Towing -> Tow Ball-Vehicles With: Retractable Tow Ball for Your Ford Focus 4 Door 2023

Towing  
Remove the trailer wiring plug from the  
TOW BALL - VEHICLES WITH:  
RETRACTABLE TOW BALL  
trailer wiring connection socket when  
not in use. Failure to do so may result  
in corrosion of the trailer wiring  
connection socket. Regularly clean the  
trailer wiring connection socket and  
make sure the socket cover is fully  
closed.  
WARNING: Do not exceed the  
lowest rating capacity for your vehicle or  
trailer hitch. Overloading your vehicle or  
trailer hitch can impair your vehicle  
stability and handling. Failure to follow  
this instruction could result in the loss of  
control of your vehicle, personal injury or  
death.  
If you use a high pressure water jet to  
clean your vehicle, disconnect the  
trailer wiring plug. Do not aim the water  
jet directly at the trailer wiring  
connection socket. We recommend  
that you detach the tow ball arm  
before washing your vehicle.  
WARNING: Do not cut, drill, weld  
or modify the trailer hitch. Modifying the  
trailer hitch could reduce the hitch rating.  
A
B
C
D
E265649  
A
B
C
D
Trailer safety cable attachment point.  
Trailer wiring connection socket.  
Tow ball arm in tow position.  
Tow ball arm in stowed position.  
Do not touch the tow ball arm when it is  
deploying to the released position.  
Do not use the tow ball arm if no tones  
sound when deploying the tow ball arm or  
when you lock it into position. Have your  
vehicle checked as soon as possible.  
Do not disassemble or repair the tow ball  
arm or mechanism.  
Deploying the Tow Ball Arm  
Do not use your foot or any tools to deploy  
the tow ball arm.  
383  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Towing  
The tow ball arm does not deploy if any of  
the following occur:  
3. Manually move the tow ball arm into  
the tow position. Make sure the tow  
ball arm locks into position.  
Note: The LED on the button stops flashing  
and a double tone sounds when the tow  
ball arm locks into position.  
Note: A warning tone sounds for up to 30  
seconds if the tow ball arm remains in an  
unlocked position.  
Your vehicle is moving.  
The trailer wiring connection socket  
has a trailer wiring plug attached to it.  
The vehicle battery is not fully charged.  
If the deploy process is interrupted, for  
example tow ball arm movement is  
obstructed or the power supply is lost, the  
system must be reset. To reset the system  
fully repeat the process.  
2x  
Check the following:  
Make sure the tow ball arm is fully  
locked. It must not move if jerked or  
when you attach a trailer.  
E237201  
The LED is not flashing and no warning  
1. Press the button. It is on the right hand  
side of the luggage compartment.  
tones sound.  
Note: If these cannot be met, do not use  
the tow ball arm. Have your vehicle checked  
as soon as possible.  
Note: The LED on the button illuminates  
and a double tone sounds.  
Retracting the Tow Ball Arm  
You must retract the tow ball arm when  
not in use.  
Do not use your foot or any tools to retract  
the tow ball arm.  
Do not touch the tow ball arm when it is  
E265650  
retracting to the released position.  
2. Press the button again within four  
seconds to deploy the tow ball arm to  
the released position.  
Note: The LED on the button flashes and a  
series of tones sound when the tow ball arm  
deploys and reaches the released position.  
Note: If you do not press the button again  
within four seconds, the system signals  
completion without deploying the tow ball  
arm. If the LED rapidly flashes and a high  
pitch tone sounds, repeat the process.  
Never retract the tow ball arm with a trailer  
attached. This can cause damage not  
covered by the vehicle Warranty.  
The tow ball arm does not retract if any of  
the following occur:  
Your vehicle is moving.  
The trailer wiring connection socket  
has a trailer wiring plug attached to it.  
The vehicle battery is not fully charged.  
384  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Towing  
1. Disconnect the trailer wiring plug and  
Note: The LED on the button stops flashing  
and a double tone sounds when the tow  
ball arm locks into position.  
unhitch the trailer or load carrier.  
Note: A warning tone sounds for up to 30  
seconds if the tow ball arm remains in an  
unlocked position.  
Tow Ball Arm Guidelines  
The tow ball arm mechanism is  
maintenance free. Do not grease or oil  
the mechanism.  
2x  
Remove the trailer wiring plug from the  
trailer wiring connection socket when  
not in use. Failure to do so may result  
in corrosion of the trailer wiring  
connection socket. Clean the trailer  
wiring connection socket regularly and  
make sure the socket cover is fully  
closed.  
E237201  
2. Press the button. It is on the right hand  
side of the luggage compartment.  
Note: The LED on the button illuminates  
and a double tone sounds.  
If you use a high pressure water jet to  
clean your vehicle, disconnect the  
trailer wiring plug. Do not aim the water  
jet directly at the trailer wiring  
connection socket. We recommend  
that you retract the tow ball arm before  
washing your vehicle.  
E265650  
TOWING THE VEHICLE ON  
FOUR WHEELS - 6-SPEED  
AUTOMATIC TRANSMISSION  
3. Press the button again within four  
seconds to retract the tow ball arm to  
the released position.  
Note: The LED on the button flashes and a  
series of tones sound when the tow ball arm  
retracts and reaches the released position.  
Note: If you do not press the button again  
within four seconds, the system signals  
completion without retracting the tow ball  
arm. If the LED rapidly flashes and a high  
pitch tone sounds, repeat the process.  
4. Manually move the tow ball arm into  
the stowed position. Make sure the tow  
ball arm locks into position.  
WARNING: You must switch the  
ignition on when your vehicle is being  
towed. Failure to follow this warning  
could seriously increase the risk of injury  
or death.  
WARNING: You must make sure  
the transmission selector lever is placed  
in position N. Failure to follow this  
warning could damage the transmission  
and may lead to a crash or injury.  
385  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing