  
P, then fully depress the brake pedal.  
Electric parking brake  
F Press the "START/STOP" button.  
The engine starts.  
6
In automatic mode, this system applies the  
parking brake when the engine is switched off  
and releases it when the vehicle moves off.  
F Press this button again to switch off the  
ignition and allow the vehicle to be locked.  
Back-up switch-off  
When the electronic key is not detected or is  
no longer in the recognition zone, a message  
appears in the instrument panel when closing  
a door or trying to switch off the engine.  
F To confirm the instruction to switch off the  
engine, press the "START/STOP" button for  
about five seconds.  
Key not detected  
Back-up starting  
A back-up reader is fitted to the steering  
column to allow the engine to be started if  
the system does not detect the key in the  
recognition zone, or when the battery in the  
electronic key is discharged.  
121