Driving Aids
Traffic Sign Recognition System Messages
Message
Action
Traffic sign recognition
Reduced performance
See manual
The traffic sign data provided by the navigation system is
unavailable due to weak or no signal. Wait for a short period
of time for the signal to improve. If the message continues
to appear, have your vehicle checked as soon as possible.
Note: In cold and severe weather conditions
the system may not function. Rain, snow,
SPEED SIGN RECOGNITION
Principle of Operation
spray and large contrasts in lighting can all
prevent the sensor from correctly
functioning.
Note: If your vehicle has a suspension kit
not approved by us, the system may not
correctly function.
Note: Always fit Ford original parts when
replacing headlamp bulbs. Other bulbs may
reduce system performance.
The system turns on when you switch the
ignition on and you cannot switch the
system off.
WARNING: You are responsible for
controlling your vehicle at all times. The
system is designed to be an aid and does
not relieve you of your responsibility to
drive with due care and attention. Failure
to follow this instruction could result in
the loss of control of your vehicle,
personal injury or death.
WARNING: The system may not
operate properly if the sensor is blocked.
Keep the windshield free from
obstruction.
Using Speed Sign Recognition
Setting the System Speed Warning
You can set the system speed warning to
alert you when the vehicle speed exceeds
the speed limit recognized by the system
by a certain speed tolerance.
The system is designed to detect speed
limit signs to inform you of the current
speed limit. Detected speed signs appear
in the information display. The sensor is
behind the interior mirror.
Note: The system remembers the last
setting when you start your vehicle.
Note: Do not carry out windshield repairs
in the immediate area surrounding the
sensor.
Note: Speed sign data provided by the
navigation system contains information
integrated to the data carrier release.
1. Using the information display controls
on the steering wheel, select Driver
assist..
2. Select Traffic sign recognition.
3. Select Activate Traff. Sign Recog..
4. Select Activate speed warning.
5. Select Speed warning.
Note: The system may not detect all speed
signs and may incorrectly read signs.
6. Select Tolerance.
7. Select a setting and press the OK
button.
200
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
