Automatic Transmission for Your Ford Focus 4 Door 2023

Automatic Transmission  
Neutral (N)  
AUTOMATIC TRANSMISSION  
PRECAUTIONS  
In neutral (N), power is not transmitted to  
the driven wheels but the transmission is  
not locked. In neutral (N) your vehicle has  
the ability to roll freely. You can start the  
engine with the transmission in this  
position.  
WARNING: Do not apply the brake  
pedal and accelerator pedal  
simultaneously. Applying both pedals  
simultaneously for more than a few  
seconds will limit engine performance,  
which may result in difficulty maintaining  
speed in traffic and could lead to serious  
injury.  
Drive (D)  
Drive (D) is the normal position for driving.  
Low (L) - Vehicles Without: Paddle  
Shifters  
Low (L) provides maximum engine braking.  
WARNING: When your vehicle is  
stationary, keep the brake pedal fully  
pressed when shifting gears. Failure to  
follow this instruction could result in  
personal injury, death or property  
damage.  
Note: In order to activate low (L) your  
vehicle must be in drive (D).  
Note: You can shift into low (L) at any  
WARNING: Apply the parking  
brake, shift into park (P), switch the  
ignition off and remove the key before  
you leave your vehicle. Failure to follow  
this instruction could result in personal  
injury or death.  
vehicle speed.  
Manual (M) - Vehicles With:  
Paddle Shifters  
Manual (M) provides permanent manual  
control of the gear selection.  
AUTOMATIC TRANSMISSION  
POSITIONS  
Note: In order to activate manual (M) your  
vehicle must be in drive (D).  
Note: You can shift into manual (M) at any  
vehicle speed.  
Park (P)  
In park (P), power is not transmitted to the  
driven wheels and the transmission is  
locked. You can start the engine with the  
transmission in this position.  
AUTOMATIC TRANSMISSION  
POSITION INDICATORS -  
VEHICLES WITHOUT: PADDLE  
SHIFTERS  
Shift into park (P) only when your vehicle  
is stationary.  
Reverse (R)  
The instrument cluster displays the current  
position.  
Shift into reverse (R) only when your  
vehicle is stationary and the engine is at  
idle speed.  
237  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Automatic Transmission  
Manually Shifting Gears in Drive  
AUTOMATIC TRANSMISSION  
(D)  
POSITION INDICATORS -  
VEHICLES WITH: PADDLE  
SHIFTERS  
The instrument cluster displays the current  
position.  
E144821  
Pull any paddle to switch the feature on.  
AUTOMATIC TRANSMISSION  
SHIFT INDICATORS -  
VEHICLES WITH: PADDLE  
SHIFTERS  
Pull the right paddle (+) to upshift.  
Pull the left paddle () to downshift.  
Note: The feature turns off if neither paddle  
is pulled within a short period of time.  
Shift indicators illuminate when  
Note: Hold the right paddle for a few  
shifting gear is recommended.  
seconds to turn off the feature manually.  
Manually Shifting Gears in Manual  
(M)  
MANUALLY SHIFTING GEARS  
- VEHICLES WITH: PADDLE  
SHIFTERS  
ShiftingUsingthePaddleShifters  
E144821  
You can only manually shift gears in drive  
(D) or manual (M).  
Pull the right paddle (+) to upshift.  
Pull the left paddle () to downshift.  
Shift into drive (D) to switch the feature  
off.  
238  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Automatic Transmission  
Note: Your vehicle is free to roll.  
STAY IN NEUTRAL MODE - 8-  
SPEED AUTOMATIC  
TRANSMISSION  
7. Switch your vehicle off.  
Note: Do not tow your vehicle in this mode.  
Entering Stay in Neutral Mode -  
What Is Stay in Neutral Mode  
Failure to Start  
This mode keeps your vehicle in neutral  
Use this feature to move the transmission  
selector out of park (P) if you cannot start  
the engine.  
(N) when you switch your vehicle off.  
Use this mode if you exit your vehicle or  
switch your vehicle off at an automatic car  
wash.  
Note: This feature does not function if the  
vehicle battery charge is low.  
Note: Do not tow your vehicle in this mode.  
1. Power your vehicle on without your  
foot on the brake pedal.  
Note: Automatic Return to Park is delayed  
2. Fully press the brake pedal. Keep the  
brake pedal fully pressed.  
when your vehicle is in this mode.  
3. Fully press the accelerator pedal. Keep  
Stay in Neutral Mode Precautions  
the accelerator pedal fully pressed.  
Do not tow your vehicle in this mode.  
Failure to follow these instructions could  
result in vehicle damage not covered by  
the vehicle warranty.  
Your vehicle could shift to park (P) after  
30 minutes, or when the vehicle battery  
charge level is low. Prolonged use of this  
mode can cause the vehicle battery to run  
out of charge.  
4. Shift from park (P) to neutral (N).  
5. Press the manual (M) or low (L)  
button.  
6. Attempt to start your vehicle.  
Note: A confirmation message appears  
when your vehicle enters stay in neutral  
mode and the neutral (N) button on the  
transmission selector flashes.  
7. Release the accelerator and brake  
Entering Stay in Neutral Mode  
1. Power your vehicle on.  
2. Bring your vehicle to a complete stop.  
3. Press and hold the brake pedal.  
4. Shift into neutral (N).  
pedals.  
Note: Your vehicle is free to roll.  
8. Switch your vehicle off.  
Note: The transmission returns to park (P)  
if the vehicle battery charge is low.  
Note: An instructional message appears.  
Exiting Stay in Neutral Mode  
1. Press the brake pedal.  
5. Press the low (L) or manual (M)  
button.  
2. Shift into park (P), or power the vehicle  
Note: A confirmation message appears  
when your vehicle enters stay in neutral  
mode and the neutral (N) button on the  
transmission selector flashes.  
on and shift to drive (D) or reverse (R).  
6. Release the brake pedal.  
239  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Automatic Transmission  
AUTOMATIC RETURN TO  
BRAKE SHIFT INTERLOCK - 6-  
SPEED AUTOMATIC  
PARK (P) - 8-SPEED  
AUTOMATIC TRANSMISSION  
TRANSMISSION  
What Is Automatic Return to Park  
What Is Brake Shift Interlock  
(P)  
Brake shift interlock prevents you from  
shifting out of park (P) when you have  
switched the ignition on and not pressed  
the brake pedal.  
Your vehicle shifts into park (P) if you  
attempt to exit your vehicle without the  
transmission in park (P).  
Brake Shift Interlock Precautions  
How Does Automatic Return to  
Park (P) Work  
Your vehicle shifts to park (P) when your  
vehicle is stationary and any of the  
following occur:  
WARNING: Do not drive your  
vehicle until you verify that the  
stoplamps are working.  
You switch the vehicle off.  
WARNING: When doing this  
procedure, you need to take the  
transmission out of park (P) which  
means your vehicle can roll freely. To  
avoid unwanted vehicle movement,  
always fully apply the parking brake prior  
to doing this procedure. Use wheels  
chocks if appropriate.  
You open the driver door with the driver  
seatbelt unfastened.  
You unfasten the driver seatbelt with  
the driver door open.  
Note: Do not use Automatic Return to Park  
when your vehicle is moving, except in an  
emergency.  
WARNING: If the parking brake is  
fully released, but the brake warning  
lamp remains illuminated, the brakes  
may not be working properly. Have your  
vehicle checked as soon as possible.  
Automatic Return to Park (P)  
Limitations  
Automatic return to park may not work if  
the door ajar switch is malfunctioning.  
See an authorized dealer if any of the  
following occur:  
In the event of an electrical malfunction,  
it is possible that a fuse has blown or the  
stoplamps are not working. See Fuse  
Specification Chart (page 397).  
If the vehicle battery has no charge, jump  
start your vehicle. See Jump Starting the  
Vehicle (page 390).  
Door ajar indicator does not illuminate  
with the driver door open.  
Door ajar indicator illuminates with the  
driver door closed.  
Transmission not in park message  
appears with the driver door closed,  
after you shift out of park (P).  
240  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Automatic Transmission  
Using Brake Shift Interlock  
Use the brake shift interlock lever to move  
the selector lever out of park (P) if you  
cannot start the engine.  
E269821  
2. Locate the access hole.  
3. Using a flat-bladed screwdriver, push  
the brake shift interlock lever toward  
the front of your vehicle and hold it  
there.  
E269819  
1. Remove the panel.  
4. Move the selector lever from park (P)  
to neutral (N).  
5. Install the panel.  
6. Press the brake pedal, start the engine  
and release the parking brake.  
AUTOMATIC TRANSMISSION  
AUDIBLE WARNINGS  
Transmission Not in Park (P)  
Audible Warning  
Sounds when you open the driver door and  
you have not moved the transmission  
selector to park (P).  
241  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Automatic Transmission  
AUTOMATIC TRANSMISSION TROUBLESHOOTING  
Automatic Transmission Information Messages  
Message  
Description  
Transmission malfunc-  
tion Service now  
The system has detected a fault that requires service. Have  
your vehicle checked as soon as possible.  
Transmission limited  
function See manual  
The transmission has limited functionality. The system has  
detected a fault that requires service. Have your vehicle  
checked as soon as possible.  
Transmission too hot  
Press brake  
The transmission is overheating and needs to cool. Stop your  
vehicle as soon as it is safe to do so, leave the engine running  
and allow the transmission to cool. Wait until the message  
disappears.  
Transmission over-  
heating Stop safely  
Transmission not in Park Displays as a reminder to shift into park (P).  
Shift malfunction  
Displays when there is a system fault and the park brake  
Confirm park brake Apply needs to be depressed before exiting the vehicle. See your  
before exiting the vehicle authorized dealer.  
Select M to confirm Stay Displays when you shift into neutral (N).  
in neutral mode  
Select L to confirm Stay Displays when you shift into neutral (N).  
in neutral mode  
Stay in neutral mode  
engaged  
Displays to confirm that your vehicle has entered Stay in  
Neutral Mode.  
242  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing