Get Towing -> Tow Ball Guide for Ford Fiesta 4 Door 2023

Towing

The gross train weight stated on the

vehicle identification plate applies for road

gradients up to 12% and altitudes up to

1,000 m (3,281 ft) when towing a trailer. In

mountainous regions the engine

performance decreases due to lower air

density with increasing altitude. In high

altitude regions above 1,000 m (3,281 ft),

you should reduce the stipulated

maximum permitted gross train weight by

10% for every additional 1,000 m (3,281 ft).

Note: Not all vehicles are suitable or

approved to have a tow bar fitted. Ask an

authorized dealer for more information.

E71328

Detaching the Tow Ball Arm

TOWING A TRAILER - ST

WARNING: Always place the tow

ball arm in a secure location in your

vehicle so it does not become a projectile

in a crash. Failure to follow this

instruction could result in personal injury

or death.

WARNING: Your vehicle is not

approved for trailer towing. Never tow a

trailer with your vehicle.

TOW BALL

You must detach the tow ball arm when

not in use. We recommend that you

securely stow the tow ball arm in the

luggage compartment.

WARNING: Do not exceed the

lowest rating capacity for your vehicle or

trailer hitch. Overloading your vehicle or

trailer hitch can impair your vehicle

stability and handling. Failure to follow

this instruction could result in the loss of

control of your vehicle, personal injury or

death.

Do not use any tools to detach the tow ball

arm.

Never unlock or detach the tow ball arm

with a trailer attached.

WARNING: Do not cut, drill, weld

or modify the trailer hitch. Modifying the

trailer hitch could reduce the hitch rating.

Do not disassemble or repair the tow ball

arm.

E71329

1. Remove the protective cap.

213

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Towing

2. Insert the key and turn it

counterclockwise to unlock the

handwheel.

3. Hold the tow ball arm. Pull the

handwheel outward and turn it fully

clockwise until it clicks.

Note: The red mark on the handwheel must

align with the white dot on the tow ball arm.

4. Release the handwheel.

5. Pull the tow ball arm downward to

remove it.

6. Turn the trailer wiring connection

socket upward through 90° until it

engages in the end position.

E265433

7. Insert the blanking plug.

Attaching the Tow Ball Arm

Do not use any tools to attach the tow ball

arm.

E71330

Note: You can only attach the tow ball arm

if it is unlocked.

1. Remove the blanking plug and fully

insert the tow ball arm until it engages.

Note: Do not place your hand near the

handwheel.

Note: The green mark on the handwheel

must align with the white dot on the tow

ball arm.

214

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Towing

2. Insert the key and turn it clockwise to

lock the handwheel.

3. Fit the protective cap. Fully push it back

over the lock.

4. Turn the trailer wiring connection

socket downward through 90° until it

engages in the end position.

E71331

Check the following:

E71332

•

The green mark on the handwheel is

aligned with the white dot on the tow

ball arm.

The handwheel (A) is locked.

You have removed the key (B).

1. Remove the protective cap. Insert the

key and turn it counterclockwise to

unlock the handwheel.

2. Hold the tow ball arm. Pull the

handwheel outward and turn it

clockwise against the stop.

•

Note: If any of these cannot be met, do not

use the tow ball arm. Have your vehicle

checked as soon as possible.

3. Pull the tow ball arm downward to

remove it.

4. Release the handwheel.

5. Insert the blanking plug.

Quickly Detaching the Tow Ball

Arm

Never unlock or detach the tow ball arm

with a trailer attached.

Quickly Attaching the Tow Ball Arm

When the tow ball arm is quickly detached,

it can be quickly reattached.

1. Remove the blanking plug and fully

insert the tow ball arm until it engages.

Note: Do not place your hand near the

handwheel.

Note: The green mark on the handwheel

must align with the white dot on the tow

ball arm.

215

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Towing

2. Insert the key and turn it clockwise to

lock the handwheel.

WARNING: The brake and steering

assistance will not operate unless the

engine is running. Press the brake pedal

harder and be aware of increased

3. Fit the protective cap. Fully push it back

over the lock.

Tow Ball Arm Guidelines

stopping distances and heavier steering.

•

Replacement keys are available. We

recommend that you record the key

number on the lock cylinder.

Keep the system clean. Periodically

lubricate bearings, sliding surfaces and

locking balls with resin-free grease or

oil. Lubricate the lock with graphite.

Remove the trailer wiring plug from the

trailer wiring connection socket when

not in use. Failure to do so may result

in corrosion of the trailer wiring

connection socket. Clean the trailer

wiring connection socket regularly and

make sure the socket cover is fully

closed.

WARNING: If your vehicle has a

steering wheel lock make sure the

ignition is in the accessory or on position

when being towed.

•

WARNING: Too much tension on

a tow rope could cause damage to your

vehicle or the vehicle that is towing.

•

WARNING: When towing your

vehicle you must select neutral. Failure

to follow this warning could damage the

transmission and may lead to a crash or

injury.

Drive off slowly and smoothly without

jerking the vehicle you are towing.

You must only use the towing eye that was

delivered with your vehicle. See Towing

Points (page 224).

Tow ropes or rigid towing bars must be

placed on the same side. For example; right

hand rear towing point to right hand front

towing point.

You must use a tow rope or rigid towing

bar that is of the correct strength for the

weight of the towing vehicle and the

vehicle that is being towed.

If you use a high pressure water jet to

clean your vehicle, disconnect the

trailer wiring plug. Do not aim the water

jet directly at the trailer wiring

connection socket. We recommend

that you detach the tow ball arm

before washing your vehicle.

TOWING THE VEHICLE ON

FOUR WHEELS - MANUAL

TRANSMISSION

The weight of the vehicle that is being

towed must not exceed the weight of the

towing vehicle.

Do not exceed 50 km/h (31 mph). See

Towing the Vehicle on Four Wheels

(page 216).

WARNING: You must switch the

ignition on when your vehicle is being

towed. Failure to follow this warning

could seriously increase the risk of injury

or death.

216

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Towing -> Tow Ball for Your Ford Fiesta 4 Door 2023

Popular Manuals