Keys and Remote Controls
CHANGING THE REMOTE
CONTROL BATTERY -
VEHICLESWITH:REMOTEFLIP
KEY
WARNING: Keep batteries away
from children to prevent ingestion.
Failure to follow this instruction could
result in personal injury or death. If
ingested, immediately seek medical
attention.
4
WARNING: If the battery
compartment does not securely close,
stop using the remote control and
replace it as soon as possible. In the
meantime, keep the remote control away
from children. Failure to follow this
instruction could result in personal injury
or death.
E119190
4. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
5
Make sure that you dispose of
old batteries in an
E107998
environmentally friendly way.
Seek advice from your local authority
about recycling old batteries.
The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.
E125860
5. Carefully remove the battery with the
screwdriver.
1. Press the key release button.
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
6. Insert a new battery with the + facing
downward.
Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
7. Assemble the two halves of the remote
control.
8. Reinstall the key blade.
E302822
65
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
