Get Windows Guide for Ford Fiesta 4 Door 2023

Windows

3. Lift and hold the switch until the

OPENING AND CLOSING THE

WINDOWS

window is fully closed. Keep the switch

held for a few seconds.

4. Press and hold the switch until the

window is fully open. Keep the switch

pressed for a few seconds.

5. Lift and hold the switch until the

window is fully closed. Keep the switch

held for a few seconds.

WARNING: Do not leave children

unattended in your vehicle and do not

let them play with the power windows.

Failure to follow this instruction could

result in personal injury.

Note: Repeat the procedure if the window

WARNING: When closing the

power windows, verify they are free of

obstruction and make sure that children

and pets are not in the proximity of the

window openings.

does not close when you use one-touch.

GLOBAL OPENING AND

CLOSING

Press the control to open the

window. Lift the control to close

the window.

What Is Global Opening and

Closing

You can use the remote control to operate

the windows with the ignition off.

Note: The power windows operate with the

ignition on, and for several minutes after you

switch the ignition off or until you open a

front door.

To reduce wind noise or pulsing noise when

one window is open, slightly open the

opposite window.

Using Global Opening

1. Press and release the unlock button on

the remote control.

2. Press and hold the unlock button on

the remote control.

One-Touch Open

3. Release the button when the windows

Fully press the control and release it. Press

and moonroof start to open.

again or lift it to stop the window.

Note: The moonroof stops in the vent

One-Touch Close

position.

Fully lift the control and release it. Press

Press the lock or the unlock button on the

again or lift it to stop the window.

remote control to stop global opening.

Note: You can use global opening for a

short period of time when you unlock your

vehicle using the remote control.

Resetting One-Touch Close

Carry out all steps within 30 seconds of

starting the sequence.

1. Close the window.

Switching Global Opening On and

Off

2. Press and hold the switch until the

window is fully open. Keep the switch

pressed for a few seconds.

1. Using the information display controls

on the steering wheel, select Settings.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Windows

2. Select Vehicle settings.

3. Select Windows.

Overriding Window Bounce-Back

4. Switch Global open on or off.

WARNING: If you override

bounce-back, the window does not

reverse if it detects an obstacle. Take

care when closing the windows to avoid

personal injury or damage to your

vehicle.

Using Global Closing

WARNING: When closing the

power windows, verify they are free of

obstruction and make sure that children

and pets are not in the proximity of the

window openings.

1. Close the window until it reaches the

point of resistance and let it reverse.

2. Lift the control within two seconds to

override bounce-back and close the

window. Bounce-back is now disabled

and you can close the window

manually.

1. Press and hold the lock button on the

remote control.

2. Release the button when the windows

and moonroof start to close.

Note: The window goes past the point of

resistance and you can fully close it.

Press the lock or the unlock button on the

remote control to stop global closing.

Note: Bounce-back is on during global

closing. See What Is Window

Bounce-Back (page 80).

Note: If the window does not close, have

your vehicle checked as soon as possible.

Resetting Window Bounce-Back

Switching Global Closing On and

Off

WARNING:Bounce-back is off until

you reset the memory. Take care when

closing the windows to avoid personal

injury or damage to your vehicle.

1. Using the information display controls

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Windows.

4. Switch Global close on or off.

If you have disconnected the battery, you

must reset the bounce-back memory

separately for each window.

Carry out all steps within 30 seconds of

WINDOW BOUNCE-BACK

What Is Window Bounce-Back

starting the sequence.

1. Close the window.

2. Press and hold the switch until the

window is fully open. Keep the switch

pressed for a few seconds.

3. Lift and hold the switch until the

window is fully closed. Keep the switch

held for a few seconds.

The window stops and reverses if it detects

an obstruction when closing.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Windows

4. Press and hold the switch until the

window is fully open. Keep the switch

pressed for a few seconds.

5. Lift and hold the switch until the

window is fully closed. Keep the switch

held for a few seconds.

Note: Repeat the procedure if the window

does not close when you use one-touch.

LOCKING THE REAR WINDOW

CONTROLS

Press the control to lock or

unlock the rear window controls.

It illuminates when you lock the

rear window controls.

Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing

Windows for Your Ford Fiesta 4 Door 2023

Popular Manuals