Instrument panels for Your Citroen C5 SUV 2020

Instruments  
Persistent warning lamp  
Warning and indicator  
lamps  
Displayed as symbols, visual indicators  
which inform the driver of the occurrence  
of a malfunction (warning lamps) or of the  
operating status of a system (operation or  
deactivation indicator lamps). Certain lamps  
light up in two ways (fixed or flashing) and/or in  
several colours.  
1
When the engine is running or the vehicle is  
being driven, the illumination of a red or orange  
warning lamp indicates a fault that needs  
further investigation, using any associated  
message and the description of the warning  
lamp in the documentation.  
Where a warning lamp remains lit  
The references (1), (2) and (3) in the warning  
and indicator lamp description indicate whether  
you should contact a qualified professional  
in addition to the immediate recommended  
actions.  
Associated warnings  
The illumination of a lamp can be accompanied  
by an audible signal and/or a message  
displayed in a screen.  
Relating the type of alert to the operating status  
of the vehicle allows you to determine whether  
the situation is normal or a fault has occurred:  
refer to the description of each lamp for further  
information.  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a CITROËN dealer or a qualified  
workshop.  
(3): Go to a CITROËN dealer or a qualified  
workshop.  
When the ignition is switched on  
Certain red or orange warning lamps come on  
for a few seconds when the ignition is switched  
on. These warning lamps should go off as soon  
as the engine is started.  
For more information on equipment or  
a function, refer to the corresponding section.  
11  
Instruments  
List of warning and indicator lamps  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Red warning/indicator lamps  
STOP  
Fixed, associated  
Indicates a serious fault with the  
engine, braking system, power  
steering, automatic gearbox or  
a major electrical fault.  
Carry out (1) and then (2).  
with another warning  
lamp, accompanied  
by the display of  
a message and an  
audible signal.  
Engine oil  
pressure  
Fixed.  
There is a fault with the engine  
lubrication system.  
Carry out (1) and then (2).  
Maximum  
coolant  
temperature  
Fixed.  
The temperature of the cooling  
system is too high.  
Carry out (1), then wait until the engine has cooled  
down before topping up to the required level if  
necessary. If the problem persists, carry out (2).  
Battery charge  
Door(s) open  
Fixed.  
The battery charging circuit has  
a fault (dirty or loose terminals, slack  
or cut alternator belt, etc.).  
Clean and retighten the terminals. If the warning  
lamp does not go off when the engine is started, carry  
out (2).  
Fixed, associated with If one of the doors or the boot is not  
a message identifying fully closed (speed below 6 mph  
the door.  
[10 km/h]).  
Fixed, associated with If one of the doors or the boot is not  
a message identifying fully closed (speed above 6 mph  
the door, together with [10 km/h]).  
an audible signal.  
12  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Seat belt not  
fastened/  
unfastened  
Fixed or flashing  
accompanied by an  
audible signal.  
A seat belt has not been fastened or  
has been unfastened.  
Electric parking  
brake  
Fixed.  
The electric parking brake is applied.  
Flashing.  
The electric parking brake is not  
applied automatically.  
The application/release is faulty.  
Carry out (1): park on level ground (horizontally).  
With a manual gearbox, engage a gear.  
With an automatic gearbox, place the gear selector  
in mode P.  
Switch off the ignition and carry out (2).  
Braking  
Fixed.  
Fixed.  
The brake fluid level has dropped  
significantly.  
Carry out (1), then top up with fluid that complies with  
the manufacturer's recommendations. If the problem  
persists, carry out (2).  
The electronic brake force  
Carry out (1) and then (2).  
distribution (EBFD) system is faulty.  
+
13  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Orange warning/indicator lamps  
Anti-lock Braking Fixed.  
System (ABS)  
The anti-lock braking system has  
a fault.  
The vehicle retains conventional braking.  
Drive carefully at reduced speed, then carry out (3).  
Service  
Temporarily on,  
accompanied by the  
display of a message.  
One or more minor anomalies,  
for which there is/are no specific  
warning lamp, have been detected.  
Identify the cause of the anomaly using the message  
displayed in the instrument panel.  
You can deal with certain anomalies yourself, for  
example an open door or the start of saturation of the  
particle filter.  
For other anomalies, such as a fault with the tyre  
under-inflation detection system, carry out (3).  
Fixed, accompanied  
by the display of  
a message.  
One or more major anomalies,  
for which there is/are no specific  
warning lamp, have been detected.  
Identify the cause of the anomaly using the message  
displayed in the instrument panel, then carry out (3).  
Service warning lamp  
fixed and service  
spanner flashing then  
fixed.  
The servicing interval has been  
exceeded.  
The vehicle must be serviced as soon as possible.  
Only with BlueHDi Diesel engines.  
+
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a CITROËN dealer or a qualified  
workshop.  
(3): Go to a CITROËN dealer or a qualified  
workshop.  
14  
Instruments  
Warning/indicator lamp  
AdBlue®  
State  
Cause  
Actions/Observations  
1
On for around  
The remaining driving range is  
between 1,500 and 500 miles  
(2,400 and 800 km).  
Top up the AdBlue®.  
30 seconds when  
starting the vehicle,  
accompanied by  
a message indicating  
the remaining driving  
range.  
Fixed, on switching  
on the ignition,  
accompanied by an  
audible signal and  
The remaining driving range is  
between 500 and 62 miles (800 and  
100 km).  
Top up the AdBlue® as soon as possible, or carry  
out (3).  
a message indicating the  
remaining driving range.  
Flashing,  
The remaining driving range is less  
than 62 miles (100 km).  
You must top up the AdBlue® to avoid starting  
being prevented, or carry out (3).  
accompanied by an  
audible signal and  
a message indicating  
the remaining driving  
range.  
Flashing,  
The AdBlue® tank is empty: the  
starting prevention system required  
by legislation prevents starting of the  
engine.  
To restart the engine, top up the AdBlue® or carry  
accompanied by an  
audible signal and  
a message indicating  
that starting is  
prevented.  
out (2).  
It is essential to add at least 5 litres of AdBlue® to its  
tank.  
15  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
SCR emissions  
control system  
Fixed when the ignition is  
switched on, accompanied control system has been detected.  
A fault with the SCR emissions  
This alert disappears once the exhaust emissions  
return to normal levels.  
by an audible signal and  
a message.  
+
+
AdBlue® warning lamp Depending on the message  
flashing, on switching  
on the ignition,  
associated with the  
fixed Service and  
Engine self-diagnostic  
warning lamps,  
Carry out (3) as soon as possible to avoid starting  
being prevented.  
displayed, you can continue driving  
for up to 685 miles (1,100 km) before  
the engine starting prevention  
system is triggered.  
accompanied by an  
audible signal and  
a message indicating  
the remaining driving  
range.  
AdBlue® warning  
lamp flashing, on  
switching on the  
ignition, associated  
with the fixed Service  
and Engine self-  
An engine immobiliser prevents  
the engine from restarting (over  
the authorised driving limit after  
confirmation of a fault with the  
emissions control system).  
To start the engine, carry out (2).  
diagnostic warning  
lamps, accompanied  
by an audible signal  
and a message  
indicating that starting  
is prevented.  
16  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Engine self-  
diagnostic  
system  
Flashing.  
The engine management system has There is a risk that the catalytic converter will be destroyed.  
a fault.  
Carry out (2) without fail.  
Fixed.  
The emission control system has  
a fault.  
The warning lamp should go off when the engine is started.  
Carry out (3) quickly.  
Collision Risk  
Alert/Active  
Safety Brake  
Flashing.  
The system is operating.  
The vehicle brakes briefly so as to reduce the speed  
of frontal collision with the vehicle ahead.  
Fixed, accompanied  
by a message and an  
audible signal.  
The system has a fault.  
Carry out (3).  
Collision Risk  
Alert/Active  
Safety Brake  
Fixed, accompanied  
by the display of  
a message.  
The system has been deactivated, via  
the vehicle configuration menu.  
Active Lane  
Departure  
Fixed.  
The system has been automatically  
deactivated or placed on standby.  
Warning System  
Flashing.  
You are about to cross a broken  
lane marking without operating the  
direction indicators.  
The system is activated, then corrects the trajectory  
on the side of the lane marking detected.  
Active Lane  
Departure  
Fixed.  
The system has a fault.  
Carry out (3).  
Warning System  
+
17  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Active Lane  
Keeping Assist  
Fixed, accompanied  
by the Service  
The system has a fault.  
Carry out (3).  
warning lamp.  
+
Dynamic  
Fixed.  
The system is deactivated.  
The DSC/ASR system is reactivated automatically  
when the vehicle is started, and from around 31 mph  
(50 km/h).  
Below 31 mph (50 km/h), you can reactivate it  
manually.  
stability control  
(DSC)/Anti-slip  
regulation (ASR)  
Dynamic  
Flashing.  
Fixed.  
The DSC/ASR adjustment is  
activated if there is a loss of grip or  
trajectory.  
stability control  
(DSC)/Anti-slip  
regulation (ASR)  
The DSC/ASR system has a fault.  
Carry out (3).  
Emergency  
brake fault (with  
electric parking  
Fixed, accompanied  
by the message  
"Parking brake fault".  
Emergency braking does not have  
full power.  
If automatic release is not available, use manual  
release.  
+
brake)  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a CITROËN dealer or a qualified  
workshop.  
(3): Go to a CITROËN dealer or a qualified  
workshop.  
18  
Instruments  
Warning/indicator lamp  
Under-inflation  
State  
Cause  
Actions/Observations  
1
Fixed, accompanied  
by an audible signal  
and a message.  
The pressure in one or more wheels  
is too low.  
Check the pressure of the tyres as soon as possible.  
Reinitialise the detection system after adjusting the  
pressure.  
Under-inflation  
warning lamp flashing are no longer monitored.  
then fixed and  
Service warning lamp  
fixed.  
The system is faulty: tyre pressures  
Under-inflation detection is no longer monitored.  
As soon as possible, check the pressure of the tyres  
and carry out (3).  
+
Diesel engine  
pre-heating  
Fixed.  
The ignition is on.  
Wait until the warning lamp goes off before starting.  
If the engine does not start, switch the ignition off and  
then on, wait until the lamp goes off again, then start  
the engine.  
The period of  
illumination depends  
on the climatic  
conditions.  
Front passenger Fixed.  
airbag (ON)  
The front passenger airbag is  
activated.  
The control is in the "ON" position.  
In this case, do NOT install a "rearward facing"  
child seat on the front passenger seat – risk of  
serious injury!  
Front passenger Fixed.  
airbag (OFF)  
The front passenger airbag is  
deactivated.  
The control is in the "OFF" position.  
You can install a "rearward facing" child seat, unless  
there is a fault with the airbags (Airbags warning lamp  
on).  
Airbags  
Fixed.  
One of the airbags or seat belt  
pretensioners is faulty.  
Carry out (3).  
19  
Instruments  
Warning/indicator lamp  
Low fuel level  
State  
Cause  
Actions/Observations  
Fixed (warning  
When it first comes on, there  
remains approximately 5 litres of  
fuel in the tank (reserve).  
Refuel without delay to avoid running out of fuel.  
Never drive until completely empty, as this could  
damage the emissions control and injection systems.  
lamp or LED) and  
needle in the red  
zone (depending on  
version), accompanied  
by an audible signal  
and a message.  
or  
The audible signal  
and the message  
are repeated with  
increasing frequency  
as the level drops  
towards zero.  
Diesel filter  
Fixed.  
The Diesel filter contains water.  
Risk of damage to the injection system: carry out (2)  
without delay.  
Particle filter  
(Diesel)  
Fixed, accompanied  
by an audible signal  
and a message about  
the risk of particle  
filter blockage.  
This indicates that the particle filter  
is beginning to saturate.  
As soon as the traffic conditions permit, regenerate  
the filter by driving at a speed of at least 37 mph  
(60 km/h) until the warning lamp goes off.  
Fixed, accompanied by This indicates that the level in the  
Carry out (3).  
an audible signal and  
a message signalling  
that the additive level  
in the particle filter is  
too low.  
additive tank is low.  
20  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Deactivation of  
the automatic  
functions (with  
electric parking  
brake)  
Fixed.  
The "automatic application" (on  
switching off the engine) and  
"automatic release" (on acceleration) The brake can be applied or released manually.  
functions are deactivated.  
In the event of a fault, illumination of  
this warning lamp is accompanied by  
a message.  
Carry out (3) if automatic application/release is no  
longer possible.  
Automatic  
application  
(with electric  
Fixed, accompanied  
by the message  
"Parking brake fault".  
Automatic application is not  
available, the parking brake can only  
be used manually.  
Use the electric parking brake control lever.  
If automatic release is also not available, use manual  
release.  
parking brake)  
+
Malfunction  
(with electric  
parking brake)  
Fixed.  
The electric parking brake has  
a fault.  
Carry out (3) quickly.  
Fixed, accompanied  
by the message  
"Parking brake fault".  
You can no longer immobilise the  
vehicle with the engine running.  
If manual application and release are not working, the  
electric parking brake control lever is faulty.  
The automatic functions must be used at all times and  
are automatically reactivated in the event of failure of  
the control lever.  
+
Carry out (2).  
21  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Malfunction  
(with electric  
parking brake)  
Fixed, accompanied  
by the message  
"Parking brake fault".  
The parking brake is faulty: manual  
and automatic functions may not be  
working.  
When stationary, to immobilise your vehicle:  
F Pull and hold the control lever for approximately  
7 to 15 seconds, until the indicator lamp comes on  
in the instrument panel.  
+
If this procedure does not work, secure your vehicle:  
F Park on a level surface.  
F With a manual gearbox, engage a gear.  
F With an automatic gearbox, select P, then put the  
supplied chocks against one of the wheels.  
Then carry out (2).  
+
Rear foglamps  
Fixed.  
The lamps are on.  
Parking sensors Fixed, accompanied  
by the display of  
The system has a fault.  
Carry out (3).  
a message and an  
audible signal.  
Foot on the  
clutch  
Fixed.  
Stop & Start: the change to START  
mode is rejected because the clutch  
pedal is not fully depressed.  
Fully depress the clutch pedal.  
22  
Instruments  
Warning/indicator lamp  
Hill start assist  
State  
Cause  
Actions/Observations  
1
Fixed.  
The system has a fault.  
Carry out (3).  
+
+
Power steering  
Stop & Start  
Fixed.  
The power steering has a fault.  
Drive carefully at moderate speed, then carry out (3).  
Fixed, accompanied  
by the display of  
a message.  
The Stop & Start system is  
deactivated.  
The engine will not switch off at the next traffic stop.  
Press the button to reactivate the Stop & Start.  
Green warning/indicator lamps  
Stop & Start  
Fixed.  
When the vehicle stops, the Stop &  
Start puts the engine into STOP mode.  
Flashing temporarily.  
STOP mode is momentarily  
unavailable or START mode is  
automatically triggered.  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a CITROËN dealer or a qualified  
workshop.  
(3): Go to a CITROËN dealer or a qualified  
workshop.  
23  
Instruments  
Warning/indicator lamp  
Park Assist  
State  
Cause  
Actions/Observations  
Fixed.  
The function is active.  
Active Lane  
Keeping Assist  
Fixed.  
The function has been activated.  
All the conditions have been met: the system is  
operating.  
Direction  
indicators  
Flashing with audible  
signal.  
The direction indicators are on.  
The lamps are on.  
Sidelamps  
Fixed.  
Fixed.  
Fixed.  
Dipped beam  
headlamps  
The lamps are on.  
Automatic  
headlamp  
dipping  
The function has been activated in  
the touch screen (Driving/Vehicle  
menu).  
+
The lighting control stalk is in the  
"AUTO" position.  
or  
24  
Instruments  
Warning/indicator lamp  
Front foglamps  
State  
Cause  
Actions/Observations  
1
Fixed.  
The front foglamps are on.  
Automatic  
wiping  
Fixed.  
Automatic front wiping is activated.  
The main beams are on.  
Blue warning/indicator lamps  
Main beam  
headlamps  
Fixed.  
Black/white warning/indicator lamps  
Hill Assist  
Descent  
Fixed.  
The function has been activated,  
but is currently paused because the  
speed is too high.  
Reduce the vehicle speed to below 19 mph (30 km/h).  
(grey)  
25  
Instruments  
Resetting the service indicator  
Indicators  
Service indicator  
The service indicator is displayed on the instrument panel. Depending on the vehicle version:  
-
-
the distance recorder display line indicates the distance remaining before the next service is  
due, or the distance travelled since it was due preceded by the sign "-".  
an alert message indicates the distance remaining, as well as the period before the next service  
is due or how long it is overdue.  
Warning/indicator  
lamp  
Actions/  
Observations  
State  
Cause  
The service indicator must be reset after each  
service.  
Service  
spanner  
Lights up temporarily  
when the ignition is  
switched on.  
Between 620 and  
If you have carried out the service on your  
vehicle yourself:  
F switch off the ignition,  
F press and hold this button,  
F switch on the ignition; the distance recorder  
display begins a countdown,  
F release the button when =0 is displayed; the  
spanner disappears.  
1,860 miles (1,000 and  
3,000 km) remain before  
the next service is due.  
Fixed, when the  
ignition is switched  
on.  
The service is due in  
less than 620 miles  
(1,000 km).  
Have your vehicle  
serviced very soon.  
Service  
spanner  
flashing  
Flashing then fixed, when  
The servicing interval  
Have your vehicle  
serviced as soon as  
possible.  
the ignition is switched on. has been exceeded.  
(With BlueHDi Diesel  
Following this operation, if you wish to  
disconnect the battery, lock the vehicle  
and wait at least five minutes for the reset  
to be registered.  
+
engines, associated  
with the Service warning  
lamp).  
26  
Instruments  
In the event of a fault with the electric  
indicator, the oil level is no longer  
monitored.  
If the system is faulty, you must check the  
engine oil level using the manual dipstick  
located under the bonnet.  
For more information on Checking levels,  
refer to the corresponding section.  
Retrieving the service  
information  
The level read will only be correct if the  
vehicle is on level ground and the engine  
has been off for more than 30 minutes.  
1
You can access the service information at any  
time in the instrument panel.  
Low oil level  
This is indicated by the display of a message  
prompting you to top up, accompanied by the  
Service warning lamp and an audible signal.  
If the low oil level is confirmed by a check using  
the dipstick, the level must be topped up to  
avoid damage to the engine.  
F Press this button to temporarily display the  
service information.  
Engine coolant temperature  
gauge  
For more information on Checking levels,  
refer to the corresponding section.  
The distance indicated (in miles or  
kilometres) is calculated according to the  
distance covered and the time elapsed  
since the last service.  
Oil level indicator fault  
The alert may be triggered close to a due  
date.  
This is signalled by the display of the "Oil  
level measurement invalid" message in the  
instrument panel.  
Engine oil level indicator  
Contact a CITROËN dealer or a qualified  
workshop.  
(Depending on version.)  
On versions fitted with an electric oil level  
indicator, the state of the engine oil level is  
displayed in the instrument panel for a few  
seconds after switching the ignition on, after  
the servicing information, in the form of  
messages.  
With the engine running:  
-
-
in zone A, the temperature is correct,  
in zone B, the temperature is too high; the  
associated warning lamp and the central  
STOP warning lamp come on in red in the  
instrument panel, accompanied by the  
display of a message and an audible signal.  
27  
Instruments  
You must stop the vehicle as soon as it is  
safe to do so.  
Wait a few minutes before switching off the  
engine.  
Manual display of the range  
Warning/  
indicator Action  
lamps lit  
Remaining  
range  
While the range is greater than 1,500 miles  
(2,400 km), it is not displayed automatically.  
Top up.  
Between 1,500 miles  
and 500 miles  
After switching off the ignition, carefully  
open the bonnet and check the coolant  
level.  
(2,400 km and 800 km)  
Top up as soon  
as possible.  
Between 500 miles  
and 62 miles  
For more information on Checking levels,  
refer to the corresponding section.  
(800 km and 100 km)  
A top-up is  
vital, there is  
the risk that the  
engine will be  
prevented from  
starting.  
Between  
62 miles  
and 0 miles  
(100 km and  
0 km)  
F Press this button to temporarily display the  
driving range.  
AdBlue® range indicators  
(BlueHDi)  
The Diesel BlueHDi engines are equipped with  
a system that associates the SCR (Selective  
Catalytic Reduction) emissions control system  
and the Diesel particle filter (DPF) for the  
treatment of exhaust gases. They cannot  
function without AdBlue® fluid.  
Actions required related to a lack  
of AdBlue®  
The following warning lamps light up when the  
quantity of AdBlue® is lower than the reserve  
level corresponding to a range of 1,500 miles  
(2,400 km).  
Together with the warning lamps, messages  
regularly remind you of the need to top up to  
avoid engine starting being prevented. Refer to  
the Warning and indicator lamps section for  
details of the messages displayed.  
To be able  
0 miles (0 km)  
to restart the  
engine, add at  
least 5 litres of  
AdBlue® to its  
tank.  
The engine starting prevention system  
required by regulations is activated  
automatically once the AdBlue® tank is  
empty. It is then no longer possible to  
start the engine until the minimum level of  
AdBlue® has been topped up.  
For more information on AdBlue®  
(BlueHDi engines), and in particular on  
topping up, refer to the corresponding  
section.  
28  
Instruments  
The AdBlue warning lamp flashes,  
accompanied by the display of a message  
("Emissions fault: Starting prevented in x  
miles") indicating the remaining range in miles  
or kilometres.  
While driving, the message is displayed every  
30 seconds. The alert is repeated when  
switching on the ignition.  
Malfunction of the SCR  
Manual test in the  
instrument panel  
emissions control system  
1
Malfunction detection  
This function allows you, at any time, to check  
certain indicators and display the alerts log.  
If a malfunction is detected,  
these warning lamps come on,  
accompanied by an audible signal  
and the display of an "Emissions  
fault" message.  
You can continue driving for up to 685 miles  
(1,100 km) before the engine starting  
prevention system is triggered.  
Have the system checked by a CITROËN  
dealer or a qualified workshop as soon as  
possible.  
The alert is triggered while driving as soon  
as the fault is detected for the first time, then  
when switching on the ignition for subsequent  
journeys, while the fault persists.  
F With the engine running, briefly press this  
button.  
The following information is displayed in the  
instrument panel:  
Starting prevented  
Every time the ignition is switched on, the  
message "Emissions fault: Starting prevented"  
is displayed.  
-
-
-
the engine oil level,  
when the next service is due,  
the driving range for the AdBlue and the  
SCR system for BlueHDi Diesel versions,  
display of the state of pressure of the tyres,  
current alerts.  
If it is a temporary fault, the alert  
disappears during the next journey,  
after self-diagnostic checks of the SCR  
emissions control system.  
To be able to restart the engine, call  
on a CITROËN dealer or a qualified  
workshop.  
-
-
Malfunction confirmed during the  
permitted driving phase (between  
685 miles and 0 miles (1,100 km and 0 km))  
This information is also displayed  
automatically every time the ignition is  
switched on.  
If the warning lamp is still on after 31 miles  
(50 km) of driving, the fault in the SCR system  
is confirmed.  
29  
Instruments  
and the vehicle's ambient lighting or button B  
to reduce it.  
Release the button when the desired level is  
reached.  
Trip distance recorder  
Distance recorders  
It measures the distance travelled since it was  
reset by the driver.  
With CITROËN Connect  
Radio  
F Press this button to select the  
Settings menu.  
The total and trip distances are displayed for  
thirty seconds when the ignition is switched off,  
when the driver's door is opened and when the  
vehicle is locked or unlocked.  
F Select "Brightness".  
Resetting the trip recorder  
F Adjust the brightness by pressing  
F With the ignition on, press the button until  
the arrows or moving the slider.  
zeros appear.  
When travelling abroad, you may need to  
change the units of distance and speed:  
The display of distance and speed must  
be expressed in the official unit of the  
country (km or miles). The change of units  
is done via the screen configuration menu,  
with the vehicle stationary.  
Lighting dimmer  
The settings are applied immediately.  
F Press outside the settings window to exit.  
This system allows the brightness of the  
instruments and controls to be adjusted to suit  
the ambient light level.  
You can also switch off the screen:  
F Press this button to select the  
Settings menu.  
With buttons  
F Select "Dark".  
Total distance recorder  
It measures the total distance travelled by the  
vehicle since its first registration.  
The screen goes off completely.  
F Press the screen again (anywhere on its  
surface) to activate it.  
With the lamps on, press button A to increase  
the brightness of the instruments and controls  
30  
Instruments  
Display of the different trip computer tabs  
With CITROËN Connect Nav  
Trip computer  
1
Information displayed about the current journey  
F Press this button, located on the end of the  
wiper control stalk, to display the different  
tabs in turn.  
F Press this button to select the  
Settings menu.  
(range, fuel consumption, average speed, etc.).  
-
The current information with:  
Display of data in the  
instrument panel  
F Select "OPTIONS".  
the range,  
the current fuel consumption,  
the Stop & Start time counter.  
F Select "Screen configuration".  
-
Trip "1" with:  
the average speed,  
the average fuel consumption,  
the distance travelled,  
F Select the "Brightness" tab.  
F Adjust the brightness by pressing  
the arrows or moving the slider.  
for the first trip.  
-
Trip "2" with:  
F Press this button to save and exit.  
the average speed,  
the average fuel consumption,  
the distance travelled,  
for the second trip.  
With instrument panels with dials  
The display of trip computer data is selected by  
pressing on the end of the wiper control stalk or  
by rotating the thumb wheel situated to the left  
of the steering wheel.  
You can also switch off the screen:  
Trip reset  
F Press this button to select the  
Settings menu.  
F Select "Switch off screen".  
With digital instrument panel  
Trip computer data is displayed permanently  
when you select the display mode "DRIVING"  
or "PERSONAL", depending on version.  
In all other display modes, pressing the end of  
the wiper control stalk will cause this data to  
appear temporarily in a specific window.  
The screen goes off completely.  
F Press the screen again (anywhere on its  
surface) to activate it.  
F When the desired trip is displayed, press  
the button on the end of the wiper control  
stalk for more than 2 seconds.  
Trips "1" and "2" are independent and are used  
identically.  
31  
Instruments  
Current fuel consumption  
Stop & Start time counter  
A few definitions…  
(mpg or l/100 km or km/l)  
Range  
(minutes/seconds or hours/minutes)  
Calculated during the last few  
seconds.  
(miles or km)  
The distance which can  
If your vehicle is fitted with Stop & Start, a time  
counter calculates the time spent in STOP  
mode during a journey.  
It resets to zero every time the ignition is  
switched on.  
still be travelled with the  
fuel remaining in the tank  
(depending on the average  
fuel consumption over the  
last few miles (kilometres)  
travelled).  
This function is only displayed from 19 mph  
(30 km/h).  
Average fuel consumption  
Touch screen  
(mpg or l/100 km or km/l)  
This system gives access to:  
This value may vary following a change in  
the style of driving or the terrain, resulting  
in a significant change in the current fuel  
consumption.  
Calculated since the last trip  
computer reset.  
-
the permanent display of the time and  
the exterior temperature (a blue symbol  
appears when there is a risk of ice).  
the heating/air conditioning controls.  
the menus for adjusting settings for vehicle  
functions and systems.  
-
-
Average speed  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the  
range is recalculated and is displayed if it  
exceeds 62 miles (100 km).  
(mph or km/h)  
-
-
the audio system and telephone controls  
and the display of associated information.  
the display of visual manoeuvring aid  
functions (visual parking sensor information,  
Park Assist, etc.).  
Calculated since the last trip  
computer reset.  
-
Internet services and the display of  
associated information.  
Distance travelled  
If dashes instead of figures continue  
to be displayed when driving, contact  
a CITROËN dealer or a qualified workshop.  
(miles or km)  
and, depending on equipment, it gives access  
to:  
-
Calculated since the last trip  
computer reset.  
the mode and intensity adjustment for the  
massage function of the front seats.  
the navigation system controls and the  
display of associated information.  
-
32  
Instruments  
The availability of connected navigation  
services is confirmed by the display of  
the TomTom Traffic logo on the map. For  
more information, refer to the connected  
navigation section.  
*
Menus  
For safety reasons, the vehicle must  
always be stationary for the driver to  
perform operations that require close  
attention.  
Some functions are not accessible when  
driving.  
1
** Depending on equipment.  
Telephone.  
Principles  
See the "Audio equipment and telematics" section.  
Use the buttons arranged below the touch  
screen for access to the menus, then press the  
virtual buttons in the touch screen.  
Some menus may display across two pages:  
press the "OPTIONS" button to access the  
second page.  
Applications.  
Display of available connected  
services and access to the Eco-  
coaching function.  
Radio Media.  
See the "Audio equipment and telematics" section.  
Air conditioning.  
Settings for temperature, air flow,  
etc.  
For the other functions, refer to the "Audio  
equipment and telematics" section.  
After a few moments with no action on the  
second page, the first page is displayed  
automatically.  
Press with three fingers on the touch  
screen to show all of the menu buttons.  
For more information on the Manual air  
conditioning and the Dual-zone automatic  
air conditioning, refer to the corresponding  
sections.  
To deactivate/activate a function, select "OFF"  
or "ON".  
Volume adjustment/mute.  
See the "Audio equipment and  
telematics" section.  
Connected navigation.*  
See the "Audio equipment and  
telematics" section.  
Settings for a function.  
Driving or Vehicle.**  
Activation, deactivation and settings  
for certain functions.  
Access to additional information on  
the function.  
Information banner(s)  
Certain information is displayed permanently in  
the touch screen banner(s).  
The functions accessible from this menu are  
arranged on two tabs: "Driving functions" and  
"Vehicle settings".  
Confirm.  
Return to the previous page or  
confirm.  
33  
Instruments  
F Select "Setting the time-date".  
CITROËN Connect Radio upper  
banner  
Date and time adjustment  
-
-
-
Time and exterior temperature (a blue  
warning lamp appears when there is a risk  
of ice).  
Reminder of the air conditioning information,  
and direct access to the corresponding  
menu.  
Reminder of the Radio Media and  
Telephone menus information.  
Notifications.  
Access to the Settings of the touch screen  
and digital instrument panel (date/time,  
languages, units, etc.).  
With CITROËN Connect  
Radio  
F Select the "Date" or "Time" tab.  
F Set the date and/or time using the numeric  
keypad.  
F Select the Settings menu in  
the upper banner of the touch  
screen.  
F Confirm with "OK".  
Additional settings  
F Select "Configuration".  
F Select "Date and time".  
-
-
You can choose:  
-
-
The time zone.  
The display format of the date and time  
(12h/24h).  
-
-
The summer time management function  
(+1 hour).  
The synchronisation with GPS (UTC).  
CITROËN Connect Nav side banners  
F Select "Date" or "Time".  
F Choose the display formats.  
F Change the date and/or time using the  
numeric keypad.  
Left-hand side  
-
Exterior temperature (a blue warning lamp  
appears when there is a risk of ice).  
Access to the Settings of the touch screen  
and digital instrument panel (date/time,  
languages, units, etc.).  
The system does not automatically  
manage the change between winter and  
summer time (depending on the country  
of sale).  
F Confirm with "OK".  
-
With CITROËN Connect Nav  
-
Reminder of the air conditioning information,  
and direct access to the corresponding  
menu.  
Setting of the time and date is only available if  
synchronisation with the GPS is deactivated.  
Right-hand side  
-
-
-
Time.  
Notifications.  
Reminder of the air conditioning information,  
and direct access to the corresponding  
menu.  
F Select the Settings menu in the  
touch screen banner.  
F Press the "OPTIONS" button to go to the  
secondary page.  
34