Load Carrying -> Rear Under Floor Storage for Your Ford Fiesta 4 Door 2023

Load Carrying  
GENERAL INFORMATION  
REAR UNDER FLOOR  
STORAGE  
WARNING: Make sure that you  
properly secure objects in the luggage  
compartment. Failure to follow this  
instruction could result in personal injury  
in the event of a sudden stop or crash.  
Adjustable Load Floor  
The adjustable load floor can be held open  
or placed in the upper or lower positions  
within the luggage compartment.  
In the upper position, place it on top of the  
WARNING: Do not place objects  
on the luggage cover. Failure to follow  
this instruction could result in personal  
injury or death in the event of a sudden  
stop or crash.  
floor supports.  
WARNING: The appropriate  
loading capacity of your vehicle can be  
limited either by volume capacity (how  
much space is available) or by payload  
capacity (how much weight the vehicle  
should carry). Once you have reached  
the maximum payload of your vehicle,  
do not add more cargo, even if there is  
space available. Overloading or  
E270441  
In the lower position, slide it into the lower  
slot in the floor supports.  
improperly loading your vehicle can  
contribute to loss of vehicle control and  
vehicle rollover.  
WARNING:Make sure that you fully  
close the liftgate to prevent exhaust  
fumes from entering your vehicle. If you  
are unable to fully close the liftgate,  
open the air vents or the windows to  
allow fresh air to enter your vehicle.  
Failure to follow this instruction could  
result in personal injury or death.  
WARNING: Do not exceed the  
maximum front and rear axle loads for  
your vehicle.  
E270440  
To hold the load floor open, raise and slide  
into the angled slots in the floor supports  
behind rear seats.  
Note: When loading long objects into your  
vehicle, for example pipes, timber or  
furniture be careful not to damage the  
interior trim.  
209  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing