Keyless Entry for Your Ford Focus 4 Door 2023

Keyless Entry  
4. Switch KeyFree on and off.  
KEYLESSENTRYLIMITATIONS  
Switching Keyless Entry On and  
Off - Vehicles With: 12.3 Inch  
Instrument Cluster Display Screen  
1. Press the menu button on the steering  
wheel to enter the information display  
main menu.  
2. Select Settings.  
3. Select Vehicle.  
4. Select Locks.  
5. Select KeyFree.  
6. Press and hold the OK button until a  
confirmation message appears in the  
information display.  
E78276  
A valid passive key must be within one of  
the three external detection ranges. These  
are approximately 1.5 m (5 ft) from the  
front door handles and the liftgate.  
Reprogramming the Unlocking  
Function - Vehicles With: 4.2 Inch  
Instrument Cluster Display Screen  
You can program the unlocking function  
so that only the driver door unlocks when  
you touch the unlock sensor on the exterior  
door handle.  
If you program the unlocking function so  
that only the driver door unlocks, the  
following occurs:  
The system could not function if:  
The passive key remains stationary for  
about a minute.  
The vehicle battery has no charge.  
The passive key battery has no charge.  
The passive key frequencies are  
jammed.  
If you open the driver door first, all  
other doors remain locked. You can  
unlock all of the other doors from inside  
your vehicle using the power door lock  
control on the driver door. You can  
unlock individual doors by pulling the  
interior door handles on those doors.  
The passive key is too close to metal  
objects or electronic devices, for  
example keys or a cell phone.  
KEYLESS ENTRY SETTINGS  
If you open any other door first, all  
Switching Keyless Entry On and  
Off - Vehicles With: 4.2 Inch  
other doors and the liftgate unlock.  
Instrument Cluster Display Screen  
You can change between the unlocking  
modes in the information display.  
1. Using the information display controls  
1. Using the information display controls  
on the steering wheel, select Settings.  
on the steering wheel, select Settings.  
2. Select Vehicle settings.  
3. Select Locks.  
2. Select Vehicle settings.  
3. Select Locks.  
83  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
 
Keyless Entry  
4. Select Unlocking.  
5. Select All doors or Driver's door.  
Reprogramming the Unlocking  
Function - Vehicles With: 12.3 Inch  
Instrument Cluster Display Screen  
You can program the unlocking function  
so that only the driver door unlocks when  
you touch the unlock sensor on the exterior  
door handle.  
If you program the unlocking function so  
that only the driver door unlocks, the  
following occurs:  
E248553  
Touch the unlock sensor to unlock your  
vehicle and disarm the alarm. The  
direction indicators flash. Do not touch the  
lock sensor on the top of the door handle.  
Keep the door handle clean to make sure  
the system correctly operates.  
After unlocking the doors with the unlock  
sensor, there is a brief delay before you can  
lock your vehicle. When the delay period  
is over, you can lock the doors again,  
provided the passive key is within the  
respective detection range.  
If you open the driver door first, all  
other doors remain locked. You can  
unlock all of the other doors from inside  
your vehicle using the power door lock  
control on the driver door. You can  
unlock individual doors by pulling the  
interior door handles on those doors.  
Locking the Doors  
Lock sensors are on the top of the exterior  
front door handles.  
If you open any other door first, all  
other doors and the liftgate unlock.  
You can change between the unlocking  
modes in the information display.  
1. Press the menu button on the steering  
wheel to enter the information display  
main menu.  
E248554  
2. Select Settings.  
Touch a lock sensor once to lock your  
vehicle and arm the alarm. The direction  
indicators flash.  
3. Select Vehicle.  
4. Select Locks.  
5. Select Unlocking.  
6. Select All doors or Driver's door.  
Keep the door handle clean to make sure  
the system correctly operates.  
Note: Your vehicle does not automatically  
lock. If you do not touch a lock sensor your  
vehicle remains unlocked.  
LOCKING AND UNLOCKING  
THE DOORS USING KEYLESS  
ENTRY  
Unlocking the Doors  
Unlock sensors are on the back of the  
exterior front door handles.  
84  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Keyless Entry  
After locking the doors with the lock  
KEYLESS ENTRY  
sensor, there is a brief delay before you can  
unlock your vehicle. This delay lets you  
pull the handle to make sure your vehicle  
is locked. When the delay period is over,  
you can unlock the doors again, provided  
the passive key is within the respective  
detection range.  
TROUBLESHOOTING  
Keyless Entry Frequently Asked  
Questions  
Why does the keyless entry system not  
function?  
Double Locking the Doors  
If the system does not function it may  
be limited. See Keyless Entry  
Limitations (page 83). If the system  
still does not function use the remote  
Touch a lock sensor twice within three  
seconds to double lock your vehicle and  
arm the alarm. The direction indicators  
flash. Do not touch the unlock sensor on  
the back of the door handle.  
Why can I not lock my vehicle?  
If you electronically lock your vehicle  
with a rear door or the liftgate open,  
the system searches for a passive key  
inside your vehicle after you close the  
last door. If the system detects a key,  
all doors unlock indicating that a key  
is inside. Your vehicle locks if another  
passive key is within the detection  
range after you close the last door.  
LOCKING AND UNLOCKING  
THE LIFTGATE USING  
KEYLESS ENTRY  
Unlocking the Liftgate  
Why does the passive key not work?  
The system deactivates passive keys  
left inside your vehicle when you lock  
it. You cannot switch the ignition on  
using a deactivated passive key. Press  
the unlock button on the remote  
control to reactivate a passive key.  
E190028  
Press the exterior release button hidden  
above the license plate.  
Note: A valid passive key must be within  
the detection range.  
Locking the Liftgate  
The liftgate locks after you fully close it.  
85  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing