Capacities and Specifications -> Vehicle Identification Number for Your Ford Fiesta 4 Door 2023

Capacities and Specifications  
VEHICLE IDENTIFICATION PLATE  
B
C
D
E
F
G
H
A
I
E135662  
A
B
C
D
E
F
Model.  
Variant.  
Engine designation.  
Engine power and emission level.  
Vehicle identification number.  
Gross vehicle weight.  
G
H
I
Gross train weight.  
Maximum front axle weight.  
Maximum rear axle weight.  
The vehicle identification plate is within  
the right-hand door aperture.  
Note: The vehicle identification plate may  
vary to that shown.  
Note: Information on the vehicle  
identification plate is dependent upon  
market requirements.  
VEHICLE IDENTIFICATION  
NUMBER  
You can find the vehicle identification  
number at the following locations.  
302  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing  
Capacities and Specifications  
Stamped into the floor panel on the  
right-hand side, in front of the front seat.  
CAPACITIES AND  
SPECIFICATIONS - 1.0L  
ECOBOOST  
Use oil and fluid that meets the defined  
specification and viscosity grade.  
If you do not use oil and fluid that meets  
the defined specification and viscosity  
grade, it could result in:  
Component damage not covered by  
the vehicle Warranty.  
Longer engine cranking periods.  
Increased emission levels.  
Reduced engine performance.  
Reduced fuel economy.  
E163915  
On the left-hand side of the instrument  
panel.  
Reduced brake performance.  
E163913  
Engine  
Engine Oil  
Capacities  
Variant  
Including the Oil Filter  
Excluding the Oil Filter  
All.  
4.6 L (1.0 gal)  
4.4 L (1.0 gal)  
Note: The quantity of engine oil required to raise the indicated level on the dipstick from  
minimum to maximum is 1 L (0.2 gal).  
303  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing