Engine and Powertrain -> Hybrid Electric Vehicle Info for Your Ford F 150 Light Truck 2023

Starting and Stopping the Engine  
ACCESSINGTHEPASSIVEKEY  
BACKUP POSITION -  
VEHICLES WITH: KEYLESS  
ENTRY AND PUSH BUTTON  
START  
If you are unable to start your vehicle,  
locate the backup slot in one of two  
positions:  
Vehicles with a center console:  
E269950  
1. Raise the center console storage lid.  
2. Place the remote control in the backup  
slot with the buttons facing toward the  
rear of the vehicle.  
3. Press the brake pedal.  
4. Press the push button ignition switch  
to start the vehicle.  
STARTING AND STOPPING  
THE ENGINE  
E312216  
TROUBLESHOOTING  
1. Remove the mat from the center  
console cup holder.  
2. Place the remote control in the backup  
slot with the buttons facing toward the  
rear of the vehicle.  
STARTING AND STOPPING THE  
ENGINE WARNING LAMPS  
Malfunction Indicator Lamp  
3. Press the brake pedal.  
If it illuminates when the engine  
4. Press the push button ignition switch  
is running, the on-board  
to start the vehicle.  
diagnostics system is detecting  
a malfunction of the vehicle emission  
control system.  
Vehicles without a center console:  
If it flashes, engine misfire could be  
occurring. Increased exhaust gas  
temperatures could damage the catalytic  
converter or other vehicle components.  
Avoid heavy acceleration and deceleration,  
and have your vehicle checked as soon as  
possible.  
240  
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM  
 
Starting and Stopping the Engine  
possible.  
Powertrain Warning Lamp  
If both lamps illuminate when the engine  
If it illuminates when the engine  
is running, stop your vehicle as soon as it  
is safe to do so. Continuing to drive your  
vehicle could cause reduced power or the  
engine to stop. Switch the ignition off and  
attempt to restart the engine. Have your  
vehicle checked as soon as possible.  
is running, this indicates a  
powertrain or four-wheel drive  
fault. If it flashes when you are driving,  
immediately reduce the vehicle speed.  
Avoid heavy acceleration and deceleration,  
and have your vehicle checked as soon as  
STARTING AND STOPPING THE ENGINE INFORMATION MESSAGES  
Message  
Action  
Cranking Time Exceeded Displays if you exceed the starting time limit. You cannot  
attempt to start the engine for 15 minutes. If you cannot start  
the engine after 15 minutes passes, have your vehicle imme-  
diately checked.  
Starting System Fault  
Displays if you are unable to start your vehicle with a correctly  
coded key. The system has detected a fault that requires  
service. Have your vehicle checked as soon as possible.  
No Key Detected  
Displays if the system does not detect a valid passive key.  
241  
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM  
Starting and Stopping the Engine  
STARTING AND STOPPING THE  
ENGINE FREQUENTLY ASKED  
QUESTIONS - VEHICLES  
WITHOUT: PUSH BUTTON START  
E322354  
Why is the engine idle speed high when  
I am starting the engine?  
3. Turn the key to position III and wait  
The speed at which the engine idles  
immediately after starting is optimized  
to minimize vehicle emissions and  
maximize cabin comfort and fuel  
economy.  
until the engine stops cranking.  
4. Release the accelerator pedal.  
5. Turn the key to position III.  
STARTING AND STOPPING THE  
ENGINE FREQUENTLY ASKED  
QUESTIONS - VEHICLES WITH:  
PUSH BUTTON START  
Why does the engine not crank?  
You can only attempt to start the  
engine for a limited amount of time  
before the starting system temporarily  
disables. If you exceed the starting  
time limit, a message may appear and  
you cannot attempt to start the engine  
for at least 15 minutes.  
Why is the engine idle speed high when  
I am starting the engine?  
The speed at which the engine idles  
immediately after starting is optimized  
to minimize vehicle emissions and  
maximize cabin comfort and fuel  
economy.  
Why do I experience different driving  
characteristics?  
If you disconnect the battery, your  
vehicle may exhibit some unusual  
driving characteristics for  
Why does the engine not crank?  
You can only attempt to start the  
engine for a limited amount of time  
before the starting system temporarily  
disables. If you exceed the starting  
time limit, a message may appear and  
you cannot attempt to start the engine  
for at least 15 minutes.  
approximately 5 mi (8 km) after you  
reconnect it. This is because the engine  
management system must realign  
itself with the engine. You can  
disregard any unusual driving  
characteristics during this period.  
Why can I not start the engine?  
Why do I experience different driving  
If you cannot start the engine after 3  
attempts, wait 10 seconds and do the  
following:  
characteristics?  
If you disconnect the battery, your  
vehicle may exhibit some unusual  
driving characteristics for  
1. Fully press the brake pedal or the  
clutch pedal.  
approximately 5 mi (8 km) after you  
reconnect it. This is because the engine  
management system must realign  
itself with the engine. You can  
disregard any unusual driving  
Note: Make sure that the parking brake is  
applied.  
Note: Make sure that the transmission is in  
park (P) or neutral (N).  
characteristics during this period.  
2. Fully press the accelerator pedal and  
hold it there.  
242  
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM  
Starting and Stopping the Engine  
Why can I not start the engine?  
If you cannot start the engine after 3  
attempts, wait 10 seconds and do the  
following:  
1. Fully press the brake pedal or the  
clutch pedal.  
Note: Make sure that the parking brake is  
applied.  
Note: Make sure that the transmission is in  
park (P) or neutral (N).  
2. Fully press the accelerator pedal and  
hold it there.  
3. Press the push button ignition switch.  
Note: The engine cranks for a short period  
of time and then it stops.  
4. Release the accelerator pedal.  
E357998  
5. Press the push button ignition switch.  
Why does the system not detect a  
passive key?  
If the system does not detect a passive  
key and you are unable to start the  
engine, insert the passive key into the  
backup position and press the push  
button ignition switch to start the  
engine. See Accessing the Passive  
Key Backup Position (page 240).  
243  
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM