Cruise Control
Press the toggle button upward
or downward to set the current
speed.
PRINCIPLE OF OPERATION
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 30 km/h (20 mph).
Take your foot off the accelerator pedal.
Note: The set speed appears in the
information display.
USING CRUISE CONTROL
Changing the Set Speed
WARNING: Do not use cruise
control on winding roads, in heavy traffic
or when the road surface is slippery. This
could result in loss of vehicle control,
serious injury or death.
Press the toggle button upward
to increase the set speed.
Press the toggle button
downward to decrease the set
speed.
WARNING: When you are going
downhill, your vehicle speed could
increase above the set speed. The
system does not apply the brakes.
You can adjust the set speed in small or
large increments. Press the toggle button
upward or downward once to adjust the
set speed in small increments. Press and
hold the toggle button upward or
downward to adjust the set speed in large
increments.
Note: If you accelerate by pressing the
accelerator pedal, the set speed does not
change. When you release the accelerator
pedal, your vehicle returns to the speed that
you previously set.
The cruise controls are on the steering
wheel.
Switching Cruise Control On
Press the button.
E71340
Switching Cruise Control Off
Canceling the Set Speed
Press the button when the
Press the button, or press the
brake pedal to cancel the set
speed.
system is in standby mode. The
E71340
system also turns off when you
switch the ignition off.
Note: The set speed is stored.
Note: The system cancels if the vehicle
speed drops below 16 km/h (10 mph) under
the set speed when driving uphill.
Note: The set speed erases when you
switch the system off.
Setting the Cruise Speed
Drive to the required speed.
Resuming the Set Speed
Press to resume the set speed.
272
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
