Get Climate Control Guide for Ford Fiesta 4 Door 2023

Climate Control

Switching the Recirculated Air On

AIR VENTS

Center Air Vents

and Off

Note: The air currently in the passenger

compartment recirculates.

Switching the Air Conditioning On

and Off

E238347

Note: Under certain conditions, the air

conditioning compressor could continue to

operate after you switch air conditioning off.

Side Air Vents

Switching Maximum Defrost On

and Off

Turn the temperature control

clockwise past the highest

setting to maximize defrosting.

Note: The temperature control springs back

to the highest setting.

Note: When you switch maximum defrost

on, the heated windshield, heated rear

window and air conditioning turn on. The

blower motor is set to the highest speed.

Note: When you switch maximum defrost

off, the heated windshield and heated rear

window remain on.

E238348

MANUAL CLIMATE CONTROL

Switching Maximum Cooling On

and Off

Switching the Climate Control On

and Off

Turn the temperature control

counterclockwise past the

lowest setting to maximize

cooling.

Note: The temperature control springs back

to the lowest setting.

Note: When you switch maximum cooling

off, air conditioning remains on.

106

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Climate Control

Turn the temperature control

Setting the Blower Motor Speed

counterclockwise for cooler temperature

settings.

Turn the temperature control clockwise

for warmer temperature settings.

Note: Lights on the control illuminate to

indicate the blower motor speed.

Note: When you switch the blower motor

off, air conditioning turns off and the

windows could fog up.

AUTOMATIC CLIMATE

CONTROL

Switching the Climate Control On

Directing Air to the Windshield Air

Vents

and Off

Switching the Recirculated Air On

and Off

Directing Air to the Instrument

Panel Air Vents

Note: The air currently in the passenger

compartment recirculates.

Directing Air to the Footwell Air

Vents

Note: Recirculated air could turn off or be

prevented from turning on in all air flow

modes except maximum cooling to reduce

the risk of the windows fogging up. It could

also turn on and off when you direct air to

the instrument panel or footwell air vents

during hot weather to improve cooling

efficiency.

Setting the Temperature

Switching the Air Conditioning On

and Off

Note: Under certain conditions, the air

conditioning compressor could continue to

operate after you switch air conditioning off.

E244106

107

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Climate Control

Switching Maximum Defrost On

Switching Maximum Cooling On

and Off

Note: When you switch maximum defrost

on, the heated windshield, heated rear

window and air conditioning turn on. The

blower motor is set to the highest speed.

Note: When you switch maximum cooling

off, air conditioning remains on.

Switching Auto Mode On and Off

Note: When you switch maximum defrost

off, the heated windshield and heated rear

window remain on.

Press the button to switch auto

mode on. Repeatedly press the

button to adjust auto mode.

Note: When you switch auto mode on,

lights on the blower motor control do not

illuminate to indicate the blower motor

speed.

Adjust the blower motor control or air

distribution control to switch auto mode

off.

Auto Mode Indicator Status

Auto Mode Indicator

Status

Description

One indicator illumin-

ated.

•

The blower motor speed is reduced.

•

Use this setting to minimize the amount of noise from

the blower motor.

•

This setting increases the time taken to cool the

interior.

Two indicators illumin-

ated.

•

The blower motor speed is moderate.

Three indicators illumin-

ated.

The blower motor speed is increased.

•

Use this setting to reduce the time taken to cool the

interior.

This setting increases the amount of noise from the

blower motor.

108

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Climate Control

Turn the temperature control clockwise

Setting the Blower Motor Speed

for warmer temperature settings.

Note: You can adjust the temperature

between 15.5–29.5°C (60–85°F).

Note: Lights on the control illuminate to

indicate the blower motor speed.

HINTS ON CONTROLLING THE

INTERIOR CLIMATE -

Directing Air to the Windshield Air

Vents

VEHICLES WITH: AUTOMATIC

TEMPERATURE CONTROL

General Hints

Do not place objects under the front seats

as this may interfere with directing air to

the rear seats.

Directing Air to the Instrument

Panel Air Vents

Remove any snow, ice or leaves from the

air intake area at the base of the

windshield.

Note: You may feel a small amount of air

from the footwell air vents regardless of the

air distribution setting.

Directing Air to the Footwell Air

Vents

Note: To reduce humidity build-up inside

your vehicle, do not drive with the system

switched off or with recirculated air always

switched on.

Setting the Temperature

Note: Prolonged use of recirculated air may

cause the windows to fog up.

Note: Use air conditioning with recirculated

air to improve cooling performance and

efficiency.

Note: When you select automatic mode

and the outside temperature is low and the

engine is cold, air is directed to the

windshield and the outer instrument panel

air vents.

Note: When you select automatic mode

and the outside temperature and in-vehicle

temperature is high, the system temporarily

selects recirculated air to maximize cooling.

E244115

Note: When you select maximum defrost,

air conditioning turns on and air is directed

to the windshield air vents.

Turn the temperature control

counterclockwise for cooler temperature

settings.

109

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Climate Control

Recommended Settings for

Heating

HINTS ON CONTROLLING THE

INTERIOR CLIMATE -

•

Press AUTO.

Select the required temperature.

VEHICLES WITH: MANUAL

TEMPERATURE CONTROL

General Hints

Do not place objects under the front seats

as this may interfere with directing air to

the rear seats.

Remove any snow, ice or leaves from the

air intake area at the base of the

windshield.

Note: You may feel a small amount of air

from the footwell air vents regardless of the

air distribution setting.

Note: To reduce humidity build-up inside

your vehicle, do not drive with the system

switched off or with recirculated air always

switched on.

Note: To reduce fogging of the windshield

during humid weather conditions, direct air

to the windshield air vents.

Note: Adjusting the settings when your

vehicle interior is extremely hot or cold is

not necessary. The system automatically

adjusts to heat or cool the interior to your

selected temperature as quickly as possible.

For the system to function efficiently, the

instrument panel and side air vents should

be fully open.

Quickly Cooling the Interior

•

Press MAX A/C.

Note: To improve the time to reach a

comfortable temperature in hot weather,

drive with the windows open until you feel

cold air through the air vents.

Recommended Settings for

Cooling

•

Press AUTO.

Select the required temperature.

Note: Prolonged use of recirculated air may

cause the windows to fog up.

Defogging the Side Windows in

Note: Use air conditioning with recirculated

air to improve cooling performance and

efficiency.

Cold Weather

•

Select maximum defrost.

Quickly Heating the Interior

Defogging or Clearing the

Windshield of Thin Ice

•

Select the highest blower motor speed.

Select the highest temperature.

Direct air to the footwell air vents.

•

Select maximum defrost.

Recommended Settings for

Heating

•

Select a medium blower motor speed.

Select the required temperature.

Direct air to the footwell and

windshield air vents.

110

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Climate Control

Quickly Cooling the Interior

HEATED REAR WINDOW -

VEHICLES WITH: AUTOMATIC

•

Select maximum cooling.

TEMPERATURE CONTROL

Note: To improve the time to reach a

comfortable temperature in hot weather,

drive with the windows open until you feel

cold air through the air vents.

Press the button to clear the rear

window of thin ice and fog. The

heated rear window turns off

after a short period of time.

Recommended Settings for

Cooling

Note: Make sure the engine is on before

operating the heated windows.

•

Select a medium blower motor speed.

Select the required temperature.

Note: Do not use harsh chemicals, razor

blades or other sharp objects to clean or

remove decals from the inside of the heated

rear window. The vehicle warranty may not

cover damage to the heated rear window

grid lines.

Direct air to the instrument panel air

vents.

•

Press A/C.

Defogging the Side Windows in

Cold Weather

HEATED REAR WINDOW -

VEHICLES WITH: MANUAL

TEMPERATURE CONTROL

•

Select maximum defrost.

Defogging or Clearing the

Windshield of Thin Ice

Press the button to clear the rear

window of thin ice and fog. The

heated rear window turns off

•

Select maximum defrost.

after a short period of time.

HEATED WINDSHIELD

Note: Make sure the engine is on before

Press the button to clear the

operating the heated windows.

windshield of thin ice and fog.

The heated windshield turns off

Note: Do not use razor blades or other

sharp objects to clean or remove decals

from the inside of the heated rear window.

The vehicle Warranty may not cover

damage caused to the heated rear window

grid lines.

after a short period of time.

Note: Make sure that the engine is running

before switching the heated windshield on.

Note: The system does not operate if the

battery charge level is low.

HEATED EXTERIOR MIRRORS

When you switch the heated rear window

on, the heated exterior mirrors turn on.

Note: Do not remove ice from the mirrors

with a scraper or adjust the mirror glass

when it is frozen in place.

111

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Climate Control

Note: Do not clean the mirror housing or

Remotely Starting the Engine

glass with harsh abrasives, fuel or other

petroleum-based cleaning products. The

vehicle warranty may not cover damage

caused to the mirror housing or glass.

WARNING: To avoid exhaust

fumes, do not use remote start if your

vehicle is parked indoors or in areas that

are not well ventilated.

REMOTE START

About Remote Start

Use the FordPass app to start the engine.

Note: The direction indicators flash twice.

The system allows you to remotely start

Note: The parking lamps turn on when the

the engine using the FordPass app.

engine is running.

The system can also adjust the interior

temperature according to the settings that

you chose.

Note: The horn sounds if the system fails

to start.

Note: You must switch on the ignition

Note: All other vehicle systems remain off

before driving your vehicle.

when you have remotely started the engine.

Note: The vehicle remains secured when

you have remotely started the engine. A

valid key must be inside your vehicle to

switch the ignition on and drive your vehicle.

Remotely Stopping the Engine

Use the FordPass app to stop the engine.

Remote Start Settings

Remote Start Limitations

Remote start does not work if:

Use the information display to adjust the

remote start settings.

Note: You cannot adjust the climate control

settings when you have remotely started

the engine.

Note: When you switch the ignition on, the

climate control system returns to the last

used settings.

•

The alarm horn is sounding.

The hood is open.

The transmission is not in park (P).

Enabling Remote Start

1. Using the information display controls

Switching Auto On

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Remote start.

4. Switch System on or off.

Note: To use remote start, make sure that

the modem is enabled. See Connected

Vehicle (page 318).

1. Using the information display controls

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Remote start.

4. Select Climate control.

5. Switch Auto on.

Note: If you switch Auto on, the system

attempts to heat or cool the interior to 22°C

(72°F).

112

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Climate Control

Note: The heated windshield, heated rear

window, heated mirrors, heated seats and

heated steering wheel could turn on in cold

weather.

Switching Last settings On

1. Using the information display controls

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Remote start.

4. Select Climate control.

5. Switch Last settings on.

Note: If you switch Last settings on, the

system remembers the last used settings.

Switching the Heated Seats and the

Heated Steering Wheel Settings On

1. Using the information display controls

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Remote start.

4. Select Seats and steering.

5. Switch Auto on.

Note: If you switch the heated seats and

the heated steering wheel settings on, the

heated seats and heated steering wheel

turn on during cold weather.

Setting the Duration

You can set a duration for the engine to

run.

Note: Wait a few seconds before remotely

starting the engine after the engine stops

running.

1. Using the information display controls

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Remote start.

4. Select Duration.

113

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Climate Control for Your Ford Fiesta 4 Door 2023

Popular Manuals