Climate Control -> Remote Start for Your Ford Fiesta 4 Door 2023

Climate Control  
Note: Do not clean the mirror housing or  
Remotely Starting the Engine  
glass with harsh abrasives, fuel or other  
petroleum-based cleaning products. The  
vehicle warranty may not cover damage  
caused to the mirror housing or glass.  
WARNING: To avoid exhaust  
fumes, do not use remote start if your  
vehicle is parked indoors or in areas that  
are not well ventilated.  
REMOTE START  
About Remote Start  
Use the FordPass app to start the engine.  
Note: The direction indicators flash twice.  
The system allows you to remotely start  
Note: The parking lamps turn on when the  
the engine using the FordPass app.  
engine is running.  
The system can also adjust the interior  
temperature according to the settings that  
you chose.  
Note: The horn sounds if the system fails  
to start.  
Note: You must switch on the ignition  
Note: All other vehicle systems remain off  
before driving your vehicle.  
when you have remotely started the engine.  
Note: The vehicle remains secured when  
you have remotely started the engine. A  
valid key must be inside your vehicle to  
switch the ignition on and drive your vehicle.  
Remotely Stopping the Engine  
Use the FordPass app to stop the engine.  
Remote Start Settings  
Remote Start Limitations  
Remote start does not work if:  
Use the information display to adjust the  
remote start settings.  
Note: You cannot adjust the climate control  
settings when you have remotely started  
the engine.  
Note: When you switch the ignition on, the  
climate control system returns to the last  
used settings.  
The alarm horn is sounding.  
The hood is open.  
The transmission is not in park (P).  
Enabling Remote Start  
1. Using the information display controls  
Switching Auto On  
on the steering wheel, select Settings.  
2. Select Vehicle settings.  
3. Select Remote start.  
4. Switch System on or off.  
Note: To use remote start, make sure that  
the modem is enabled. See Connected  
Vehicle (page 318).  
1. Using the information display controls  
on the steering wheel, select Settings.  
2. Select Vehicle settings.  
3. Select Remote start.  
4. Select Climate control.  
5. Switch Auto on.  
Note: If you switch Auto on, the system  
attempts to heat or cool the interior to 22°C  
(72°F).  
112  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing  
Climate Control  
Note: The heated windshield, heated rear  
window, heated mirrors, heated seats and  
heated steering wheel could turn on in cold  
weather.  
Switching Last settings On  
1. Using the information display controls  
on the steering wheel, select Settings.  
2. Select Vehicle settings.  
3. Select Remote start.  
4. Select Climate control.  
5. Switch Last settings on.  
Note: If you switch Last settings on, the  
system remembers the last used settings.  
Switching the Heated Seats and the  
Heated Steering Wheel Settings On  
1. Using the information display controls  
on the steering wheel, select Settings.  
2. Select Vehicle settings.  
3. Select Remote start.  
4. Select Seats and steering.  
5. Switch Auto on.  
Note: If you switch the heated seats and  
the heated steering wheel settings on, the  
heated seats and heated steering wheel  
turn on during cold weather.  
Setting the Duration  
You can set a duration for the engine to  
run.  
Note: Wait a few seconds before remotely  
starting the engine after the engine stops  
running.  
1. Using the information display controls  
on the steering wheel, select Settings.  
2. Select Vehicle settings.  
3. Select Remote start.  
4. Select Duration.  
113  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing