Instrument panels -> Trip computer for Your Citroen C5 SUV 2020

Instruments  
Display of the different trip computer tabs  
With CITROËN Connect Nav  
Trip computer  
1
Information displayed about the current journey  
F Press this button, located on the end of the  
wiper control stalk, to display the different  
tabs in turn.  
F Press this button to select the  
Settings menu.  
(range, fuel consumption, average speed, etc.).  
-
The current information with:  
Display of data in the  
instrument panel  
F Select "OPTIONS".  
the range,  
the current fuel consumption,  
the Stop & Start time counter.  
F Select "Screen configuration".  
-
Trip "1" with:  
the average speed,  
the average fuel consumption,  
the distance travelled,  
F Select the "Brightness" tab.  
F Adjust the brightness by pressing  
the arrows or moving the slider.  
for the first trip.  
-
Trip "2" with:  
F Press this button to save and exit.  
the average speed,  
the average fuel consumption,  
the distance travelled,  
for the second trip.  
With instrument panels with dials  
The display of trip computer data is selected by  
pressing on the end of the wiper control stalk or  
by rotating the thumb wheel situated to the left  
of the steering wheel.  
You can also switch off the screen:  
Trip reset  
F Press this button to select the  
Settings menu.  
F Select "Switch off screen".  
With digital instrument panel  
Trip computer data is displayed permanently  
when you select the display mode "DRIVING"  
or "PERSONAL", depending on version.  
In all other display modes, pressing the end of  
the wiper control stalk will cause this data to  
appear temporarily in a specific window.  
The screen goes off completely.  
F Press the screen again (anywhere on its  
surface) to activate it.  
F When the desired trip is displayed, press  
the button on the end of the wiper control  
stalk for more than 2 seconds.  
Trips "1" and "2" are independent and are used  
identically.  
31  
Instruments  
Current fuel consumption  
Stop & Start time counter  
A few definitions…  
(mpg or l/100 km or km/l)  
Range  
(minutes/seconds or hours/minutes)  
Calculated during the last few  
seconds.  
(miles or km)  
The distance which can  
If your vehicle is fitted with Stop & Start, a time  
counter calculates the time spent in STOP  
mode during a journey.  
It resets to zero every time the ignition is  
switched on.  
still be travelled with the  
fuel remaining in the tank  
(depending on the average  
fuel consumption over the  
last few miles (kilometres)  
travelled).  
This function is only displayed from 19 mph  
(30 km/h).  
Average fuel consumption  
Touch screen  
(mpg or l/100 km or km/l)  
This system gives access to:  
This value may vary following a change in  
the style of driving or the terrain, resulting  
in a significant change in the current fuel  
consumption.  
Calculated since the last trip  
computer reset.  
-
the permanent display of the time and  
the exterior temperature (a blue symbol  
appears when there is a risk of ice).  
the heating/air conditioning controls.  
the menus for adjusting settings for vehicle  
functions and systems.  
-
-
Average speed  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the  
range is recalculated and is displayed if it  
exceeds 62 miles (100 km).  
(mph or km/h)  
-
-
the audio system and telephone controls  
and the display of associated information.  
the display of visual manoeuvring aid  
functions (visual parking sensor information,  
Park Assist, etc.).  
Calculated since the last trip  
computer reset.  
-
Internet services and the display of  
associated information.  
Distance travelled  
If dashes instead of figures continue  
to be displayed when driving, contact  
a CITROËN dealer or a qualified workshop.  
(miles or km)  
and, depending on equipment, it gives access  
to:  
-
Calculated since the last trip  
computer reset.  
the mode and intensity adjustment for the  
massage function of the front seats.  
the navigation system controls and the  
display of associated information.  
-
32