Windows and Mirrors -> Moonroof for Your Ford Ecosport SUV 2020

Windows and Mirrors  
Note: Do not clean the housing or glass of  
any mirror with harsh abrasives, fuel or other  
petroleum or ammonia-based cleaning  
products.  
You can adjust the interior mirror to your  
preference. Some mirrors also have a  
second pivot point. This lets you move the  
mirror head up or down and from side to  
side.  
Pull the tab below the mirror toward you  
to reduce glare at night.  
Auto-Dimming Mirror (If Equipped)  
Note: Do not block the sensors on the front  
and back of the mirror. Mirror performance  
may be affected. A rear center passenger or  
raised rear center head restraint may also  
block light from reaching the sensor.  
The mirror will dim automatically to reduce  
glare when bright lights are detected from  
behind your vehicle. It will automatically  
return to normal reflection when you select  
reverse gear to make sure you have a clear  
view when backing up.  
The image of the approaching vehicle is  
small and near the inboard edge of the  
main mirror when it is at a distance. The  
image becomes larger and begins to move  
outboard across the main mirror as the  
vehicle approaches (A). The image will  
transition from the main mirror and begin  
to appear in the blind spot mirror as the  
vehicle approaches (B). The vehicle will  
transition to your peripheral field of view  
as it leaves the blind spot mirror (C).  
MOONROOF (IF EQUIPPED)  
WARNING: Do not leave children  
unattended in your vehicle and do not  
let them play with the moonroof. Failure  
to follow this instruction could result in  
personal injury.  
WARNING: When closing the  
moonroof, verify that it is free of  
obstruction and make sure that children  
and pets are not in the proximity of the  
roof opening.  
INTERIOR MIRROR  
WARNING: Do not adjust the  
mirrors when your vehicle is moving. This  
could result in the loss of control of your  
vehicle, serious personal injury or death.  
The sunscreen can be manually opened or  
closed when the glass panel is closed.  
The moonroof control is located on the  
overhead console.  
86  
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing  
Windows and Mirrors  
The moonroof has a one-touch open and  
1. Press the moonroof close control to  
fully close the moonroof. Release and  
press moonroof close control again  
until sunroof moves into full vent  
position.  
close feature. To stop it during one-touch  
operation, press the control a second time.  
OpeningandClosingtheMoonroof  
2. In full vent position, press and hold the  
moonroof close control for  
approximately fifteen seconds, until  
the moonroof moves.  
3. Quickly release the moonroof close  
control, re-press and hold for  
approximately three seconds, until the  
moonroof moves to fully closed, fully  
open and back to fully closed  
automatically.  
Confirm the relearning was successful by  
opening and closing the sun shade.  
The moonroof switch has a two stage  
operation, half press and full press. All  
relearning procedure must be done with  
half press operation.  
Press and release the rear of the control  
to open the moonroof.  
Press and release the front of the control  
to close the moonroof.  
Bounce-Back  
The moonroof will stop automatically  
while closing. It will reverse some distance  
if there is an obstacle in the way.  
Pull and hold the SLIDE control within two  
seconds of a bounce-back event to  
override this function. The first closing  
operation after the override will disable the  
anti-pinch function(bounce-back). After,  
standard operation is restored.  
Venting the Moonroof  
With moonroof closed, press and release  
the front of the switch to vent the  
moonroof. Press and release the rear of  
the switch to close the moonroof.  
In case moon roof functional does not  
work properly, follow this relearning  
procedure:  
87  
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing