Practical information
5. Remote earth point (-).
6. Fusebox.
7. Air filter.
Engine compartment
These engines are examples provided as
a guide.
8. Engine oil filler cap.
9. Engine oil dipstick.
10. Priming pump*
The locations of the following elements may vary:
-
-
-
-
-
Air filter.
Engine oil dipstick.
Engine oil filler cap.
Priming pump.
Degassing screw.
11. Degassing screw*.
*
Depending on engine.
F Lift the safety catch and raise the bonnet.
The Diesel fuel system operates under
very high pressure.
Petrol engine
F Unclip the stay from its housing and place it
All work on this circuit must be carried out
only by a CITROËN dealer or a qualified
workshop.
in the support slot to hold the bonnet open.
Closing
F Take the stay out of the support slot.
F Clip the stay in its housing.
F Lower the bonnet and release it near the
end of its travel.
F Pull on the bonnet to check that it is locked
correctly.
Checking levels
Check all of the following levels regularly in
accordance with the manufacturer's service
schedule. Top them up if required, unless
otherwise indicated.
Diesel engine
If a level drops significantly, have the
corresponding system checked by a CITROËN
dealer or a qualified workshop.
7
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water
(rain, washing, etc.) be limited.
The fluids must comply with the
manufacturer's requirements and with the
vehicle's engine.
1. Screenwash fluid reservoir.
2. Engine coolant reservoir.
3. Brake fluid reservoir.
4. Battery/Fuses.
189
