Get Doors and Locks Guide for Ford Fiesta 4 Door 2023

Doors and Locks

Reprogramming the Unlocking

LOCKING AND UNLOCKING

Power Door Locks

Function

You can program the unlocking function

so that only the driver door unlocks.

The power door lock control is on the driver

door.

Press and hold the unlock and lock buttons

on the remote control simultaneously for

at least four seconds with the ignition off.

The direction indicators flash twice to

confirm the change.

Press the button to unlock all

E267112

doors.

Press the button to lock all

E267111

doors.

To return to the original unlocking function,

repeat the process.

You can also change between the

unlocking modes in the information

display.

Door Lock Indicator

An LED on the power door lock control

illuminates when you lock the door. It

remains on for up to five minutes after you

switch the ignition off.

Central Locking

Press the button to lock all

E267111

doors. One short flash of the

Door Lock Switch Inhibitor

direction indicators confirms that

your vehicle has locked.

When you electronically lock your vehicle,

the power door lock switch no longer

operates after 20 seconds. You must

unlock your vehicle with the remote

control, or switch the ignition on, to restore

function to these switches.

Note: The locking only operates if the front

doors are fully closed.

Double Locking the Doors

Remote Control

WARNING: Do not use double

locking when passengers or animals are

inside your vehicle. The doors cannot be

unlocked or opened from the inside when

double locked.

You can only use the remote control when

your vehicle is stationary.

Unlocking the Doors

Press the button to unlock all

Double locking is a theft protection feature

that prevents someone from opening the

doors from the inside. You can only double

lock the doors if all the doors are closed.

E267112

doors. One long flash of the

direction indicators confirms that

your vehicle has unlocked.

Note: You can unlock the driver door with

the key. Use the key if the remote control

does not operate.

Press the button twice within

E267111

three seconds. Three short

flashes of the direction

indicators confirms that your vehicle has

double locked.

Note: When you leave your vehicle

unattended for several weeks, the remote

control turns off. Unlocking and starting

your vehicle enables the remote control.

Note: If you unlock the liftgate, all other

doors return to the central locked state. You

must double lock your vehicle again.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks

Vehicles without Anti-Theft Alarm

Mislock

When you press the lock button on the

remote control once, the direction

indicators do not flash if:

This warns you that your vehicle has not

locked.

Vehicles with Anti-Theft Alarm

•

Any door or the liftgate is open.

When you press the lock button once, the

The horn sounds when you press the lock

button on the remote control again within

three seconds and a door is open.

direction indicators do not flash if:

•

Any door or the liftgate is open.

The hood is open.

Switching Mislock On or Off

If you switch mislock off, the horn does not

sound if you press the lock button on the

remote control when a door is open.

The horn sounds when you press the lock

button on the remote control again within

three seconds and a door is open.

To switch mislock on or off, use the information display controls on the steering

wheel to select the following:

Menu Item

Action

Settings

Press the menu button.

Press the OK button.

Vehicle settings

Locks

Mislock chirp

Autounlock

Auto Relock

Autounlock unlocks all the doors when all

The doors automatically relock if you do

not open a door within 45 seconds of

unlocking the doors with the remote

control. The door locks and the alarm

return to their previous state.

of the following occur:

•

The ignition is on, all the doors are

closed and your vehicle is moving at a

speed greater than 20 km/h (12 mph).

Your vehicle comes to a stop and you

switch the ignition off or to the

accessory position.

You open the driver door within 10

minutes of switching the ignition off or

to the accessory position.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks

Switching Autounlock On or Off

To switch autounlock on or off, use the information display controls on the steering

wheel to select the following:

Menu Item

Settings

Action

Press the menu button.

Press the OK button.

Vehicle settings

Locks

Auto unlock

3. Gently pull the lock cylinder cap toward

you to release it.

Locking and Unlocking the Doors

From Inside

Use the power door lock control on the

driver door to lock or unlock the doors from

inside.

4. Insert the key blade into the lock

cylinder.

Locking the Doors

Turn the top of the key toward the front of

Locking and Unlocking the Doors

your vehicle.

with the Key Blade

Double Locking the Doors

Removing the Lock Cylinder Cap

1. Release the key blade from the remote

control. See Remote Control (page

39).

Turn the top of the key toward the front of

your vehicle twice within three seconds.

Unlocking the Driver Door

Turn the top of the key toward the rear of

your vehicle.

Note: If the child safety locks are on and

you pull the interior handle, you only switch

off the emergency locking, not the child

safety lock. You can only open the doors

using the external door handle.

E243949

2. Fully insert the key blade into the key

slot.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks

Reinstalling the Lock Cylinder Cap

If the central locking function does not

operate, lock the doors individually using

the key in the position shown.

Left-Hand Side

Turn counterclockwise to lock.

Right-Hand Side

Turn clockwise to lock.

Unlocking the Doors

If the central locking function does not

operate, unlock the driver door and then

unlock all other doors individually by

pulling the interior door handles.

Note: When the doors have been unlocked

using this method, the doors must be locked

individually until the central locking function

has been repaired.

E244050

1. Place the cap over the lock cylinder.

2. Push the cap forward until it clicks into

place. Make sure you have properly

installed the cap by trying to move it

rearward.

Locking and Unlocking the Doors

Individually with the Key Blade

KEYLESS ENTRY

Principle of Operation

Locking the Doors

The system allows you to lock and unlock

your vehicle without taking the passive key

out of your pocket or purse.

E78276

E112203

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks

A valid passive key must be within one of

After locking the doors with the lock

sensor, there is a brief delay before you can

unlock your vehicle. This delay lets you

pull the handle to make sure your vehicle

is locked. When the delay period is over,

you can unlock the doors again, provided

the passive key is within the respective

detection range.

the three external detection ranges. These

are approximately 1.5 m (5 ft) from the

front door handles and the liftgate.

The system could not function if:

•

The passive key remains stationary for

about a minute.

•

The vehicle battery has no charge.

The passive key battery has no charge.

Unlocking the Doors

Unlock sensors are on the back of the

The passive key frequencies are

exterior front door handles.

jammed.

•

The passive key is too close to metal

objects or electronic devices, for

example keys or a cell phone.

If the system does not function, use the

remote control or the key blade to lock and

unlock your vehicle.

E248553

Touch the unlock sensor to unlock your

vehicle and disarm the alarm. The

Locking the Doors

direction indicators flash. Do not touch the

Lock sensors are on the top of the exterior

lock sensor on the top of the door handle.

front door handles.

Keep the door handle clean to make sure

the system correctly operates.

After unlocking the doors with the unlock

sensor, there is a brief delay before you can

lock your vehicle. When the delay period

is over, you can lock the doors again,

provided the passive key is within the

respective detection range.

E248554

Touch a lock sensor once to lock your

vehicle and arm the alarm. The direction

indicators flash.

Touch a lock sensor twice within three

seconds to double lock your vehicle and

arm the alarm. The direction indicators

flash. Do not touch the unlock sensor on

the back of the door handle.

Unlocking the Driver Door

You can program the unlocking function

so that only the driver door unlocks when

you touch the unlock sensor. See Locking

and Unlocking (page 54).

Keep the door handle clean to make sure

the system correctly operates.

Note: Your vehicle does not automatically

lock. If you do not touch a lock sensor your

vehicle remains unlocked.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks

If you program the unlocking function so

Deactivated Passive Keys

that only the driver door unlocks, the

following occurs:

The system deactivates passive keys left

inside your vehicle when you lock it. You

cannot switch the ignition on using a

deactivated passive key. Press the unlock

button on the remote control to reactivate

a passive key.

•

If you open the driver door first, all

other doors remain locked. You can

unlock all of the other doors from inside

your vehicle using the power door lock

control on the driver door. You can

unlock individual doors by pulling the

interior door handles on those doors.

Switching Keyless Entry On or Off

1. Using the information display controls

•

If you open the front passenger door

first, all of the other doors and the

liftgate unlock.

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Locks.

4. Select KeyFree.

Unlocking the Liftgate

E190028

Press the exterior release button hidden

above the license plate.

Note: A valid passive key must be within

the detection range.

Locking the Liftgate

The liftgate locks after you fully close it.

Smart Unlocks for Passive Keys

If you electronically lock your vehicle with

a rear door or the liftgate open, the system

searches for a passive key inside your

vehicle after you close the last door. If the

system detects a key, all doors unlock

indicating that a key is inside.

Note: Your vehicle locks if another passive

key is within the detection range after you

close the last door.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks for Your Ford Fiesta 4 Door 2023

Popular Manuals