Maintenance -> Removing a Rear Lamp-4-Door for Your Ford Focus 4 Door 2023

Maintenance  
6. To install, reverse the removal  
REMOVING A REAR LAMP - 4-  
DOOR  
procedure.  
Reversing Lamp and Rear Lamp  
1. Open the liftgate.  
WARNING: Lamps and associated  
components become hot when in use.  
Let them cool down before you remove  
them.  
Brake Lamp, Rear Lamp and  
Direction Indicator  
1
2
E340801  
2. Firmly pull the soft trim panel at the  
ten fixing points to unclip the soft trim  
panel.  
Note: Use a screwdriver to gently lift the  
panel.  
E
1. Press the panel as indicated.  
2. Carefully remove the panel.  
4
3
E
3. Turn the wing nut counterclockwise  
and remove it.  
3. Remove the bolt that secures the lamp  
assembly.  
4. Gently pull the lamp assembly away  
from the vehicle.  
5. Disconnect the electrical connector.  
433  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Maintenance  
Headlamp  
You may have to remove the headlamp  
assembly prior to replacing a bulb. See  
Removing a Headlamp (page 431).  
Halogen Headlamp  
4. Disconnect the electrical connector.  
A
A
Daytime running lamps.  
B
A
C
5. Remove the lamp.  
6. To install, reverse the removal  
procedure.  
CHANGING A BULB  
E264499  
A
B
C
Headlamp low beam.  
Headlamp high beam.  
Front direction indicator.  
WARNING: Switch the lamps and  
the ignition off. Failure to do so could  
result in serious personal injury.  
WARNING: Lamps and associated  
components become hot when in use.  
Let them cool down before you remove  
them.  
Headlamp Low Beam  
1. Turn the cover counterclockwise and  
remove it.  
Use the correct specification bulb. See  
Bulb Specification Chart (page 489).  
434  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing