Get Windows Guide for Ford Focus 4 Door 2023

Windows

2. Press and hold the window control

OPENING AND CLOSING THE

WINDOWS

switch until the window is fully open.

Keep the window control switch

pressed for a few seconds.

3. Lift and hold the window control switch

until the window is fully closed. Keep

the window control switch held for a

few seconds.

4. Press and hold the window control

switch until the window is fully open.

Keep the window control switch

pressed for a few seconds.

5. Lift and hold the window control switch

until the window is fully closed. Keep

the window control switch held for a

few seconds.

WARNING: Do not leave children

unattended in your vehicle and do not

let them play with the power windows.

Failure to follow this instruction could

result in personal injury.

WARNING: When closing the

power windows, verify they are free of

obstruction and make sure that children

and pets are not in the proximity of the

window openings.

Press the window control switch

to open the window. Lift the

window control switch to close

the window.

Note: The power windows operate with the

ignition on, and for several minutes after you

switch the ignition off or until you open a

front door.

Note: Repeat the procedure if the window

does not close when you use one-touch.

GLOBAL OPENING AND

CLOSING

What Is Global Opening and

Closing

To reduce wind noise or pulsing noise when

one window is open, slightly open the

opposite window.

You can use the remote control to operate

the windows with the ignition off.

One-Touch Open

Fully press the window control switch and

release it. Press again or lift it to stop the

window.

Using Global Opening

1. Press and release the unlock button on

the remote control.

One-Touch Close

Fully lift the window control switch and

release it. Press again or lift it to stop the

window.

2. Press and hold the unlock button on

the remote control.

3. Release the button when the windows

and moonroof start to open.

Note: The moonroof stops in the vent

Resetting One-Touch Close

position.

Carry out all steps within 30 seconds of

Press the lock or the unlock button on the

starting the sequence.

remote control to stop global opening.

1. Close the window.

Note: You can use global opening for a

short period of time when you unlock your

vehicle using the remote control.

125

Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing

Windows

Switching Global Opening On and

Switching Global Closing On and

Off - Vehicles With: 4.2 Inch

Instrument Cluster Display Screen

1. Using the information display controls

on the steering wheel, select Settings.

2. Select Vehicle settings.

3. Select Windows.

4. Switch Global open on or off.

2. Select Vehicle settings.

3. Select Windows.

4. Switch Global close on or off.

Switching Global Opening On and

Off - Vehicles With: 12.3 Inch

Switching Global Closing On and

Off - Vehicles With: 12.3 Inch

Instrument Cluster Display Screen

1. Press the menu button on the steering

wheel to enter the information display

main menu.

1. Press the menu button on the steering

wheel to enter the information display

main menu.

2. Select Settings.

3. Select Vehicle.

4. Select Windows.

5. Switch Global open on or off.

4. Select Windows.

5. Switch Global close on or off.

Using Global Closing

WINDOW BOUNCE-BACK

What Is Window Bounce-Back

WARNING: When closing the

power windows, verify they are free of

obstruction and make sure that children

and pets are not in the proximity of the

window openings.

The window stops and reverses if it detects

an obstruction when closing.

Overriding Window Bounce-Back

1. Press and hold the lock button on the

remote control.

WARNING: If you override

bounce-back, the window does not

reverse if it detects an obstacle. Take

care when closing the windows to avoid

personal injury or damage to your

vehicle.

2. Release the button when the windows

and moonroof start to close.

Press the lock or the unlock button on the

remote control to stop global closing.

Note: Bounce-back is on during global

closing. See What Is Window

Bounce-Back (page 126).

1. Close the window until it reaches the

point of resistance and let it reverse.

126

Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing

Windows

2. Lift the control within five seconds to

LOCKING THE REAR WINDOW

CONTROLS

Press the window control switch

to lock or unlock the rear window

controls. It illuminates when you

lock the rear window controls.

override bounce-back and close the

window. Bounce-back is now disabled

and you can close the window

manually.

Note: The window goes past the point of

resistance and you can fully close it.

Note: If the window does not close, have

your vehicle checked as soon as possible.

Resetting Window Bounce-Back

WARNING:Bounce-back is off until

you reset the memory. Take care when

closing the windows to avoid personal

injury or damage to your vehicle.

If you have disconnected the battery, you

must reset the bounce-back memory

separately for each window.

Carry out all steps within 30 seconds of

starting the sequence.

1. Close the window.

2. Press and hold the switch until the

window is fully open. Keep the switch

pressed for a few seconds.

3. Lift and hold the switch until the

window is fully closed. Keep the switch

held for a few seconds.

4. Press and hold the switch until the

window is fully open. Keep the switch

pressed for a few seconds.

5. Lift and hold the switch until the

window is fully closed. Keep the switch

held for a few seconds.

Note: Repeat the procedure if the window

does not close when you use one-touch.

127

Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing

Windows for Your Ford Focus 4 Door 2023

Popular Manuals