Wheels and Tires
7. Carefully install the wheel trim.
TIRE PRESSURES -
EXCLUDING: ACTIVE/ST
The recommended tire inflation pressures
are on the tire information label on the
driver side B-pillar.
Check all tire pressures when they are cold,
at least once every two weeks.
E145950
Note: You may need to remove the spare
wheel from the spare wheel well to check
the tire pressure.
1. Inspect the wheel pilot bore (A) and
mounting surface prior to installation.
Remove any visible corrosion or loose
particles.
A
B
C
D
E
2. Install the wheel.
3. Install the lug nuts finger tight.
x x x x x x
Note: Make sure that the cones on the lug
nuts are against the wheel.
x x x x x x x x
x x x x x x
x x x x x x
x x x x x x x x
x x
1
F
I
H
G
4
3
E254054
A
B
C
D
E
F
G
H
I
Tire size.
Vehicle model.
Front tire pressure.
Rear tire pressure.
Vehicle load.
Measure unit.
Spare wheel tire pressure.
Intended constant vehicle speed.
Spare wheel tire size.
2
5
E75442
4. Partially tighten the lug nuts in the
sequence shown.
5. Lower your vehicle and remove the
vehicle jack.
6. Fully tighten the lug nuts in the
sequence shown. See Lug Nuts (page
462).
457
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
