Get Maintenance -> Changing a Bulb Guide for Ford Fiesta 4 Door 2023

Maintenance

Reversing Lamp

CHANGING A BULB

WARNING: Switch the lamps and

the ignition off. Failure to do so could

result in serious personal injury.

WARNING: Lamps and associated

components become hot when in use.

Let them cool down before you remove

them.

3

Use the correct specification bulb. See

Bulb Specification Chart (page 311).

Headlamp

E236638

You may have to remove the headlamp

assembly prior to replacing a bulb. See

Removing a Headlamp (page 253).

1. Open the liftgate.

2. Carefully remove the cover.

Reflector Headlamp

3. Turn the wing nut counterclockwise

and remove it.

A

E249611

A

Daytime running lamp.

E238054

4. Remove the lamp.

5. Disconnect the electrical connector.

6. To install, reverse the removal

procedure.

255

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Maintenance

A

B

C

E236599

E249637

3. Turn the bulb holder counterclockwise

A

B

Front direction indicator.

and remove it.

High beam headlamp and

Note: You cannot separate the bulb from

daytime running lamp.

the bulb holder.

C

Low beam headlamp.

4. To install, reverse the removal

procedure.

Low Beam Headlamp

1. Carefully remove the cover.

Note: Do not touch the bulb glass.

Projector Headlamp

A

E249634

E249612

2. Press the clip up to release the bulb

holder.

A

Daytime running lamp.

3. Remove the bulb holder by pulling it

straight out.

A

B

C

4. Remove the bulb by pulling it straight

out.

5. To install, reverse the removal

procedure.

Note: Do not touch the bulb glass.

E236599

High Beam Headlamp and Daytime

Running Lamp

A

B

C

Front direction indicator.

High beam headlamp.

Low beam headlamp.

1. Carefully remove the cover.

2. Disconnect the electrical connector.

256

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Maintenance

Low Beam Headlamp

Daytime Running Lamp

1. Carefully remove the cover.

These lamps have LEDs.

2. Disconnect the electrical connector.

Note: We recommend that you have LEDs

changed by an authorized dealer.

Front Direction Indicator

E249647

3. Turn the bulb holder counterclockwise

and remove it.

E236630

4. Remove the bulb.

1. Turn the bulb holder counterclockwise

and remove it.

5. To install, reverse the removal

procedure.

2. Press the bulb in and turn the bulb

Note: Do not touch the bulb glass.

counterclockwise to remove it.

High Beam Headlamp

1. Carefully remove the cover.

3. To install, reverse the removal

procedure.

LED Headlamp

A

E249660

E272995

2. Press the clip up to release the bulb

holder.

A

Daytime running lamp.

3. Remove the bulb holder by pulling it

straight out.

These lamps have LEDs.

4. Remove the bulb by pulling it straight

out.

Note: We recommend that you have LEDs

changed by an authorized dealer.

5. To install, reverse the removal

procedure.

Note: Do not touch the bulb glass.

257

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Maintenance

Note: Do not touch the bulb glass.

Front Fog Lamp

ST, ST Line and Vignale

All Vehicles - Excluding: ST, ST Line

and Vignale

E159695

1. Use a suitable tool, for example a

screwdriver, to carefully remove the

wheel arch liner fasteners. Pull the

wheel liner back toward the tire to gain

access to the bulb.

E273066

1. Use a suitable tool, for example a

screwdriver, to carefully remove the

housing cover.

2. Disconnect the electrical connector.

2

E273068

2. Remove the screws and the lamp.

3. Disconnect the electrical connector.

4. Turn the bulb holder counterclockwise

and remove it.

Note: You cannot separate the bulb from

E236628

the bulb holder.

5. To install, reverse the removal

3. Turn the bulb holder counterclockwise

and remove it.

procedure.

Note: You cannot separate the bulb from

the bulb holder.

4. To install, reverse the removal

procedure.

258

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Maintenance

Side Direction Indicator

E283366

4. Use a suitable tool, for example a

E283364

screwdriver, to push the housing cover

through the access hole and remove it.

1. Use a suitable tool, for example a

screwdriver, to carefully lever the mirror

glass from the lower outer edge and

remove it.

2. Unplug the connector from the rear

side of the glass.

E283367

5. Use a T10 Torx screwdriver to remove

the lamp body.

E283365

3. Use a suitable tool, for example a

screwdriver, to carefully press the two

housing cover clips and release them.

259

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Maintenance

2. Press the bulb in and turn the bulb

counterclockwise to remove it.

3. To install, reverse the removal

procedure.

Note: High series have LEDs.

Note: We recommend that you have LEDs

changed by an authorized dealer.

Rear Direction Indicator

E283430

2

1

6. Turn the bulb holder clockwise and

remove it.

7. Pull the bulb straight out.

8. To install, reverse the removal

procedure.

Note: Make sure that both mirror housing

cover clips lock into position.

Note: We recommend that you have bulbs

E236635

changed by an authorized dealer.

1. Turn the bulb holder counterclockwise

and remove it.

Rear Lamp

Remove the rear lamp assembly prior to

replacing any bulb. See Removing a Rear

Lamp (page 254).

2. Press the bulb in and turn the bulb

counterclockwise to remove it.

3. To install, reverse the removal

procedure.

Rear Lamp and Stoplamp

Reversing Lamp

2

1

2

E236636

1. Turn the bulb holder counterclockwise

and remove it.

E236634

1. Turn the bulb holder counterclockwise

and remove it.

2. Press the bulb in and turn the bulb

counterclockwise to remove it.

260

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Maintenance

3. To install, reverse the removal

procedure.

License Plate Lamp

These lamps have LEDs.

Note: We recommend that you have LEDs

changed by an authorized dealer.

High Mounted Stoplamp

These lamps have LEDs.

Note: We recommend that you have LEDs

changed by an authorized dealer.

Rear Fog Lamp

Access the underside of your vehicle

behind the rear wheel.

2

E236637

1. Turn the bulb holder counterclockwise

and remove it.

2. Press the bulb in and turn the bulb

counterclockwise to remove it.

3. To install, reverse the removal

procedure.

261

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Maintenance -> Changing a Bulb for Your Ford Fiesta 4 Door 2023

Popular Manuals