Maintenance
Note: The oil consumption of new engines
ENGINE OIL DIPSTICK - 2.3L
reaches its normal level after approximately
5,000 km (3,000 mi).
ECOBOOST™
Adding Engine Oil
WARNING: Do not add engine oil
when the engine is hot. Failure to follow
this instruction could result in personal
injury.
WARNING: Do not remove the filler
cap when the engine is running.
Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that the
vehicle warranty may not cover.
E250320
A
B
C
Minimum.
Nominal.
Maximum.
1. Clean the area surrounding the engine
oil filler cap before you remove it.
2. Remove the engine oil filler cap.
3. Add engine oil that meets our
ENGINE OIL CHECK
specifications.
1. Make sure that your vehicle is on level
4. Reinstall the engine oil filler cap. Turn
it clockwise until you feel a strong
resistance.
Note: Do not add oil further than the
maximum mark. Oil levels above the
maximum mark may cause engine damage.
ground.
2. Check the oil level before starting the
engine, or switch the engine off after
warm up and wait 10 minutes for the
oil to drain into the oil pan.
3. Remove the dipstick and wipe it with
Note: Immediately soak up any oil spillage
a clean, lint-free cloth.
with an absorbent cloth.
4. Reinstall the dipstick and make sure it
is fully seated.
Engine Oil Pressure Warning Lamp
5. Remove the dipstick again to check the
oil level.
WARNING: If it illuminates when
you are driving do not continue your
journey, even if the oil level is correct.
Have your vehicle checked.
Note: If the oil level is between the
maximum and minimum marks, the oil level
is acceptable. Do not add oil.
6. If the oil level is at the minimum mark,
It illuminates when you switch
the ignition on.
immediately add oil.
7. Reinstall the dipstick. Make sure it is
fully seated.
421
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
