Vehicle Care -> Cleaning the Exterior for Your Ford Focus 4 Door 2023

Vehicle Care  
Cleaning Chrome, Aluminium or  
CLEANING THE EXTERIOR  
Stainless Steel  
Cleaning the Exterior Precautions  
We recommend that you only use a car  
shampoo, a soft cloth and water on  
bumpers and other chrome, aluminium or  
stainless steel parts.  
Note: For additional information and  
assistance, we recommend that you contact  
an authorized dealer.  
Immediately remove fuel spillages, AdBlue  
residuals, bird droppings, insect deposits  
and road tar. These may cause damage to  
your vehicles paintwork or trim over time.  
Remove any exterior accessories, for  
example antennas, before entering a car  
wash.  
Note: Rinse the area well after cleaning.  
Note: Do not use abrasive materials, for  
example steel wool or plastic pads, as they  
can scratch these surfaces.  
Cleaning Headlamps and Rear  
Lamps  
We recommend that you only use cold or  
lukewarm water containing car shampoo  
to clean the headlamps and the rear  
lamps.  
Note: Do not use chrome cleaner, metal  
cleaner or polish on wheels or wheel covers.  
Cleaning Wheels  
Do not scrape the lamps.  
Do not wipe lamps when they are dry.  
Only use a recommended wheel and tire  
cleaner to clean the wheels weekly. For  
additional information and assistance, we  
recommend that you contact an  
authorized dealer.  
Cleaning Windows and Wiper  
Blades  
To clean the windshield and wiper blades:  
1. Use a sponge to remove heavy  
deposits of dirt and brake dust.  
2. Rinse well after cleaning.  
Clean the windshield with a  
non-abrasive glass cleaner.  
Note: Do not apply a cleaning chemical to  
warm or hot wheel rims and covers.  
Note: When cleaning the interior of the  
windshield, avoid getting any glass cleaner  
on the instrument panel or door panels.  
Wipe any glass cleaner off these surfaces  
immediately.  
If you intend on parking your vehicle for an  
extended period after cleaning the wheels  
with a wheel cleaner, drive your vehicle for  
a few minutes before parking your vehicle.  
This reduces the risk of corrosion of the  
brake discs, brake pads and linings.  
Clean the wiper blades with washer  
fluid or water applied with a soft  
sponge or cloth.  
Do not clean the wheels when they are hot.  
Note: Do not use razor blades or other  
sharp objects to clean or remove decals  
from the inside of the heated rear window.  
This can cause damage not covered by the  
vehicle Warranty.  
Note: Some car washes could damage  
wheel rims and covers.  
Note: Using non-recommended cleaners,  
harsh cleaning products, chrome wheel  
cleaners or abrasive materials could  
damage wheel rims and covers.  
440  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing  
Vehicle Care  
CleaningtheEngineCompartment  
Cleaning Camera Lenses and  
Sensors  
Use a vacuum cleaner to remove debris  
from the screen area below windshield.  
We recommend that you only use  
lukewarm or cold water and a soft cloth  
to clean the camera lens and sensors.  
Note: If you are not familiar with the parts  
around the engine do not wash the engine  
compartment. Avoid frequent engine  
washes.  
Note: Do not pressure wash camera lens  
and sensors.  
When washing the engine compartment:  
Cleaning the Underbody  
Flush the complete underside of your  
vehicle frequently. Keep body and door  
drain holes free from packed dirt.  
Rear suspension components may require  
regular cleaning with a power washer or a  
thorough rinse with a strong stream of  
water if the vehicle is operated in dusty or  
muddy environments. Rear leaf springs or  
other suspension components may emit  
squeaking or popping noises while  
operating the vehicle if particles, such as  
dirt, rocks, or other debris, are present in  
the components.  
Never wash or rinse the engine while it  
is hot or running.  
Never wash or rinse any ignition coil,  
spark plug wire or spark plug well.  
Cover the battery, power distribution  
box, and air filter assembly to prevent  
water damage.  
Note: If your vehicle has an engine cover  
remove the cover before application of  
shampoo and degreaser.  
Spray an approved engine shampoo  
and degreaser on all parts that require  
cleaning and rinse with water.  
Cleaning Stripes or Graphics  
It is recommended to wash your vehicle by  
hand however, pressure washing may be  
used under the following conditions:  
CLEANING THE INTERIOR  
Cleaning the Instrument Panel  
Use a spray with a 40° wide spray  
angle pattern.  
WARNING: Do not use chemical  
solvents or strong detergents when  
cleaning the steering wheel or  
instrument panel to avoid contamination  
of the airbag system.  
Keep the nozzle at a 305 mm (12 in)  
distance and 90° angle to your  
vehicle's surface.  
Do not use water pressure higher than  
14,000 kPa (2,000 psi).  
We recommend that you only clean the  
instrument panel and cluster lens with a  
damp soft cloth. Dry the area with a clean,  
soft cloth.  
For additional information and assistance,  
we recommend that you contact an  
authorized dealer.  
Do not use water hotter than 82°C  
(179°F).  
Note: Holding the pressure washer nozzle  
at an angle to the vehicle's surface may  
damage graphics and cause the edges to  
peel away from the vehicle's surface.  
441  
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing