Maintenance
2
1
2
E264496
1. Use a suitable tool, for example a small
flat blade screwdriver, to carefully raise
the center pin and then remove the trim
clip.
E183236
2. Disengage the wiper blade from the
wiper arm.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
2. Remove the screws that secure the
lamp assembly.
3. To install, reverse the removal
procedure.
Note: Make sure that the wiper blade locks
into place.
E249609
REMOVING A HEADLAMP
3. Carefully lift the rear of the headlamp
up to disengage it from the lower fixing
point.
WARNING: Switch the lamps and
the ignition off. Failure to do so could
result in serious personal injury.
4. Remove the headlamp.
Note: Take care when removing the lamp.
There are rupture points adjacent to the
headlamp securing screws that are designed
to separate under impact.
WARNING: Lamps and associated
components become hot when in use.
Let them cool down before you remove
them.
5. Disconnect the electrical connector.
6. To install, reverse the removal
procedure.
431
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
