Unique Driving Characteristics -> Auto-Start-Stop-Manual Transmission for Your Ford Fiesta 4 Door 2023

Unique Driving Characteristics  
The auto-start-stop indicator illuminates  
Switching the System On and Off  
green when the engine stops. It flashes  
amber and a message appears when you  
need to take an action.  
The system turns on when you  
switch the ignition on. Press the  
switch to switch it off.  
The auto-start stop indicator  
Note: OFF illuminates in the switch.  
illuminates grey with a strike out  
when the system is not available.  
Press the switch again to switch the  
system back on.  
Note: The system turns off when it detects  
a malfunction. If it remains off, have your  
vehicle checked as soon as possible.  
Information Messages  
Message  
Condition  
Action  
Auto StartStop Press brake The system needs to restart Press the brake pedal to  
to start engine  
the engine but requires your restart the engine.  
confirmation.  
Auto StartStop Shift to P  
Restart engine  
The system is not func-  
tioning.  
Shift into park (P) and  
restart the engine yourself.  
Principle of Operation  
Replacing the Battery  
Replace the battery with one of exactly  
the same specification for the system to  
function correctly.  
The system is designed to help reduce fuel  
consumption and CO2 emissions by  
stopping the engine when it is idling, for  
example at traffic lights. Your vehicle has  
an enhanced battery and starter motor  
that are designed for an increased number  
of engine starts.  
AUTO-START-STOP-MANUAL  
TRANSMISSION  
The system does not stop the engine under  
certain conditions, for example:  
If you have opened the driver door.  
WARNING: Apply the parking  
brake, shift into neutral, switch the  
ignition off and remove the key before  
you open the hood or have any service  
or repair work completed. If you do not  
switch the ignition off, the engine could  
restart at any time. Failure to follow this  
instruction could result in personal injury  
or death.  
If you have unfastened the driver  
seatbelt.  
If your vehicle is at high altitude.  
If you have switched the heated  
windshield on.  
If the engine is warming up.  
If the outside temperature is too low  
or too high.  
138  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing  
Unique Driving Characteristics  
If the battery charge is low or the  
Note: To obtain maximum benefit from the  
system, shift into neutral and release the  
clutch pedal whenever you stop your vehicle  
for more than three seconds.  
Note: The system provides stall recovery.  
To restart the engine after stalling, fully  
press the clutch pedal.  
battery temperature is outside the  
optimal operating range.  
To maintain the interior climate or  
reduce fogging.  
The system restarts the engine under  
certain conditions, for example:  
If you switch the heated windshield on.  
If you switch maximum defrost on.  
Switching the System On and Off  
The system turns on when you  
switch the ignition on. Press the  
switch to switch it off.  
If your vehicle starts to roll downhill in  
neutral.  
To maintain adequate brake  
assistance.  
Note: OFF illuminates in the switch.  
Press the switch again to switch the  
To maintain the interior climate or  
system back on.  
reduce fogging.  
The auto-start-stop indicator illuminates  
green when the engine stops. It flashes  
amber and a message appears when you  
need to take an action.  
Note: The blower motor speed could  
change when the system restarts the engine.  
Using Auto-Start-Stop  
Stopping the Engine  
1. Stop your vehicle.  
2. Shift into neutral.  
The auto-start stop indicator  
illuminates grey with a strike out  
when the system is not available.  
Note: The system turns off when it detects  
a malfunction. If it remains off, have your  
vehicle checked as soon as possible.  
3. Release the clutch pedal.  
Note: Power assist steering turns off when  
Auto-Start-Stop Warning  
the engine is off.  
Sounds when you open the driver door and  
Restarting the Engine  
Fully press the clutch pedal.  
the system has stopped the engine.  
Information Messages  
Message  
Condition  
Action  
Auto StartStop Press a The system needs to restart the  
Press the accelerator  
pedal, brake pedal or  
clutch pedal.  
pedal to start engine  
engine but requires your confirma-  
tion.  
Auto StartStop Manual The system is not functioning.  
restart required  
Restart the engine.  
Auto StartStop Select The system needs to restart the  
neutral to start engine engine but cannot because the  
transmission is in gear.  
Shift into neutral and  
restart the engine.  
139  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing  
Unique Driving Characteristics  
Replacing the Battery  
Replace the battery with one of exactly  
the same specification for the system to  
function correctly.  
ECOSELECT  
About EcoSelect  
EcoSelect is a drive mode that is designed  
to help you reduce fuel consumption. It  
changes the way that some vehicle  
systems operate to make your vehicle  
more efficient.  
When you drive with EcoSelect switched  
on, you could notice:  
Changes in engine behavior.  
Reduced acceleration performance.  
Reduced blower motor speed.  
Switching EcoSelect On and Off  
Press the button.  
Note: It remains on until you switch it off.  
EcoSelect Indicator  
Illuminates when you switch  
EcoSelect on.  
140  
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing