Lighting and visibility
Cornering lighting
Wiper control stalk
Programming
Your vehicle may also include some functions
that can be configured:
-
-
automatic windscreen wipers,
rear wiping on engaging reverse gear.
In wintry conditions, remove snow, ice or
frost present on the windscreen, around
the wiper arms and blades and the
windscreen seal, before operating the
wipers.
With cornering lighting
4
If fitted to the vehicle, this system makes use
of the beam from a front foglamp to illuminate
the inside of a bend, when the main or dipped
beam headlamps are on and the vehicle speed
is below 25 mph (40 km/h) (urban driving,
winding road, junctions, parking manoeuvres,
etc.).
Activation/Deactivation
The cornering lighting can be
activated or deactivated in the
Vehicle/Driving menu of the touch
screen.
Do not operate the wipers on a dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
Switching on
This system starts:
-
when the corresponding direction indicator
is switched on,
or
-
from a certain angle of rotation of the
steering wheel.
Switching off
The system does not operate:
-
below a certain angle of rotation of the
steering wheel,
-
-
above 25 mph (40 km/h),
when reverse gear is engaged.
Without cornering lighting
85
