Starting and Stopping the Engine -> Steering Wheel Lock-Vehicles Without-Push Button Start for Your Ford Fiesta 4 Door 2023

Starting and Stopping the Engine  
When you start the engine, it remains  
and close a door when the engine is  
running, the system searches for a valid  
passive key.  
running until you press the push button  
ignition switch, even if your vehicle does  
not detect a valid passive key. If you open  
Starting System Information Messages  
Message  
Action  
Full accessory power  
active  
Displays if you switch the ignition on and do not start the  
engine.  
Press brake to start  
Displays when you start the engine as a reminder to fully  
press the brake pedal.  
Press clutch to start  
Displays when you start the engine as a reminder to fully  
press the clutch pedal.  
Press brake and clutch to Displays when you start the engine as a reminder to fully  
start press the brake and clutch pedals.  
Cranking time exceeded Displays if the engine fails to start.  
No key detected  
Displays if the system does not detect a valid passive key.  
Starting system  
malfunction  
Displays if you are unable to start the engine with a correctly  
coded key. The system has detected a fault that requires  
service. Have your vehicle checked as soon as possible.  
Restart now or key is  
needed  
Displays for 10 seconds if you switch the engine off and the  
system does not detect a valid passive key. After 10 seconds,  
you can no longer start the engine if the system does not  
detect a valid passive key.  
Key Outside Vehicle Audible  
Warning  
STEERING WHEEL LOCK -  
VEHICLES WITHOUT: PUSH  
BUTTON START  
Sounds when you remove the passive key  
from your vehicle and the engine is running.  
WARNING: Always check that the  
steering is unlocked before attempting  
to move your vehicle.  
Locking the Steering Wheel  
1. Remove the key from the ignition.  
126  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing  
Starting and Stopping the Engine  
2. Slightly rotate the steering wheel to  
Note: You can only attempt to start the  
engine for a limited amount of time before  
the starting system temporarily disables. If  
you exceed the starting time limit, a  
message may appear and you cannot  
attempt to start the engine for at least 15  
minutes.  
engage the lock.  
Unlocking the Steering Wheel  
1. Insert the key in the ignition.  
2. Turn the key to position I.  
Note: You may have to slightly rotate the  
Before starting your vehicle, check the  
steering wheel to assist unlocking it.  
following:  
Make sure the headlamps and  
electrical accessories are off.  
Make sure the parking brake is on.  
STEERING WHEEL LOCK -  
VEHICLES WITH: PUSH  
BUTTON START  
Make sure the transmission is in park  
(P).  
Your vehicle has an electronically  
controlled steering wheel lock that  
automatically operates.  
The steering wheel will lock shortly after  
you have parked your vehicle and the  
passive key is outside it or when you lock  
your vehicle.  
Note: The steering wheel will not lock when  
the ignition is on or when your vehicle is  
moving.  
Vehicles with an Ignition Key  
1. Fully press the brake pedal.  
Note: Do not touch the accelerator pedal.  
2. Turn the key to position III.  
Note: The engine may continue cranking  
for up to 15 seconds or until it starts.  
Note: The engine takes longer to start at  
lower temperatures. It may crank for several  
seconds when very cold.  
Unlocking the Steering Wheel  
Vehicles with a Push Button  
The steering wheel unlocks when the  
system detects a valid passive key inside  
your vehicle. If the steering wheel relocks,  
switch the ignition on to unlock it.  
Ignition Switch  
See Push Button Ignition Switch (page  
124).  
Note: You may have to slightly rotate the  
Failure to Start  
steering wheel to assist unlocking it.  
If you cannot start the engine after 3  
attempts, wait 10 seconds and do the  
following:  
STARTING A GASOLINE  
ENGINE - AUTOMATIC  
TRANSMISSION  
The speed at which the engine idles  
immediately after starting is optimized to  
minimize vehicle emissions and maximize  
cabin comfort and fuel economy.  
Vehicles with an Ignition Key  
1. Fully press the brake pedal.  
2. Apply the parking brake.  
3. Shift into park (P).  
4. Fully press the accelerator pedal and  
hold it there.  
127  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing