Roadside Emergencies
Remove the jumper cables in the reverse
Rear Towing Point
order that they were connected.
Note: Do not switch the headlamps on
when disconnecting the cables. The peak
voltage could blow the bulbs.
TOWING POINTS
Front Towing Point
E265229
1. Gently press the top of the towing eye
attachment point cover inward.
2. Gently lift it upward and then pull it
straight out.
Note: The towing eye attachment point
cover has a small lanyard to keep it
attached to the bumper.
E265228
Attaching the Towing Eye
1. Gently press and release the towing
eye attachment point cover at the
position indicated.
WARNING: Make sure that the
towing eye is fully tightened. Failure to
follow this instruction could result in
personal injury.
2. Gently pull it straight out.
Note: The towing eye attachment point
cover has a small lanyard to keep it
attached to the bumper.
WARNING: You must switch the
ignition on when your vehicle is being
towed.
392
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing