Get Doors and Locks -> Keyless Entry Guide for Ford Fiesta 4 Door 2023

Doors and Locks

Reinstalling the Lock Cylinder Cap

If the central locking function does not

operate, lock the doors individually using

the key in the position shown.

Left-Hand Side

Turn counterclockwise to lock.

Right-Hand Side

Turn clockwise to lock.

Unlocking the Doors

If the central locking function does not

operate, unlock the driver door and then

unlock all other doors individually by

pulling the interior door handles.

Note: When the doors have been unlocked

using this method, the doors must be locked

individually until the central locking function

has been repaired.

E244050

1. Place the cap over the lock cylinder.

2. Push the cap forward until it clicks into

place. Make sure you have properly

installed the cap by trying to move it

rearward.

Locking and Unlocking the Doors

Individually with the Key Blade

KEYLESS ENTRY

Principle of Operation

Locking the Doors

The system allows you to lock and unlock

your vehicle without taking the passive key

out of your pocket or purse.

E78276

E112203

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks

A valid passive key must be within one of

After locking the doors with the lock

sensor, there is a brief delay before you can

unlock your vehicle. This delay lets you

pull the handle to make sure your vehicle

is locked. When the delay period is over,

you can unlock the doors again, provided

the passive key is within the respective

detection range.

the three external detection ranges. These

are approximately 1.5 m (5 ft) from the

front door handles and the liftgate.

The system could not function if:

•

The passive key remains stationary for

about a minute.

•

The vehicle battery has no charge.

The passive key battery has no charge.

Unlocking the Doors

Unlock sensors are on the back of the

The passive key frequencies are

exterior front door handles.

jammed.

•

The passive key is too close to metal

objects or electronic devices, for

example keys or a cell phone.

If the system does not function, use the

remote control or the key blade to lock and

unlock your vehicle.

E248553

Touch the unlock sensor to unlock your

vehicle and disarm the alarm. The

Locking the Doors

direction indicators flash. Do not touch the

Lock sensors are on the top of the exterior

lock sensor on the top of the door handle.

front door handles.

Keep the door handle clean to make sure

the system correctly operates.

After unlocking the doors with the unlock

sensor, there is a brief delay before you can

lock your vehicle. When the delay period

is over, you can lock the doors again,

provided the passive key is within the

respective detection range.

E248554

Touch a lock sensor once to lock your

vehicle and arm the alarm. The direction

indicators flash.

Touch a lock sensor twice within three

seconds to double lock your vehicle and

arm the alarm. The direction indicators

flash. Do not touch the unlock sensor on

the back of the door handle.

Unlocking the Driver Door

You can program the unlocking function

so that only the driver door unlocks when

you touch the unlock sensor. See Locking

and Unlocking (page 54).

Keep the door handle clean to make sure

the system correctly operates.

Note: Your vehicle does not automatically

lock. If you do not touch a lock sensor your

vehicle remains unlocked.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks

If you program the unlocking function so

Deactivated Passive Keys

that only the driver door unlocks, the

following occurs:

The system deactivates passive keys left

inside your vehicle when you lock it. You

cannot switch the ignition on using a

deactivated passive key. Press the unlock

button on the remote control to reactivate

a passive key.

•

If you open the driver door first, all

other doors remain locked. You can

unlock all of the other doors from inside

your vehicle using the power door lock

control on the driver door. You can

unlock individual doors by pulling the

interior door handles on those doors.

Switching Keyless Entry On or Off

1. Using the information display controls

•

If you open the front passenger door

first, all of the other doors and the

liftgate unlock.

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Locks.

4. Select KeyFree.

Unlocking the Liftgate

E190028

Press the exterior release button hidden

above the license plate.

Note: A valid passive key must be within

the detection range.

Locking the Liftgate

The liftgate locks after you fully close it.

Smart Unlocks for Passive Keys

If you electronically lock your vehicle with

a rear door or the liftgate open, the system

searches for a passive key inside your

vehicle after you close the last door. If the

system detects a key, all doors unlock

indicating that a key is inside.

Note: Your vehicle locks if another passive

key is within the detection range after you

close the last door.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Doors and Locks -> Keyless Entry for Your Ford Fiesta 4 Door 2023

Popular Manuals