Ease of use and comfort -> Mirrors for Your Citroen C5 SUV 2020

Ease of use and comfort  
The massage settings are adjusted in the touch  
screen.  
They can also be folded for parking in narrow  
spaces.  
Steering wheel adjustment  
The function is activated using the button on  
the front seat.  
Demisting/Defrosting  
F Press this button; its indicator  
If fitted to your vehicle, the  
lamp comes on.  
demisting/defrosting of the door  
mirrors is done by pressing the rear  
screen defrosting control.  
The function is activated immediately with the  
last settings memorised and the settings page  
is displayed in the touch screen.  
If the settings suit you and you make no  
changes, the display returns to its original  
state.  
For more information on Rear screen demist –  
defrost, refer to the corresponding section.  
F When stationary, pull the control A to  
release the steering wheel.  
F Adjust the height and reach to suit your  
driving position.  
If you want to change the settings:  
F select another type of massage from the  
five offered,  
Adjustment  
F select a massage intensity from the three  
levels offered: "1" (Low), "2" (Normal) or "3"  
(High).  
F Push the control A to lock the steering  
wheel.  
The changes are applied immediately.  
Once activated, the system starts a one hour  
massage cycle, made up of sequences of  
6 minutes of massage followed by 4 minutes  
at rest.  
The system stops automatically at the end of  
the cycle; the indicator lamp for the button goes  
off.  
For safety reasons, these adjustments  
must only be carried out with the vehicle  
stationary.  
F Move control A to the right or to the left to  
select the corresponding mirror.  
F Move control B in any of the four directions  
to adjust.  
Mirrors  
F Return control A to its central position.  
Door mirrors  
Each fitted with an adjustable mirror glass  
providing the lateral rearward vision necessary  
for overtaking or parking.  
58  
Ease of use and comfort  
Rear view mirror  
As a safety measure, the mirrors should  
be adjusted to reduce the blind spots.  
The objects that you see in the mirrors are  
in fact closer than they appear.  
Take this into account in order to  
correctly judge the distance of vehicles  
approaching from behind.  
The folding and unfolding of the door  
mirrors when locking or unlocking the  
vehicle can be deactivated via the vehicle  
configuration menu.  
Equipped with an anti-dazzle system, which  
darkens the mirror glass and reduces the  
nuisance to the driver caused by the sun,  
headlamps from other vehicles, etc.  
Manual model  
If necessary, the mirrors can be folded  
manually.  
Adjustment  
3
F Adjust the mirror so that the glass is  
directed correctly in the "day" position.  
Folding  
Automatic tilting in reverse gear  
F From outside: lock the vehicle using the  
Day/night position  
remote control or the key.  
System which automatically tilts the mirrors  
downwards to assist with parking manoeuvres  
in reverse gear.  
F From inside: with the  
ignition on, pull the control  
A from the central position  
rearwards.  
With the engine running, on engaging reverse  
gear, the mirror glasses tilt downwards.  
They return to their initial position:  
-
-
-
a few seconds after coming out of reverse  
gear,  
once the speed of the vehicle exceeds  
6 mph (10 km/h),  
If the mirrors are folded using control  
A, they will not unfold when the vehicle  
is unlocked. It will be necessary to pull  
control A again.  
F Pull the lever to change to the "night" anti-  
dazzle position.  
F Push the lever to change to the normal  
"day" position.  
on switching off the engine.  
This function is activated/  
Unfolding  
deactivated via the "Vehicle  
settings" tab in the Driving/Vehicle  
menu of the touch screen.  
F From outside: unlock the vehicle using the  
remote control or the key.  
F From inside: with the ignition on, pull  
the control A from the central position  
rearwards.  
59  
Ease of use and comfort  
Automatic "electrochrome" model  
Rear head restraints  
Never drive with passengers seated at  
the rear when the head restraints are  
removed; they must be in place and in the  
high position.  
Longitudinal adjustment  
Seat operations must only be done with  
the vehicle stationary.  
They have two positions:  
This system automatically and progressively  
changes between day and night use by means  
of a sensor measuring the light coming from the  
rear of the vehicle.  
-
a high position, for when the seat is in use:  
F pull the head restraint fully up.  
a low position, for stowing, when the seat  
is not in use:  
Each seat can be adjusted individually.  
-
F press the lugs A to release the head  
restraint and push it fully down.  
In order to ensure optimum visibility during  
your manoeuvres, the mirror lightens  
automatically when reverse gear is  
engaged.  
The rear head restraints can be removed.  
To remove a head restraint:  
F pull the head restraint as far up as it will go,  
F press the lugs A to release the head  
restraint and remove it completely,  
F stow the head restraint.  
Rear seats  
The 3 seats of the 2nd row are independent  
and of the same width. Their backrests are  
adjustable to adapt the boot load space.  
To refit a head restraint:  
F Raise the control and slide the seat  
F insert the head restraint rods into the guides  
in the corresponding seat backrest,  
F push the head restraint down as far as it will  
go,  
forwards or backwards.  
Once the backrest is folded, it is no longer  
possible to slide the seat.  
F press the lugs A to release the head  
restraint and push it fully down.  
60