Maintenance -> Changing a Bulb for Your Ford Focus 4 Door 2023

Maintenance  
Headlamp  
You may have to remove the headlamp  
assembly prior to replacing a bulb. See  
Removing a Headlamp (page 431).  
Halogen Headlamp  
4. Disconnect the electrical connector.  
A
A
Daytime running lamps.  
B
A
C
5. Remove the lamp.  
6. To install, reverse the removal  
procedure.  
CHANGING A BULB  
E264499  
A
B
C
Headlamp low beam.  
Headlamp high beam.  
Front direction indicator.  
WARNING: Switch the lamps and  
the ignition off. Failure to do so could  
result in serious personal injury.  
WARNING: Lamps and associated  
components become hot when in use.  
Let them cool down before you remove  
them.  
Headlamp Low Beam  
1. Turn the cover counterclockwise and  
remove it.  
Use the correct specification bulb. See  
Bulb Specification Chart (page 489).  
434  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Maintenance  
3. Remove the bulb by pulling it straight  
out.  
4. To install, reverse the removal  
procedure.  
Note: Do not touch the bulb glass.  
Daytime Running Lamp  
These lamps have LEDs.  
Note: We recommend that you have LEDs  
changed by an authorized dealer.  
3
Front Direction Indicator  
2
1. Turn the cover counterclockwise and  
remove it.  
2. Press the clip to release the bulb  
holder.  
3. Remove the bulb by pulling it straight  
out.  
4. To install, reverse the removal  
procedure.  
Note: Do not touch the bulb glass.  
Headlamp High Beam  
1. Turn the cover counterclockwise and  
remove it.  
2
2. Turn the bulb holder counterclockwise  
and remove it.  
3. Press the bulb in and turn the bulb  
counterclockwise to remove it.  
4. To install, reverse the removal  
procedure.  
3
2. Press the clip to release the bulb  
holder.  
435  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Maintenance  
LED Headlamp  
Note: You cannot separate the bulb from  
the bulb holder.  
3. To install, reverse the removal  
procedure.  
Note: Do not touch the bulb glass.  
Note: Front fog lamps are also available as  
LED lamps.  
Note: We recommend that you have LEDs  
changed by an authorized dealer.  
Rear Lamp  
Remove the rear lamp assembly prior to  
replacing any bulb. See Removing a Rear  
Lamp (page 432). See Removing a Rear  
Lamp (page 433).  
A
A
Daytime running lamps.  
These lamps have LEDs.  
Note: We recommend that you have LEDs  
changed by an authorized dealer.  
Front Fog Lamp  
1. Disconnect the electrical connector.  
A
B
C
A
B
C
Stoplamp.  
Rear direction indicator.  
Rear lamp.  
E236628  
2. Turn the bulb holder counterclockwise  
to remove the bulb.  
436  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Maintenance  
Stoplamp  
Rear Lamp  
2
2
1
1
E3
1. Turn the bulb holder counterclockwise  
and remove it.  
2. Press the bulb in and turn the bulb  
counterclockwise to remove it.  
1. Turn the bulb holder counterclockwise  
and remove it.  
3. To install, reverse the removal  
procedure.  
2. Press the bulb in and turn the bulb  
counterclockwise to remove it.  
Rear Direction Indicator  
3. To install, reverse the removal  
procedure.  
Note: Rear lamps are also available as LED  
2
1
lamps.  
Note: We recommend that you have LEDs  
changed by an authorized dealer.  
Reversing Lamp and Rear Fog Lamp  
These lamps have LEDs.  
Note: We recommend that you have LEDs  
changed by an authorized dealer.  
License Plate Lamp  
These lamps have LEDs.  
1. Turn the bulb holder counterclockwise  
and remove it.  
Note: We recommend that you have LEDs  
2. Press the bulb in and turn the bulb  
changed by an authorized dealer.  
counterclockwise to remove it.  
3. To install, reverse the removal  
procedure.  
High Mounted Stoplamp  
These lamps have LEDs.  
Note: We recommend that you have LEDs  
changed by an authorized dealer.  
437  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing